You must be able to:
Comply with the contract information to lay sand and cement screed floors efficiently to the required specification by demonstrating work skills to:
measure
mark out
locate
secure
form
fix
prime
mix
convey/transport
lay
spread
level
test
compact
finish
cure
protect
inspect
Using and maintaining relevant hand and power tools, screed pumps and associated equipment
Lay screeds to floors and stairs to working instructions in traditional screed
Report work undertaken to agreed organisational procedures
You must know and understand:
How the resources should be used and how any problems associated with the resources are reported in relation to the following:
battens, reinforcement and drainage accessories
movement and construction joints
bonding agents, sand, cement, additives, aggregates, colouring agents, membranes
hand and power tools and ancillary equipment
testing equipment
digital equipment
How to set out and maintain line and level
how to locate and protect services (water, gas, electric and waste)
How to prepare and protect service penetrations
How to position and secure reinforcement, spacers and fixings
How to form drainage inlets, drainage channels and outlets
How to install perimeter edge strip, movement (expansion), thermal joints anti-crack applicable to bay sizes
How to inspect prepared substrates to include cleanliness, testing and application of primers and damp proof membranes (DPM)
How to identify and use a site datum
How to identify and apply the product minimum and maximum depths
How to mix screeds using paddle/forced action mixer
How to convey/transport screed material using mechanical (pumps, bulk bags by lifting equipment) and by hand (shovelled, barrowed)
How to provide correct environmental conditions for screed during and following installation
How to test screed mix for consistency and design performance
How to prepare samples for testing
How to lay and compact screed (vibrating screed beam and rollers) to floors and around fixings to specified thickness, level and finish
How to work with, around and in close proximity to plant and machinery
How to monitor and control exposure to vibration, dust and noise
How to ensure the area is adequately ventilated
How to protect and cure screed
How to recognise and determine when specific skills and knowledge are required and report accordingly
How to meet agreed quality criteria
The basic principles, functions and limitations of:
resin coatings
flowable screed
How to ensure the area is adequately ventilated during installation
How to ensure the area is adequately ventilated for drying following installation based on the screed type
The limits of own skills and knowledge and the process of appropriate escalation to supervisors and managers
How to identify, select and use PPE/RPE that is specific to task
How to interpret and respond to results obtained in testing processes
Understand the sequence of installation operations
How to protect surfaces
Identify curing times
The importance of temperature control