Search results

The project will produce a research paper on Human Factors Practice (HFP) for specific use within the UK Construction & Built Environment (CBE) sector. HFP is closely linked to leadership and management skills. The paper will conclude with recommendations.

The project will reduce learning hours and increase retention of students by developing a high-quality virtual 4-bedroom house and building site from which a range of learning can be undertaken.

Behavioural safety training modules will be developed at each stage of construction, for example: plant and equipment hazards in initial stages; Working at Height in the final stages; and electrical and fire hazards in a completed build.

Modules will map to the OCN Level 1 Health and Safety course and will be multi-purpose across disciplines. Intervention will be a blended learning solution - learned in the real world and rehearsed in the virtual world. 

In addition, the project will also support blended learning including VR for Construction Managers and Supervisors.

The project will also expand the capacity and capability of immersive learning by promoting VR in construction at careers events, as well as deliver a programme of upskilling college staff and local employers in how to adopt & embed IL.

At the end of the project, the benefits of using immersive learning for behavioural safety and hazard awareness will be played back to industry, and VR content and teaching modules will be made available to industry. Learners will have received learning in a more impactful way than traditional methods, potentially leading to better performance on site.

The project will deliver the capacity and capability to upskill industry on standardised skills and knowledge in offsite construction.

Training will be a combination of  trainer-led and application of online resources. Content will be modular and accredited, purposed for a wide range of uses and mapped to relevant L2-7 qualifications and standards. Guidance will be developed to help trainers contextualise modules to their particular subject area.

The project will enhance materials with experiential learning that includes classroom enrichment, immersive and real-world experiences, as well as a sustainable network of experts to share knowledge, maintain and support the products.

After the project, a significant proportion of the construction FE sector will be upskilled in offsite practices. Sustainability will be achieved by hosting on a free online platform in a format compatible with other platforms, thus allowing resources to be freely downloaded and shared. Trainers will be certified once upskilled to deliver the content.

The project will deliver a real-world GB-wide infrastructure that will deliver immersive learning to the industry in a sustainable and scalable way. This will be completed through six focused delivery Hubs across three nations, located at:

1. Leeds College of Building
2. Construction Wales Innovation Centre
3. Construction Scotland Innovation Centre
4. Dudley College
5. Waltham Forest Construction Innovation Centre
6. Bridgewater & Taunton College

Through these Hubs, the project will deliver four Strands of interventions to 2,440 learners which will reduce error, accident rates and time/cost factors in delivering training. Virtual Reality (VR) and Augmented Reality (AR) modules will be developed across the following work streams delivered in each Hub:

1. Working at height/scaffolding using VR
2. Building de-construction using BIM and VR
3. Wood/paint-spraying machines with AR
4. Surveying using drones in a VR space.

This will be supported by a 'train-the-trainer' programme to deliver immersive learning in the industry, as well as the development of a bespoke learner management system.

At the end of the project, the six hubs will act as centres of excellence where industry can walk in with a training need, be upskilled on how to use immersive technologies, develop immersive learning solutions and access immersive training through the hardware and content funded by CITB.

This project will create 3 x fully interactive learning tools to address errors and defects in the following key areas; 

• Timber staircase installation
• Timber fire door assembly and door set installation
• Timber window installation.

The project will pilot the learning with BWF members and then be made widely available across industry.

The project will support colleges delivering the Apprenticeship requirement for 20% off-site learning for Form Working, Steel Fixing and Concrete Pouring focusing on the nuclear sector.  It will use augmented reality (AR) to enhance the acquisition of skills and competencies that are then reinforced on site using a collaborative virtual reality (VR) classroom that each apprentice can access remotely.

This will minimise time off-site through a virtual learning environment, increase engagement through technology native to the target group, and enhance knowledge retention and achievement.

Apprentices will use state of the art immersive learning headwear in college to enhance real-world learning.  They will then be given a low-cost mobile VR headset that they will take to site that will be worn off-site at scheduled times to refresh skills in a collaborative virtual environment shared with other apprentices and the college lecturer.

After the project, Bridgwater & Taunton College will have shown how immersive learning can be used to improve the acquisition and retention of knowledge. They will have stablished a way to deliver collaborative learning through this technology and will have developed materials for others to take the same approach.

The project will develop targeted, innovative, quality-assured training that delivers standardised skills and knowledge for off-site manufacturing and assembly in construction.  It will use a range of blended learning solutions that draw from and build upon existing content.

Resources will be made freely available on the Supply Chain Sustainability School (SCSS) platform along with the skills diagnostic tool and trainer upskilling resources, underpinned by SCSS learner management systems. 

After the project MTC will achieve scalability of the developed materials through the networks within partners National Open College Network (NOCN) and Supply Chain School  NOCN will disseminate through its network of 600 providers, quality assure the materials and commit to maintaining them for at least two years after the project. Industry training materials on offsite will be freely available through the Supply Chain School website.

The programme will create a publically shared rubric built on VINCI best practices for the industry to use to upskill their job families in BIM. This is in response to the ambitious 2025 Construction Strategy which aims to achieve 33% reductions in costs and a 50% increase in efficiency through full BIM integration.

After the project, 14 short-duration e-learning modules will be freely available to use by industry. BIM ambassadors will be upskilled to champion the use of BIM in construction roles and promote the modules. A BIM framework will be developed that will go on to inform CITB activity in identifying and standardising digital competencies.

The project seeks to address the common problems of duplication, waste, errors and inefficiencies that impact upon an organisation’s productivity and profitability. 

An industry-specific app will be developed and made available to the sector to integrate back office functions with external sites. This will include all job functions from enquiry, and planning, to job completion.

After the project the BPL workforce will have the skills to implement productivity efficiencies using the developed app, which will be hosted on app stores to download.

9 Workshops and 42 subsequent 1-2-1 learning interventions focussing on digital skills in the sector.