Facebook tracking pixel

Concrete strength assessment - cores and indirect methods


Overview
This training standard is designed for candidates who supervise assessing hardened concrete for strength onsite primarily through core testing but with reference to other indirect non-destructive testing (NDT) methods.

CITB has developed this standard in discussion with industry

Duration

Minimum 1 day of 6 learning hours

Purpose/Scope

This training standard is designed for candidates who supervise assessing hardened concrete for strength onsite primarily through core testing but with reference to other indirect non-destructive testing (NDT) methods.

Scope:

  • characteristic strength of concrete
  • assessment of strength when concrete supply is in doubt
  • assessment for strength of specific locations where no information available
  • principles of core and NDT methods
  • planning for test locations and numbers
  • assessing core results
  • assessing in-direct NDT results
  • assessing core results in conjunction with in-direct NDT
  • review supplier and site pour records
  • actions in the event of non-compliant concrete.

Occupational relevance

Training delivered against this standard would be relevant to the following occupational group(s):

  • supervision
  • management and leadership.

Candidate pre-requisites

There are no candidate pre-requisites as part of this standard. However a basic knowledge and experience of concrete would be beneficial.

Instruction/Supervision

As a minimum, course instructors must be able to demonstrate that, in relation to this standard, they have:

  • a train the trainer or instructional techniques course certificate
  • successfully completed training to this standard
  • at least 2 years relevant industrial experience
  • a verifiable CV.

Delivery

Delivery may be in a classroom environment.

All materials and equipment must be of a suitable quality and quantity for candidates to achieve learning outcomes, and must comply with relevant legislation.

The class size and candidate/instructor ratio must allow training to be delivered in a safe manner and enable candidates to achieve the learning outcomes.

This standard is considered to contain 51% or more theoretical learning.

Assessment

For the successful completion of training, candidates must complete an end of course practical assessment or knowledge test that measures the learning outcomes and has a pass or fail criteria.  

Quality assurance

Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.

CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the training standard.

Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk based analysis. They will also be visited annually by the CITB quality assurance team.

Renewal/refresher

There are no mandatory renewal or recommended refreshment requirements for this standard. 

Approval date

November 2018

Review cycle

Either on request or in 3 years from approval date

Learning outcomes

The candidate will be able to: Additional guidance to support learning outcome

Explain difference between strength assessment
for doubts in supply and specific locations

BS EN 13791,  BS 6089,
Concrete Society CA47 Core testing

Plan assessment regime

Assess core and NDT results

Assess site and supplier records

Conclude and record outcomes


Additional information about this standard

Health & Safety Executive (HSE) guides:

Health & Safety at Work etc Act 1974

Health and safety in construction

Personal protective equipment a brief guide

PPE

PUWER

COSHH

RIDDOR

LOLER

CDM

Manual handling

Noise

Hand-arm vibration

Electrical

Legislation

http://www.legislation.gov.uk/:

  • Health and Safety at Work etc Act (HSWA) 1974
  • The Work at Height Regulations (WHR) 2005
  • Work at Height (Amended) 2007
  • Personal Protection Equipment (PPE) Regulations 2002
  • Personal Protection Equipment (PPE) at Work Regulations 1992
  • Provision and Use of Work Equipment Regulations (PUWER) (1998 UK 1999 NI)
  • Control of Substances Hazardous to Health Regulations (COSHH )2002
  • Lifting Operations and Lifting Equipment Regulations (LOLER) 1998
  • Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (RIDDOR ) 1995
  • Construction (Design and Management) Regulations (CDM) 2015
  • Construction (Health, Safety and Welfare) Regulations 1996
  • Manual Handling Operations Regulations 1992 as amended 2002.
Share