Wall and floor tiling

< Back to search results

Internal ceramic tiling to sheet and board substrates

We have doubled the grant rates for short course tiers 1 – 3. To address rising costs, you can now receive higher rates on course achievements from 1^st April 2023

Grant Tier

Achievement date before 1 April 2023

Achievement date on or after 1 April 2023

Grant Tier 1

Grant Tier 1 Refresher

£30

£15

£60

£30

Grant Tier 2

Grant Tier 2 Refresher

£70

£35

£140

£70

Grant Tier 3

Grant Tier 3 Refresher

£120

£60

£240

£120

Last updated: 28 November 2018
Grant rate/tier: £140 (Tier 2)
Grant code: GET1765

Overview

The purpose of this standard is to provide the candidate with the knowledge and skills to tile internally onto overlay sheet and board substrates on walls and floors.

Find a course for this standard

CITB has developed this standard in discussion with industry

Duration

Minimum 1 day of 6 learning hours

Purpose / scope

The purpose of this standard is to provide the candidate with the knowledge and skills to tile internally onto overlay sheet and board substrates on walls and floors.

The scope of this standard covers:

definitions and suitability for proprietary substrates
design considerations for proprietary substrates
design considerations for a new build
design considerations for proprietary alternative products
how to fix tiles to existing timber flooring
how to prepare the substrate
how to fix tiling systems to new walls and new floors
how to work safely
related legislation, codes of practice, and standards

Occupational relevance

Training delivered against this standard is relevant to the following occupational group(s):

operative and craft
supervision.

Candidate prerequisites

There are no candidate pre-requisites as part of this standard. However, a basic knowledge of tiling terminology and techniques would be beneficial.

Instruction / supervision

As a minimum, course instructors must be able to demonstrate that, in relation to this standard, they have:

A train the trainer or instructional techniques course certificate
Successfully completed training to this standard
At least 2 years relevant industrial experience
A verifiable CV.

Delivery

The following method(s) may be used in the delivery of this standard:

classroom and workshop
on site in a safe and supervised environment

All materials and equipment must be of a suitable quality and quantity for candidates to achieve learning outcomes and must comply with relevant legislation.

The class size and candidate/instructor ratio must allow training to be delivered in a safe manner and enable candidates to achieve the learning outcomes.

This standard is considered to contain 51 per cent or more practical training.

Assessment

For the successful completion of training, candidates must complete an end of course practical assessment or knowledge test that measures the learning outcomes and has a pass or fail criteria.

Quality assurance

Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.

CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the Training Standard.

Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk-based analysis. They will also be visited annually by the CITB quality assurance team.

Renewal/refresher

There are no mandatory renewal or recommended refreshment requirements for this standard.

Approval date

November 2018

Review cycle

Either on request or in 3 years from approval date.

Learning outcomes

Learning outcomes
The candidate will be able to:		Additional guidance to support learning outcome
Define proprietary substrates and suitability such as: solid wood, plywood, particle board, cement-bonded particle board, medium density fibreboard (MDF), oriented strand board (OSB), other wood-based products. foam-cored tile backing boards, glass-reinforced cement board (GRC), fibre-cement tile backing board, gypsum-based boards, paper faced plasterboards (walls only), and uncoupling membranes		Samples of tiles and materials Product brochures for tiles and materials Manufacturer’s instructions for tiles and materials SDS (safety data sheets) for materials (COSSH) PPE examples for materials and hand/power tools Video examples of installation process and techniques Videos of good and bad practice Scenarios with photos to practice selection of: tiles, grouts, joints, and adhesives Photos of good and bad installations Prints/PDFs (full/extract) of standards, codes, and guides
Describe the design considerations for proprietary substrates
Describe the design considerations for a new build such as: walls, wood-based products, floors, wood-based products, rigid construction, proprietary products, and floating wood floors
Describe the design considerations for proprietary alternative products such as: foam cored tile backing boards, fibre-reinforced cement board, and uncoupling membranes
Fix tiles to existing timber flooring such as: wood block floor (parquet and wood mosaic), composition block flooring, and magnesite (magnesium oxychloride) flooring
Prepare the substrate prior to tiling
Fix tiling systems to new walls including: general considerations, wood-based sheets and boards, proprietary sheets and boards
Fix tiling systems to new floors including: wood-based sheets and boards, proprietary sheets and boards
Work safely including: follow safe work practices identify hazards reduce/eliminate risks use controls use PPE	Examples of: PPE SDS sheets for COSSH risk assessments safe work practices/procedures
Comply with related legislation, codes of practice, and standards	Safety legislation (H&SAWA, COSSH, PUWER, LOLER, Work at Height), HSE guidance, manufacturer’s documents, British/EN/ISO Standards, codes of practice, association guidance, building regulations, SDS sheets, company procedures, risk assessments, safe work procedures, environmental protection, and use of PPE.

