Installing floors within timber frame erections


Overview
The purpose of training delivered against this standard is to provide candidates with an introduction to installing floors within timber frame erections.

CITB has developed this standard in discussion with industry

Duration

Minimum 2 days of 6 learning hours

Purpose/scope

The purpose of training delivered against this standard is to provide candidates with an introduction to installing floors within timber frame erections.

The scope includes:

  • identification of different flooring systems
  • health and safety implications of each system
  • identification of joist types
  • installation methods
  • installing cassette floor decks
  • installing loose floor joists.

Occupational relevance

Training delivered against this standard would be relevant to the following occupational groups:

  • operative and craft
  • supervision.

Candidate pre-requisites

There are no candidate pre-requisites as part of this standard.  However, a basic knowledge of building terminology and techniques would be beneficial.

Instruction/supervision

As a minimum, course instructors must be able to demonstrate that, in relation to this standard, they have:

  • A train the trainer or instructional techniques course certificate
  • Successfully completed training to this standard 
  • At least 2 years relevant industrial experience
  • A verifiable CV.

Delivery

Delivery may be in an on or off the job environment.

All materials and equipment must be of a suitable quality and quantity for candidates to achieve learning outcomes, and must comply with relevant legislation.

The class size and candidate/instructor ratio must allow training to be delivered in a safe manner and enable candidates to achieve the learning outcomes.

This standard is considered to contain 51 per cent or more practical training.

Assessment

For the successful completion of training, the trainer will be required to make a declaration of the learner’s contribution during the course and that they are confident the learner has understood the content of the course.

Quality assurance

Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard. 

CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the Training Standard. 

Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk-based analysis. They will also be visited annually by the CITB quality assurance team.

Renewal/refresher

Health & safety executive (HSE), other relevant codes of practice or industry card scheme criteria recommend that the candidate completes a refresher of his/her training (i.e. to ensure their knowledge and/or skills are up to date) every 5 years.

Approval date

November 2018

Review cycle

Either on request or in 3 years from approval date.

Learning outcomes

The candidate will be able to:

  • Identify different flooring systems
  • Describe the safety implications of each flooring systems
  • Identify joist types
  • Describe installation methods
  • Install cassette floor decks
  • Install loose flooring.
Web design by S8080