Hang wallcoverings to complex surfaces


Overview
This training standard is for people working in the occupational area of Decorative Finishing. After completion each delegate should have the competence to hang wallcoverings to complex surfaces.

CITB has developed this standard in discussion with industry. 

Duration

Minimum 2 days of 6 learning hours per day

Purpose / Scope

This training standard is for people working in the occupational area of Decorative Finishing. After completion each delegate should have the competence to hang wallcoverings to complex surfaces.

 The scope covers:

  • interpreting information  
  • adopting safe and healthy working practices
  • selecting and preparing materials and associated equipment
  • providing protection to the work area
  • hanging any wall covering type to complex and demanding architectural features that require careful handling and trimming

Occupational relevance

Training delivered against this standard would be relevant to the following occupational groups:

  • Operative and craft
  • Supervision

Candidate pre-requisites

There are no candidate pre-requisites as part of this standard. However, a basic knowledge of hanging wallcoverings terminology and techniqueswould be beneficial.

Instruction / Supervision

As a minimum, course instructors must be able to demonstrate that in relation to this standard they have:

  • A train the trainer or instructional techniques course certificate 
  • Successfully completed training to this standard 
  • At least 2 years relevant industrial experience

Delivery

Delivery may be in an on or off the job environment.

All materials and equipment should be of suitable quality and quantity for candidates to achieve learning outcomes and must comply with relevant legislation.

The class size and candidate/instructor ratio must allow training to be delivered in a safe manner and enable candidates to achieve the learning outcomes.

The following delivery methods may/may not be used in the delivery of this standard:

  • workshop

This standard is considered to contain 51 per cent or more practical learning.

Assessment

For the successful completion of training, the trainer must be satisfied that the candidate has achieved all of the learning outcomes.

Quality assurance

 Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk-based analysis. They will also be visited annually by the CITB quality assurance team.

Renewal / refresher

Non mandatory refresher every 5 years

Approval date

TBC

Review cycle

Either on request or in 3 year(s) from approval date.

Learning outcomes

The candidate will be able to:

  • Adopt safe and healthy work practices, procedures and skills relating to the method/area of work
  • Use methods of calculating quantity, length, area and wastage associate with the method/procedure to hang wallcoverings to complex surfaces
  • Establish start and finishing points
  • Check suitability of surfaces to receive wallpaper
  • Preparation of pastes and adhesives
  • Prepare and hang matching patterned paper to any 3 of the following surfaces, ceilings, sloping ceilings; free-standing columns/pillars; stairwells; walls with both internal and external angles; ceilings of above average span; alcoves/niches and arches
  • Prepare and hang foundation papers, textured/relief and patterned finishing papers
  • Work around electrical fittings and pipework
  • Safe use of access equipment, hand tools and associated equipment




Additional information about this standard

Contact trade organisations for more information:

This standard is covered by National Occupational Standard COSVR336