Facebook Pixel
Skip to content
< Back to search results

Tools and equipment used with single ply roofing

We have doubled the grant rates for short course tiers 1 – 3. To address rising costs, you can now receive higher rates on course achievements from 1st April 2023

Grant Tier

Achievement date before 1 April 2023

Achievement date on or after 1 April 2023

Grant Tier 1

Grant Tier 1 Refresher

£30

£15

£60

£30

Grant Tier 2

Grant Tier 2 Refresher

£70

£35

£140

£70

Grant Tier 3

Grant Tier 3 Refresher

£120

£60

£240

£120
  • Last updated: 11 May 2022
  • Grant rate/tier: £60 (Tier 1)
  • Grant code: GET1771

Overview

The purpose of this standard is to provide the candidate with the knowledge of how to set up, use, check, maintain and store, hand & power tools and equipment including personal protective equipment (PPE), for installation and maintenance of single ply roofing.
Find a course for this standard

Duration

½ day of 3 learning hours

Purpose/scope

The purpose of this standard is to provide the delegate with the knowledge of how to set up, use, check, maintain and store, hand & power tools and equipment including personal protective equipment (PPE), for installation and maintenance of single ply roofing:

Scope:

  • hazards, risks, and controls of tools and equipment 
  • how to safely: set up, use, maintain, check, and store tools & equipment including:  
    • mechanical fixing tools  
    • welding tools 
    • solvent welding tools 
    • adhered membranes tools 
    • sundry tools and equipment  
    • mechanical equipment 
    • access equipment 
    • safety equipment 
    • emergency equipment 
  • health and safety responsibilities for employers and employees 
  • main legislation, codes of practice, standards, and guidance 

Occupational relevance

Training delivered against this standard would be relevant to the following occupational group(s):

  • operative and craft
  • supervision

Delegates pre-requisites

There are no delegate pre-requisites as part of this standard, however a basic knowledge of single ply roofing terminology and techniques would be beneficial.

Instruction/supervision

As a minimum, course trainers must be able to demonstrate that, in relation to this standard, they have:

  • an award in education and training (or equivalent, as per requirements for approved training organisations)
  • successfully completed training to this standard
  • at least 2 years relevant industrial experience
  • a verifiable CV

Delivery

Delivery may be in an on or off the job environment.

All materials and equipment must be of a suitable quality and quantity for delegates to achieve learning outcomes and must comply with relevant legislation.

The class size and delegate/trainer ratio must allow training to be delivered in a safe manner and enable delegates to achieve the learning outcomes.

The following delivery methods may be used in the delivery of this standard:

  • classroom

This standard is considered to contain 51% or more theoretical learning.

This standard is considered to be set at an intermediate level.

Assessment

Methods of assessment considered appropriate for training delivered against this standard are:

For the successful completion of training, delegates must complete an end of course practical assessment or knowledge test that measures all learning outcomes and has a pass or fail criteria.

Where this training is assessed using multiple-choice questions, a minimum of 10 questions must be asked and delegates are required to achieve an overall pass mark of at least 80%.

Quality assurance

Assured

Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.

CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the training standard.

Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk-based analysis. They will also be visited annually by the CITB quality assurance team.

Renewal

There are no mandatory renewal or recommended refresher requirements for this standard.

Classification

Lifetime

(Please note standards using this classification will only be grant aided once per delegate)

Approval date

January 2022

Review cycle

On request or 3 years from approval date.

Learning outcomes to be refreshed

Learning outcomes

The delegate will be able to:

Additional guidance to support learning outcome

 

Describe the hazards, risks, and controls of tools and equipment including:

  • earth leakage protection (residual current device), hot parts, dust, vibration, noise, vision, sharp edges, extension and power leads (connectors, trips and testing), chemicals, hot work permits

Example of risk assessment

SDS sheets for chemicals

Harness with lanyard & shock absorber

Sample hot work permit

Describe how to safely set up, use, maintain, check, and store tools & equipment including:

  • mechanical fixing tools: hammer drills, cordless drills, screw guns, nut setters, accessories, drill bits, hole saws, and induction welders. including how to set and use the clutch and depth setting for power drills.
  • welding tools: hand hot air tools, hot air automatic welders, wide slot nozzles, screwdrivers, wire brushes, one arm silicon white/blue tape pressure rollers, metal alloy pressure rollers, lap sealant, and transformers.
  • solvent welding tools: solvent bottle & brush, and lap sealant bottle & nozzle.
  • adhered membranes tools: water-filled rollers, soft rollers, trays, and trigger canisters.
  • sundry tools and equipment: chalk lining, chamfer knives, hammers, saws, chisels, tape measure, trimming knives, levels, tin snips, broom, sealant gun, and screwdrivers.
  • mechanical equipment: hoists, scabblers, grinders, bitumen heaters, gas torches.
  • access equipment: fixed scaffold with ladder/steps, moveable tower scaffold with internal ladder, edge protection, internal stairs, and tied ladders.
  • safety equipment: edge protection, access scaffolding, access platforms, accident record book, hard hat, gloves, eyewear, ear defenders, wrist band protector, footwear, hi-visibility, coveralls, roof anchors, and harness with lanyard & shock absorber.
  • emergency equipment: fire extinguisher (foam/powder), bucket of sand/water, first-aid equipment, radio/phone communications.

