The candidate will be able to | Additional guidance to support learning outcome |
Describe the main types of sloping roof, which can include:
- details of main areas, eaves, verges, ridges, hips and valleys.
|
Photos and videos of roof installations:
- from outside and inside the roof space
- before, during, and after construction
|
Interpret instructions and drawings
|
Examples of:
- manufacturer’s instructions
- roofing drawings
- requirements/specifications
- architects drawings
|
Describe membranes and battens including:
- types, sizes, materials, selection, uses, and features
- regular and reinforced membranes
- batten wood preservation
- batten loading and strength
|
Examples of battens and membranes
|
Use tools and equipment (hand and power) for:
- measuring, marking, and installing
- types, uses, cleaning, setting, hazards, maintenance, and storage
|
Examples of tools and equipment
|
Perform basic estimates for quantities of battens and membranes
|
Sample estimates
|
Perform basic calculations for batten spacings including:
- bottom datum, top datum, and gauge
|
Sample calculations
|
Make and use a gauging stick, strike horizontal lines
|
Example gauging stick
|
Describe how to store and handle membranes and battens including:
- on open ground
- in a covered building
- on the roof
|
|
Describe how to lift membranes and battens onto the roof including by:
- hand, winch, conveyor, hoist
|
Videos of methods
|
Plan the work including:
- access, start point, exit, set out, foot traffic, communication, materials, equipment, other trades
|
Access methods to/from the roof depend on availability, roof type, a risk assessment, plus working at height PPE, and may include:
- step ladders, platform ladders, leaning ladders, trestles, elevated work platforms, scissor lifts, cherry pickers, boom lifts, travel towers, guard rails, mobile scaffold, and fixed scaffold
|
Work safely including:
- follow safe work practices/procedures
- identify hazards
- reduce/eliminate risks
- use controls
- use personal protective equipment (PPE)
|
Videos/photos of good and bad practice.
Examples of:
- PPE
- risk assessments
- safe work practices/procedures
- spills and clean up
- environmental legislation
- safety legislation
- SDS sheets for COSSH
|
Roof check including:
- defects, slope angle, spacings, dimensions, squareness and compensation techniques
|
Video in classroom
Practical demonstration in workshop using a roof rig
Candidate practice with coaching using a roof rig
|
Set out the materials on the roof
|
Install breather membrane to:
- valley, eaves, main roof area, soil pipe, ridge, hip, verge, and abutment
- and include membrane: sag, drape, and overlaps
|
Check batten quality (grade) to current BS 5534:
- wane, fissures, knots, resin pockets
|
Measure, cut, and fix battens (stop and counter) using hand and power tools to the roof including:
- hip, verge, abutment, and half-rafter
|
Maintain a clean and tidy workplace
|
Describe what to do if the weather deteriorates including:
- hot, cold, windy, and wet
- before, during, and after the work
|
|
Clean up and dispose of waste materials
|
Environmental considerations for waste materials
|