PREVIEW: Chemical cleaning equipment operation


Overview
This preview is for ATOs only. The purpose of this standard is to provide the candidate with the knowledge and skills to operate chemical cleaning equipment used for façade preservation.

This standard is available to ATOs to preview before it’s finally published. You should make sure your course matches these details. This standard will eventually supersede the existing standard in development. 

Until then, continue to publicise your courses against the existing title on the Construction Training Directory.

CITB has developed this standard in discussion with industry

Duration

Minimum 2 days of 6 learning hours

Purpose/scope

The purpose of this standard is to provide the candidate with the knowledge and skills to operate chemical cleaning equipment used for façade preservation.

The scope of this standard covers:

  • personal protective equipment (PPE), respiratory protective equipment (RPE), and safety controls
  • signage, protections, and barriers
  • jetting equipment use
  • cleaning chemicals: select, use, decant, and store
  • cleaning chemical procedures, specifications, and issues
  • job specifications
  • bunding materials
  • chemical application methods
  • work safely
  • local authority recycling/waste management.

Occupational relevance

Training delivered against this standard would be relevant to the following occupational groups:

  • operative and craft
  • supervision.

Candidate pre-requisites

There are no candidate pre-requisites as part of this standard.

Instruction/supervision

As a minimum, course instructors must be able to demonstrate that, in relation to this standard, they have:

  • A train the trainer or instructional techniques course certificate
  • Successfully completed training to this standard 
  • At least 2 years relevant industrial experience
  • A verifiable CV.

Delivery

The following method(s) may be used in the delivery of this standard:

  • classroom and workshop

All materials and equipment must be of a suitable quality and quantity for candidates to achieve learning outcomes, and must comply with relevant legislation.

The class size and candidate/instructor ratio must allow training to be delivered in a safe manner and enable candidates to achieve the learning outcomes.

This standard is considered to contain 51 per cent or more practical training.

Assessment

For the successful completion of training, candidates must complete an end of course practical assessment or knowledge test that measures the learning outcomes and has a pass or fail criteria.

Quality assurance

Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard. 

CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the Training Standard. 

Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk-based analysis. They will also be visited annually by the CITB quality assurance team.

Renewal/refresher

There are no mandatory renewal or recommended refreshment requirements for this standard.

Approval date

November 2018

Review cycle

Either on request or in 3 year(s) from approval date.

Learning outcomes

The candidate will be able to Additional guidance to support learning outcome

Select, use, maintain, and store PPE, RPE, and safety controls

Examples of:

  • job specifications
  • construction drawings

 

Videos in classroom

Practical demonstration in workshop

Candidate practice with supervision in workshop

 

Videos of good and bad practice

Examples of tools and equipment

Examples of operating and maintenance manuals

Select and install:

  • signage, protections and barriers

Select, set up, pre-use safety check, use, set down, store, and report defects for jetting equipment

Select, use, decant, and store cleaning chemicals as per COSHH SDS, including:

  • interpret COSHH safety data sheets (SDS)
  • handle, use, decant, and store chemicals safely
  • chemical types and characteristics for façade cleaning

Interpret and follow cleaning chemical procedures, specifications, and issues, including:

  • interpret RAMS specifying chemical cleaning operations
  • follow specification of works and request clarifications as needed
  • describe how incorrectly-selected/applied chemicals affect the façade
  • describe alternatives to chemical cleaning abrasive/water: laser system, ice systems, and façade gommage

Interpret and follow job specifications including:

  • source accurate project information from: RAMS, approved drawings, and COSSH/SDS sheets.
  • interpret specifications
  • select chemicals for cleaning façades

Select, use, and apply bunding materials

Safely apply chemicals including using:

  • brushes, spray equipment, and jetting units

Work safely including:

  • follow safe work practices/procedures
  • location of emergency procedures
  • identify hazards
  • reduce/eliminate risks
  • use controls
  • use PPE
  • specific hazards include: water, chemicals, barriers, heights, work platforms, slip, trip, fall, dust, vibration, noise, reduced vision, sharp edges, hot parts, pressurised liquid, abrasives, air pressure valve
  • keep a clean and tidy work area
  • earth leakage protection (residual current device, RCD)
  • extension and power leads (connectors, trips, testing)
  • petrol/diesel fuel (fire, fumes, spills)
  • first aid equipment
  • environmental safety

Examples of:

  • PPE
  • risk assessments
  • safe work practices/procedures
  • spills and clean up
  • environmental legislation
  • safety legislation
  • SDS sheets for COSHH
  • RAMS
  • emergency procedures
  • first aid equipment

Confirm and comply with local authority recycling/waste management

Environmental considerations for waste materials

Additional information about this standard

Heritage

HSE Water jetting guides

Training at height

  • BS 8454:2006 Code of practice for delivery of training & education for work at height and rescue

Advisory Committee for Roof Safety

Work at Height Safety Association

  • View WAHSA technical guidance notes. These are a free resource, provided and maintained by WAHSA and its member companies for reference. They assist specifiers, managers, and end users of fall protection equipment. 

Health and Safety Executive (HSE) Working at height guides

HSE guides

Legislation

See relevant legislation

  • Health and Safety at Work etc Act (HSWA) 1974
  • The Work at Height Regulations (WHR) 2005
  • Work at Height (Amended) 2007
  • Personal Protection Equipment (PPE) Regulations 2002
  • Personal Protection Equipment (PPE) at Work Regulations 1992
  • Provision and Use of Work Equipment Regulations (PUWER) (1998 UK 1999 NI)
  • Control of Substances Hazardous to Health Regulations (COSHH )2002
  • Lifting Operations and Lifting Equipment Regulations (LOLER) 1998
  • Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (RIDDOR ) 1995
  • Construction (Design and Management) Regulations (CDM) 2015
  • Construction (Health, Safety and Welfare) Regulations 1996
  • Manual Handling Operations Regulations 1992 as amended 2002
  • Control of Noise at Work Regulations 2005
  • Control of Vibration at Work Regulations 2005

Building regulations

  • Building and Buildings, England and Wales: The Building Regulations 2010.
  • The Building (Scotland) Regulations 2004
  • Statutory Rules of Northern Ireland.

British standards masonry

View British standards on the BSI website

  • BS 8000: 2013 Workmanship on construction sites.
  • BS 8437: 2005 Code of practice for selection, use and maintenance of personal protection systems
  • BS EN 12810-1:2003. Facade scaffolds made of prefabricated components. Product specifications
  • BS EN 12810-2:2003. Facade scaffolds made of prefabricated components. Structural design
  • BS EN 12811-1:2003. Temporary works equipment. Scaffolds. Performance and general design
Share