CITB has developed this standard in discussion with industry
Minimum 1 day of 6 learning hours
The purpose of this standard is to provide the candidate with the knowledge of chemical and water cleaning used in façade preservation, in relation to: health, safety, and the environment.
The scope of this standard covers:
- personal protective equipment (PPE) as per legislation, site rules, and risk assessment
- select, maintain, and store PPE
- temperature effects on: water, chemicals, equipment, and façade
- handling and storage of chemicals
- how incorrectly-selected/applied chemicals affect the façade
- pre-wash, dwell times, and neutralisation
- spillages and injuries
- COSHH safety data sheets (SDS)
- how to control run-off of chemicals, bi-products, and water
- handling spillages and emergencies
- surface protection.
Training delivered against this standard would be relevant to the following occupational groups:
- operative and craft
There are no candidate pre-requisites as part of this standard.
As a minimum, course instructors must be able to demonstrate that, in relation to this standard, they have:
- A train the trainer or instructional techniques course certificate
- Successfully completed training to this standard
- At least 2 years relevant industrial experience
- A verifiable CV.
The following method(s) may be used in the delivery of this standard:
All materials and equipment must be of a suitable quality and quantity for candidates to achieve learning outcomes, and must comply with relevant legislation.
The class size and candidate/instructor ratio must allow training to be delivered in a safe manner and enable candidates to achieve the learning outcomes.
This standard is considered to contain 51 per cent or more theoretical training.
For the successful completion of training, candidates must complete an end of course practical assessment or knowledge test that measures the learning outcomes and has a pass or fail criteria.
Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.
CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the Training Standard.
Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk-based analysis. They will also be visited annually by the CITB quality assurance team.
There are no mandatory renewal or recommended refreshment requirements for this standard.
Either on request or in 3 year(s) from approval date.
|The candidate will be able to ||Additional guidance to support learning outcome
Define appropriate PPE as per legislation, site rules, and risk assessment
- SDS sheets for COSHH
- local authority requirements
- spill response procedures
Company procedure examples for:
- spill response
- first aid
Select, maintain, and store PPE
Describe how temperature effects: water, chemicals, equipment, and the façade
Describe the handling and storage requirements of: acids, alkalis, and solvents
Describe how incorrectly-selected/applied chemicals can affect the façade
Describe pre-wash, dwell times, and neutralisation
Describe how to control of run-off and comply with local authority requirements for waste bi-products
Describe how to respond to spillages and injuries
Interpret COSHH safety data sheets (SDS)
Describe how to control the run-off of chemicals and water
Describe where company procedures are for handling spillages and emergencies
Describe surface protection
Additional information about this standard
HSE Water jetting guides
Training at height
- BS 8454:2006 Code of practice for delivery of training & education for work at height and rescue
Advisory Committee for Roof Safety
Work at Height Safety Association
- View WAHSA technical guidance notes. These are a free resource, provided and maintained by WAHSA and its member companies for reference. They assist specifiers, managers, and end users of fall protection equipment.
Health and Safety Executive (HSE) Working at height guides
See relevant legislation
- Health and Safety at Work etc Act (HSWA) 1974
- The Work at Height Regulations (WHR) 2005
- Work at Height (Amended) 2007
- Personal Protection Equipment (PPE) Regulations 2002
- Personal Protection Equipment (PPE) at Work Regulations 1992
- Provision and Use of Work Equipment Regulations (PUWER) (1998 UK 1999 NI)
- Control of Substances Hazardous to Health Regulations (COSHH )2002
- Lifting Operations and Lifting Equipment Regulations (LOLER) 1998
- Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (RIDDOR ) 1995
- Construction (Design and Management) Regulations (CDM) 2015
- Construction (Health, Safety and Welfare) Regulations 1996
- Manual Handling Operations Regulations 1992 as amended 2002
- Control of Noise at Work Regulations 2005
- Control of Vibration at Work Regulations 2005
- Building and Buildings, England and Wales: The Building Regulations 2010.
- The Building (Scotland) Regulations 2004
- Statutory Rules of Northern Ireland.
British standards masonry
View British standards on the BSI website
- BS 8000: 2013 Workmanship on construction sites.
- BS 8437: 2005 Code of practice for selection, use and maintenance of personal protection systems
- BS EN 12810-1:2003. Facade scaffolds made of prefabricated components. Product specifications
- BS EN 12810-2:2003. Facade scaffolds made of prefabricated components. Structural design
- BS EN 12811-1:2003. Temporary works equipment. Scaffolds. Performance and general design