You must be able to:
Demonstrate work skills to:
match
mix
pour
dilute
load
lay-on
lay-off
cut in
Apply water-borne or solvent-borne coatings to internal or external surfaces for domestic, commercial or industrial situations, to working instructions for trim, broad areas and structural and architectural work by brush and roller
Use hand and maintain hand and power tools and associated equipment
You must know and understand:
Why, where and how the resources should be used and how any problems associated with the resources are reported in relation to:
water-borne and solvent-borne coatings
primers, sealers, intermediate coatings (undercoats) and finishes (single and two-pack coatings)
single-product systems including but not limited to emulsions, varnishes, timber preservative treatments.
specialist coatings
solvents and/or thinners
appropriate brushes, rollers and other associated equipment
temporary surface protection and masking materials
plant and access equipment
hand and power tools and associated equipment
digital equipment including but not limited to laser levels
How to establish site access requirements
How to check suitability of previously decorated and prepared surfaces
How to prepare and apply water-borne, solvent-borne and two-pack coatings by brush and roller
How to coat broad areas and structural and architectural features
How to stripe-coat surface features (industrial environment)
How to test wet and dry film thickness
How atmospheric conditions affect coatings and their application process
How to identify the working and pot life of materials prepared for use
How to work around electrical fittings and pipework
How to recognise and determine when specialist coatings, skills or knowledge are required and report accordingly
The relevance of an assessment of historical significance
How to recognise specific requirements for structures of special interest, traditional construction, hard-to-treat buildings and historical significance
How to work with, around and in proximity to plant and machinery
How to work at height using access equipment
How to use all hand and power tools and associated equipment.
How and why operative care and maintenance of all hand and power tools and associated equipment is carried out