Production and use of multi-plate stencils

This standard is about producing multi-plate stencils from complex designs to include setting out and application.

CITB has developed this standard in discussion with industry. 


Minimum 2 days of 6 learning hours per day

Purpose / Scope

This standard is about producing multi-plate stencils from complex designs to include setting out and application.


  • develop skills to protect, match, scale, draw, cut out, set out, mix, pour, dilute, position, secure, apply, maintain and transfer
  •  form, manufacture and set out complex involved, elaborate or intricate single-plate and multi-plate stencils
  • position and produce stencil designs

Occupational relevance

Training delivered against this standard would be relevant to the following occupational groups:

  • pperative and craft
  • supervision

Candidate pre-requisites

There are no candidate pre-requisites as part of this standard. However, a basic knowledge of painting and decorating would be beneficial.

Instruction / Supervision

As a minimum, course instructors must be able to demonstrate that in relation to this standard they have:

  • A train the trainer or instructional techniques course certificate 
  • Successfully completed training to this standard 
  • At least 2 years relevant industrial experience


Delivery may be in an on or off the job environment.

All materials and equipment should be of suitable quality and quantity for candidates to achieve learning outcomes and must comply with relevant legislation.

The class size and candidate/instructor ratio must allow training to be delivered in a safe manner and enable candidates to achieve the learning outcomes.

The following delivery methods may/may not be used in the delivery of this standard:

  • workshop

This standard is considered to contain 51 per cent or more practical learning.


For the successful completion of training, the trainer must be satisfied that the candidate has achieved all of the learning outcomes.

Quality assurance

 Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk-based analysis. They will also be visited annually by the CITB quality assurance team.

Renewal / refresher

Non mandatory refresher every 5 years

Approval date


Review cycle

Either on request or in 3 year(s) from approval date.

Learning outcomes

The candidate will be able to:

  • adopt safe and healthy work practices, procedures and skills relating to the method/area of work
  • check suitability of previously prepared surface
  • prepare brushes, rollers, specialised tools and equipment
  • form, manufacture and set out and multi-plate stencils, including ties
  • produce graduated effects by brush, sponge and spray
  • maintain the integrity of the stencil plate (cleanliness and structure)

Additional information about this standard

Contact trade organisations for more information:

This standard is covered by National Occupational Standard COSVR336