PREVIEW: Managing timber frame construction for home builders


Overview
This preview is for ATOs only. The purpose of training delivered against this standard is to provide candidates with an introduction to best practice in the management of timber frame erection on site.

This standard is available to ATOs to preview before it’s finally published. You should make sure your course matches these details. This standard will eventually supersede the existing standard in development. 

Until then, continue to publicise your courses against the existing title on the Construction Training Directory.

CITB has developed this standard in discussion with industry

Duration

Minimum 1 day of 6 learning hours

Purpose/scope

The purpose of training delivered against this standard is to provide candidates with an introduction to best practice in the management of timber frame erection on site.

The scope includes:

  • interpretation of standards for timber frame construction
  • managing a timber frame construction site
  • common defects associated with timber frame construction

Occupational relevance

Training delivered against this standard would be relevant to the following occupational groups:

  • operative and craft
  • supervision
  • management and leadership.

Candidate pre-requisites

Candidates should have spent a minimum of 3 months experience within the home building sector and have a basic knowledge of building terminology and techniques.

Instruction/supervision

As a minimum, course instructors must be able to demonstrate that, in relation to this standard, they have:

  • A train the trainer or instructional techniques course certificate
  • Successfully completed training to this standard 
  • At least 2 years relevant industrial experience
  • A verifiable CV.

Delivery

Delivery may be in an on or off the job environment.

All materials and equipment must be of a suitable quality and quantity for candidates to achieve learning outcomes, and must comply with relevant legislation.

The class size and candidate/instructor ratio must allow training to be delivered in a safe manner and enable candidates to achieve the learning outcomes.

This standard is considered to contain 51 per cent or more theoretical learning.

Assessment

For the successful completion of training, the trainer will be required to make a declaration of the learner’s contribution during the course and that they are confident the learner has understood the content of the course.

Quality assurance

Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard. 

CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the Training Standard. 

Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk-based analysis. They will also be visited annually by the CITB quality assurance team.

Renewal/refresher

There are no mandatory renewal or recommended refreshment requirements for this standard.

Approval date

November 2018

Review cycle

Either on request or in 3 year(s) from approval date.

Learning outcomes

The candidate will be able to:

  • Interpret relevant standards associated with timber frame construction
  • Identify requirements associated with managing a timber frame construction site
  • Identify common defects associated with timber frame construction.
Share