Actual tools and equipment

 

Photos/illustrations/videos of how to: set up, use, check, maintain and store

 

How to quarantine damaged or broken tools and equipment

 

Manufacturer’s operating and maintenance manuals and sales brochures

 

Tool catalogues

Good and bad practice

Describe the health and safety responsibilities for employers and employees

PDF/printed extracts from H&S legislation.

List the main types of information for safe working

Safety legislation (H&SAWA, COSHH, PUWER, LOLER, Work at Height), HSE guidance, manufacturer’s documents, British/EN/ISO Standards, codes of practice, association guidance, building regulations, SDS sheets, company procedures, risk assessments

Additional information about this standard

Single Ply Roofing Association (SPRA)

SPRA sets the design standards for single ply roofing in the UK. You can view the following free guides on the SPRA website.

  • Design guide for single ply roofing
  • Acoustic control
  • Adhesives
  • Falls and drainage for single ply roofs (S10-10)
  • Guarantees – Guidance for clients and designers (S4-17)
  • Homeowners guide 2017 (S12-17)
  • Membrane product substitution checklist (S3-17)
  • Non-destructive testing of single ply membrane roofing coverings (S8-17)
  • Protection of single ply membrane roofs-guidance and checklist (SDG13-17)
  • Recycling scoping study (2017)
  • Safety – Design considerations for reduced risk (S5-17)
  • Sealants in single ply roofing (S7-17)
  • Ten reasons to specify SPRA contractor (S2-17)
  • Welding guidance (S14-18)
  • Wind load design requirements for single ply roofing (S11b-17)
  • Wind loading – single ply roofing guide and checklist (S11a-16)

SPRA also publishes ‘Component quality schemes’ for materials and equipment. These take existing standards (BS and BS-EN) and apply specific levels of performance required in single ply applications:

  • Expanded polystyrene insulation boards for inverted roofs (CQS2B-17)
  • Expanded polystyrene insulation boards for roofing (CQS2A-17)
  • Extruded polystyrene insulation boards for roofing (CQS3-17)
  • Factory-manufactured single ply membrane gutters (CQS8-17)
  • Fall protection anchor devices (CQS9-17)
  • Mechanical fasteners for attachment of insulation and membranes (CQS5-17)
  • Rock mineral wool insulation boards for roofing (CQS4-17)
  • Roof access hatches (CQS7-17)
  • Rooflights (CQS6-17)
  • SPRA-IMA quality standards (CQS1-17)
  • Vacuum insulated roof panels (VIPS) for roofing applications (CQS10-17)

British Flat Roofing Council

  • Flat roofing: Design and good practice 1993

Training at height

  • BS 8454:2006 Code of practice for delivery of training & education for work at height and rescue

Work at Height Safety Association

  • View WAHSA technical guidance notes. These are a free resource, provided and maintained by WAHSA and its member companies for reference. They assist specifiers, managers, and end users of fall protection equipment. 

Health and Safety Executive (HSE) Working at height guides

British-European standards

You can view British and European standards on the BSI website

Note: Currently there are no British standards that cover polymeric single ply waterproofing membranes.

  • BS 476-3: 2004. Fire tests on building materials and structures. Classification and test methods for roofs
  • BS-EN 1991-1-2 6399: Part 2:1997 Code of practice for wind loads
  • BS-EN 1991-1-4: 2005 + A1:2010 Eurocode 1. Actions on structures. General actions. Wind actions
  • BS 4841-4: 2006. Rigid polyurethane (PUR) and polyisocyanurate (PIR) products for building end-use applications. Specification for laminated insulation boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under non-bituminous single-ply roofing membranes
  • BS 6399-2:1997. BS6399-2: 1997 Loading for buildings. Part 2: Code of practice for wind loads
  • BS 6229: 2003 Code of practice for flat roofs with continuously supported coverings
  • BS 8217: 2005 Reinforced membranes for roofing - Code of practice
  • BS 8437: 2005 Code of practice for select/use/maintain personal protection systems and equipment
  • BS 8454: 2006 Code of practice for delivery of training & education for work at height and rescue
  • BS-EN 12056-3: 2001 Part 3 Gravity drainage systems in buildings. Roof drainage, layout & calcs
  • BS-EN 13956: 2003 Flexible (plastic and rubber) sheets for roof waterproofing. Definitions/characteristics
  • HB 10139:1997. Wind loading ready reckoner for BS 6399: Part 2: 1997
  • DD CEN / TS 1187: 2012 Test methods for external fire exposure to roofs

Legislation

See relevant legislation

  • The Work at Height Regulations (WHR) 2005
  • Statutory Rules of Northern Ireland
  • The Building (Scotland) Regulations 2004
  • Building and Buildings, England and Wales: The Building Regulations 2010
  • Control of Substances Hazardous to Health Regulations (COSHH) 2002
  • Health and Safety at Work etc Act 1974

Related standards

  • Preparation of roof decking for existing roof
  • Building regulations and standards
  • Application details of single ply roofing
  • Types of roof systems
  • Thermal insulation for single ply roofing
  • Testing and repair
  • Single ply roofing introduction
  • Single ply roofing advanced
  • Waterproofing membranes
  • Design principles of single ply roofing
  • Methods of attachment
  • Waterproof membrane roofing systems installation

Grants

Find out how to claim a grant for short duration training courses

ATO course accreditation

Find out how to accredit a training course to a standard.

Related standards