Additional information about this standard

Other organisations have relevant information for this standard

Health & Safety Executive (HSE) guides

Legislation

View relevant government legislation

Health and Safety at Work etc Act 1974
Workplace (health, safety & welfare) regulations 1992
The Work at Height Regulations 2005
Work at Height (Amended) 2007
Personal Protection Equipment Regulations 2002 (PPE)
Personal Protection Equipment at Work Regulations 1992 (PPE)
Provision and Use of Work Equipment Regulations (1998 UK 1999 NI) PUWER
Control of Substances Hazardous to Health Regulations 2002 (COSHH)
Lifting Operations and Lifting Equipment Regulations 1998 (LOLER)
Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 1995 (RIDDOR)
CDM Construction Design and Management Regulations 2015 CDM
Construction (Health, Safety and Welfare) Regulations 1996
Manual Handling Operations Regulations 1992 as amended 2002
Control of Noise at Work Regulations 2005
Control of Vibration at Work Regulations 2005

Building regulations

Building and Buildings, England and Wales: The Building Regulations 2010.
The Building (Scotland) Regulations 2004
Statutory Rules of Northern Ireland

Approved documents (guidance for building regulations)

Resistance to the passage of sound: Approved Document E
Access to and use of buildings: Approved Document M

Building information modelling (BIM)

A multi-volume subscription library of clauses covering building construction.

Work at Height Safety Association

The WAHSA Technical Guidance Notes are a free resource, provided and maintained by WAHSA and its members. A reference for: specifiers, managers, and end users of fall protection equipment.

BS-EN-ISO standards

Miscellaneous

BS EN 131- 1 to 7: Ladders. Terms, types, sizes, requirements, testing, marking, user instructions
BS 8000-0: 2014. Workmanship on construction sites. Introduction and general principles. Note that this standard partially replaces/supersedes BS 8000-1 to 16.
BS 6093: 2006+A1:2013. Design of joints and jointing in building construction. Guide.

Substrates and screeds

BS EN 636-3: 2003 Plywood. Specifications
BS 4483: 2005. Steel fabric for the reinforcement of concrete. Specification.
BS 8204-1 to 7 Screeds, bases and in situ floorings: Codes of practice. Concrete, cementitious levelling, polymer, terrazzo, mastic asphalt, synthetic resin, pumpable self-smoothing screeds

Wall and floor tiling, design & installation, code of practice

BS 5385-1: 2018 Ceramic, natural stone and mosaic wall tiling in normal internal conditions
BS 5385-2: 2015 External ceramic, natural stone and mosaic wall tiling in normal conditions
BS 5385-3: 2014 Internal and external ceramic and mosaic floor tiling in normal conditions
BS 5385-4: 2015 Ceramic and mosaic tiling in specific conditions
BS 5385-5: 2009 Terrazzo, natural stone and agglomerated stone tile and slab flooring

Ceramic tile specifications

BS EN ISO 10545- 1 to 16: Specifications for ceramic tiles including: dimensions, surface quality, water absorption, porosity, relative density, bulk density, modulus of rupture and breaking strength, impact resistance by measurement of coefficient of restitution, resistance to deep abrasion for unglazed tiles, resistance to surface abrasion for glazed tiles, linear thermal expansion, resistance to thermal shock, moisture expansion, crazing resistance for glazed tiles, frost resistance, chemical resistance, resistance to stains, lead and cadmium given off by glazed tiles, colour differences.
BS EN 14411: 2016 Definition, class’n, characteristics, assess, verify, performance, marking
BS EN 14891: 2017 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, tests, assess, verify, performance, class, and marking

Stone products

BS EN 12057: 2015 Natural stone products. Modular tiles. Requirements
BS EN 14157: 2017 Natural stone test methods. Determination of the abrasion resistance
BS EN 14618: 2009 Agglomerated stone. Terminology and classification
BS EN 15285: 2008. Agglomerated stone. Modular tiles for floor and stairs (internal and external).
BS EN 14617- 1 to 16 Agglomerated stone. Test methods: flexural strength (bending), apparent density and water absorption, electrical resistivity, chemical resistance, thermal shock resistance, freeze and thaw resistance, dimensional stability, abrasion resistance, resistance to fixing (dowel hole), linear thermal expansion coefficient, compressive strength, dimensions, geometry, surface quality, and impact resistance

Terrazzo tiles

BS EN 13748- 1 & 2: 2004 Terrazzo tiles for internal use, and external use

Grouts and adhesives

BS ISO 14448: 2016 Low modulus adhesives for exterior tile finishing.
BS EN 12004- 1 & 2: 2017 Adhesives for ceramic tiles. Requirements, assessment, verification, performance, classification, marking, and testing
BS EN 12808- 1 to 5: Grouts for tiles. Determination of: chemical resistance of reaction resin mortars, resistance to abrasion, flexural and compressive strength, shrinkage, and water absorption
BS ISO 13007- 1 to 5: Ceramic tiles. Grouts and adhesives. Terms, definitions, specifications for adhesives. Test methods for adhesives. Terms, definitions and specifications for grouts. Test methods for grouts. Requirements, tests, conformity, classification and designation of liquid-applied waterproofing membranes for use beneath adhesive-bonded ceramic tiling
BS EN 13888: 2009 Grout for tiles. Requirements, evaluation of conformity, class and designation