Search results

This standard aims to provide employees working within the Highway Electrical Sector the underpinning knowledge required for the understanding and use of equipment for Safety at Street Works and Road Works, as appropriate to the scope of their work on site.

---

The purpose of this standard is to provide the delegate with the knowledge to support the following: hazards, risk assessment and safe systems of work, installation of metal ceiling components and acoustic plasterboards/ceiling tiles to maintain designed acoustic, working to construction and manufacturers drawings, construction principles. related products (e.g., metal ceiling tiles, plasterboard ceiling tiles, mineral/glass fibre ceiling tiles, fixings, sealants, components, etc.) required tools and equipment

---

The purpose of this standard is to provide the delegate with the knowledge to support the following: hazards, risk assessment and safe systems of work, installation of MF ceiling systems and acoustic plasterboards to maintain designed acoustic, performance. working to construction and manufacturers drawings, construction principles. related products (e.g., plasterboards, fixings, sealants, components, etc.) required tools and equipment

---

The purpose of this standard is to provide the learner with the knowledge and skills to support the following scope: demonstration of work skills to prepare, load, protect, communicate, measure, assemble, position, secure and clean. use and maintain hand and power tools, airless spray equipment and associated equipment. set up and adjust spray equipment to achieve the finish stated in the given working instructions, relating to the following: preparation of coatings, loading the system, monitor and maintain supply, apply water-borne or solvent-borne coatings by airless spray.

---

The purpose of this standard is to provide the learner with the knowledge and skills to support the following scope: demonstration of work skills to prepare, load, protect, communicate, measure, assemble, position, secure and clean, use and maintain hand and power tools, airless spray equipment and associated equipment, set up and adjust spray equipment to achieve the finish stated in the given working instructions, relating to the following: preparation of coatings, loading the system, monitor and maintain supply, apply water-borne or solvent-borne coatings by airless spray.

---

The purpose of this standard is to provide the learner with the knowledge and skills to support the following scope: demonstration of work skills to prepare, load, protect, measure, assemble, position, secure and clean, use and maintain hand tools, power tools, air spray equipment and associated equipment, set up and adjust spray equipment (high-volume low-pressure [HVLP] systems) to achieve the finish stated in the given working instructions, relating to: preparation of coatings, loading the system, monitoring and maintaining supply, apply water-borne or solvent-borne coatings by high-volume low-pressure [HVLP] air spray systems

---

The purpose of this standard is to provide the learner with the knowledge and skills to support the following scope: demonstration of work skills to prepare, load, protect, measure, assemble, position, secure and clean, use and maintain hand tools, power tools, air spray equipment and associated equipment, set up and adjust spray equipment (high-volume low-pressure [HVLP] systems) to achieve the finish stated in the given working instructions, relating to: preparation of coatings, loading the system, monitoring and maintaining supply, apply water-borne or solvent-borne coatings by high-volume low-pressure [HVLP] air spray systems.

---

The purpose of this standard is to provide the delegate with the knowledge to further support their learning with the following: carrying out pre and post installation checks; types of surface finishes; hazards with resources; protecting work and work area from damage; minimising thermal bridging; installing vapour control barriers; recognising specific requirements for structures of special interest, traditional construction and historical significance; recognising when specialist skills are required; how to communicate with your team and others; looking after tools and equipment; working at height and safe use of access equipment and harness systems.

---

The purpose of this standard is to provide the candidate with the knowledge and skills to operate chemical cleaning equipment used for façade preservation.

---

The purpose of this standard is to provide the skills needed to be a safe and efficient vacuum lifter. It should cover an introduction to the machine and controls, correct lifting procedures and the operator's safety code.

---