Search result items
- Published
- Chimney engineering
- Assured
- £30 (Tier 1)
- GET1798
The purpose of this standard is to provide the candidate with knowledge to determine the mechanical and atmospheric basis for installing approved alternative flue liner systems.
- Published
- Chimney engineering
- Assured
- £30 (Tier 1)
- GET1799
The purpose of this standard is to provide the candidate with knowledge to use best practices in relation to: legislation, building regulations, BS EN standards, codes of practice, contracts, HSE guidance, method statements, work scopes, programs of work, and county court protocol. This training standard includes Chimney Legislation, Regulations, British and European Standards.
- Published
- Chimney engineering
- Assured
- £30 (Tier 1)
- GET1347
This training standard is in development and will be published shortly
- Published
- Chimney engineering
- Assured
- £30 (Tier 1)
- GET1801
The purpose of this standard is to provide the candidate with knowledge of the design, operation, and erection of chimneys and flues.
- Published
- Chimney engineering
- Assured
- £30 (Tier 1)
- GET1803
The purpose of this standard is to provide the candidate with knowledge to install a flue lining in a chimney.
- Published
- Chimney engineering
- Assured
- £30 (Tier 1)
- GET1802
The purpose of this standard is to provide the candidate with knowledge of design and installation requirements for terminals and cowls.
- Published
- Chimney engineering
- Assured
- £30 (Tier 1)
- GET1804
The purpose of this standard is to provide the candidate with knowledge to recognise defects and faults in chimneys and flues, and skills to use diagnostic equipment.
- Published
- Chimney engineering
- Assured
- £30 (Tier 1)
- GET1805
The purpose of this standard is to provide the candidate with knowledge to inspect, fault-find and pressure test to determine if a chimney is a smoke nuisance.
- Published
- Chimney engineering
- Assured
- £30 (Tier 1)
- GET1806
The purpose of this standard is to provide the candidate with knowledge to determine defective appliances and chimney systems, and their emissions.
- Published
- Chimney engineering
- Assured
- £30 (Tier 1)
- GET1807
The purpose of this standard is to provide the candidate with knowledge to determine the mechanical and atmospheric basis for installing a flexible flue liner system.
- Published
- Chimney engineering
- Assured
- £30 (Tier 1)
- GET1808
The purpose of this standard is to provide the candidate with knowledge to identify defective and non–approved open-closed combustion appliances.
- Published
- Chimney engineering
- Assured
- £30 (Tier 1)
- GET1810
The purpose of this standard is to provide the candidate with the knowledge to perform a pre-purchase inspection of flues and chimneys.
- Published
- Chimney engineering
- Assured
- £70 (Tier 2)
- GET1811
The purpose of this standard is to provide the candidate with knowledge and skills to repair and reinstate chimneys and flues for heritage buildings.
- Published
- Chimney engineering
- Assured
- £70 (Tier 2)
- GET1815
The purpose of this standard is to provide the candidate with knowledge and skills to assess chimneys for safety and compliance on thatched structures, and to repair and maintain them.
- Published
- Chimney engineering
- Assured
- £70 (Tier 2)
- GET1812
The purpose of this standard is to provide the candidate with knowledge of how to repair and reinstate chimneys and flues for heritage buildings.
- Published
- Chimney engineering
- Assured
- £30 (Tier 1)
- GET1813
The purpose of this standard is to provide the candidate with knowledge to determine the mechanical and atmospheric basis for installing a rigid chimney system.
- Published
- Chimney engineering
- Assured
- £30 (Tier 1)
- GET1814
The purpose of this standard is to provide the candidate with knowledge of roofing liability when working on and to chimney structures.
- Published
- Chimney engineering
- Assured
- £30 (Tier 1)
- GET1816
The purpose of this standard is to provide the candidate with the knowledge relating to the design and build of a new chimney and flue.
- Published
- Chimney engineering
- Assured
- £30 (Tier 1)
- GET1817
The purpose of this standard is to provide the candidate with knowledge to refurbish and reinstate an existing masonry chimney. This training standard includes Chimney structure and flue lining (cast in situ concrete lining system).
- Published
- Chimney engineering
- Assured
- £30 (Tier 1)
- GET1902
The purpose of this standard is to provide the candidate with knowledge of ventilation systems.