Search results

The project will deliver a real-world GB-wide infrastructure that will deliver immersive learning to the industry in a sustainable and scalable way. This will be completed through six focused delivery Hubs across three nations, located at:

1. Leeds College of Building
2. Construction Wales Innovation Centre
3. Construction Scotland Innovation Centre
4. Dudley College
5. Waltham Forest Construction Innovation Centre
6. Bridgewater & Taunton College

Through these Hubs, the project will deliver four Strands of interventions to 2,440 learners which will reduce error, accident rates and time/cost factors in delivering training. Virtual Reality (VR) and Augmented Reality (AR) modules will be developed across the following work streams delivered in each Hub:

1. Working at height/scaffolding using VR
2. Building de-construction using BIM and VR
3. Wood/paint-spraying machines with AR
4. Surveying using drones in a VR space.

This will be supported by a 'train-the-trainer' programme to deliver immersive learning in the industry, as well as the development of a bespoke learner management system.

At the end of the project, the six hubs will act as centres of excellence where industry can walk in with a training need, be upskilled on how to use immersive technologies, develop immersive learning solutions and access immersive training through the hardware and content funded by CITB.

This project will create 3 x fully interactive learning tools to address errors and defects in the following key areas; 

• Timber staircase installation
• Timber fire door assembly and door set installation
• Timber window installation.

The project will pilot the learning with BWF members and then be made widely available across industry.

The project will support colleges delivering the Apprenticeship requirement for 20% off-site learning for Form Working, Steel Fixing and Concrete Pouring focusing on the nuclear sector.  It will use augmented reality (AR) to enhance the acquisition of skills and competencies that are then reinforced on site using a collaborative virtual reality (VR) classroom that each apprentice can access remotely.

This will minimise time off-site through a virtual learning environment, increase engagement through technology native to the target group, and enhance knowledge retention and achievement.

Apprentices will use state of the art immersive learning headwear in college to enhance real-world learning.  They will then be given a low-cost mobile VR headset that they will take to site that will be worn off-site at scheduled times to refresh skills in a collaborative virtual environment shared with other apprentices and the college lecturer.

After the project, Bridgwater & Taunton College will have shown how immersive learning can be used to improve the acquisition and retention of knowledge. They will have stablished a way to deliver collaborative learning through this technology and will have developed materials for others to take the same approach.

The project will develop targeted, innovative, quality-assured training that delivers standardised skills and knowledge for off-site manufacturing and assembly in construction.  It will use a range of blended learning solutions that draw from and build upon existing content.

Resources will be made freely available on the Supply Chain Sustainability School (SCSS) platform along with the skills diagnostic tool and trainer upskilling resources, underpinned by SCSS learner management systems. 

After the project MTC will achieve scalability of the developed materials through the networks within partners National Open College Network (NOCN) and Supply Chain School  NOCN will disseminate through its network of 600 providers, quality assure the materials and commit to maintaining them for at least two years after the project. Industry training materials on offsite will be freely available through the Supply Chain School website.

This project is the development of a training and accreditation scheme for ecological clerks of works on construction sites (Site Ecologists). Clients, contractors and the ecology profession will work collaboratively to agree the required competencies and set standards. A comprehensive training and assessment programme leading to accredited status will enable a sustainable supply of confident and well-trained ecological clerks of works able to meet the increasing supply needs of the construction industry.

This project is focussed on mentoring in order to support the retention of new entrants.

The project will:

• Provide 100 new entrants with a mentor
• Train 100 Level 3 apprentices as mentors
• Train 100 industry representatives as mentors
• Produce two best practice guidebooks - one for mentors and one for mentees
• Produce a video case study.

The project will bring together a cross industry partnership to create and direct a unified National Workforce Development programme. It will establish and promote industry wide standards for all roofing disciplines through an "Accredited Roofer" programme that will act as a skills baseline for the sector and that will professionalise the industry.

Developed in partnership with key contractors, who are all SMEs, the Breakfast Club will deliver eight bespoke interactive training and personal development sessions for 48 new industry entrants (4 cohorts of 12) over a 15-month period. 

Running concurrently as a controlled programme alongside the regular intake of new employees, the project will deliver evidence-based comparisons as to the benefit of the bespoke additional interventions for the retention of new entrants.