Roofing (common)

< Back to search results

Installation of roof lights to all roofs

We have doubled the grant rates for short course tiers 1 – 3. To address rising costs, you can now receive higher rates on course achievements from 1^st April 2023

Grant Tier

Achievement date before 1 April 2023

Achievement date on or after 1 April 2023

Grant Tier 1

Grant Tier 1 Refresher

£30

£15

£60

£30

Grant Tier 2

Grant Tier 2 Refresher

£70

£35

£140

£70

Grant Tier 3

Grant Tier 3 Refresher

£120

£60

£240

£120

Last updated: 1 September 2018
Grant rate/tier: £140 (Tier 2)
Grant code: GET0273

Overview

The purpose of this standard is to provide the candidate with knowledge and skills to install a rooflight (also known as skylight) to a roof.

Find a course for this standard

CITB have developed this training standard in discussion with industry

Duration

Minimum 2 days of 6 learning hours per day.

Purpose/scope

The purpose of this standard is to provide the candidate with knowledge and skills to install a rooflight (also known as skylight) to a roof.

The scope of this standard covers:

Roofing systems that are sloping or flat, and of any material
Rooflights (aka skylights) of any design and material
Types of: rooflight, flashing, and fixing
Main parts of rooflights
Performance factors of rooflights
Types of roof structure
How to read manufacturers’ installation drawings
Types of tools and equipment for installing rooflights
How to prepare, handle, and hoist a rooflight
How to set out a rooflight installation
How to cut, prepare, and reinforce the rooflight opening
How to install a rooflight from inside/outside
How to weatherproof a rooflight
Main legislation, codes of practice, and/or standards that apply to rooflights, including safety.

Occupational relevance

Training delivered against this standard is relevant to the following occupational group(s):

Operative and Craft
Technical
Supervision.

Candidate pre-requisites

For this training, candidates must hold a valid Working at Height certificate. It would be beneficial if candidates had a basic knowledge of roof terminology, tools, and techniques; and also, the ability to read manufacturer’s installation drawings.

Before candidates perform the work on a construction site, candidates must have successfully completed roofing-specific training for working safely at height.

Instruction/supervision

As a minimum, course instructors must be able to demonstrate that, in relation to this standard, they have:

A train the trainer or instructional techniques course certificate
Successfully completed training to this standard
At least 2 years relevant industrial experience
A verifiable CV.

Delivery

The following methods may be used in the delivery of this standard:

Practical training in an off the job simulated environment, using low height roofing rigs
Theory training may be: classroom, e-learning, or a combination

All materials and equipment must be of a suitable quality and quantity for candidates to achieve learning outcomes and must comply with relevant legislation.

The class size and candidate/instructor ratio must allow training to be delivered in a safe manner and enable candidates to achieve the learning outcomes.

Learning should include at least 60% of learning activities for candidates to install rooflights to suit roofing scenarios.

Assessment

For the successful completion of training, the trainer will be required to make a declaration of the learner’s contribution during the course and that they are confident the learner has understood the content of the course.

Quality assurance

Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.

CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the training standard.

Approved training organisations will be required to present information on records of training and assessment upon request to CITB for desk based analysis. They will also be visited annually by the CITB quality assurance team.

Renewal

Recommended refreshment: HSE, other relevant codes of practice or industry card scheme criteria recommend that the candidate completes a refresher of his/her training (that is to ensure their knowledge and/or skills are up to date) every 5 years.

Approval date

17th November 2017

Review cycle

Either on request or in 3 years from approval date.

Learning outcomes

The candidate will be able to:

List types of rooflight, flashing, and fixing
List main parts of rooflights
List performance factors for rooflights
List types of roof structure
Read manufacturers’ installation drawings
List the tools and equipment to install a rooflight
Prepare, handle, and hoist a rooflight (large sizes/weights may require a certified rigger.
Set out a rooflight installation (using a sample scenario manufacturers’ installation drawing)
Cut, prepare, and reinforce the rooflight opening (using a sample scenario manufacturers’ installation drawing)
Install a rooflight from inside/outside (using a sample scenario manufacturers’ installation drawing)
Weatherproof a rooflight(using a sample scenario manufacturers’ installation drawing)
List the main legislation, codes of practice, and/or standards that apply to rooflights, including safety