Defect prevention - roofs

Title

Defect prevention - roofs

Duration

1 day of 6 learning hours

If e-learning only, the duration is to be at least 50% of this.

Purpose/scope

The purpose of this standard is to provide the delegate with the knowledge to support the following:

Scope:

• a minimum of two subjects from the following list with a maximum of six for a one-day course.
• subjects that may be included:
  • pitched
  • flat roofs
  • balconies
  • roof construction - other green, brown, blue
  • low & zero carbon technologies
• for each subject the following should be included include:
  • inspection process
  • common defects relating to the subject
  • recommendations to prevent defect

Occupational relevance

Training delivered against this standard would be relevant to the following occupational group(s):

• operative and craft
• supervision
• management and leadership

Delegates pre-requisites

There are no delegate pre-requisites as part of this standard, however a basic knowledge of roof terminology and techniques would be beneficial.

Instruction/supervision

As a minimum, course trainers must be able to demonstrate that, in relation to this standard, they have:

• an award in education and training (or equivalent, as per requirements for approved training organisations)
• successfully completed training to this standard
• at least 2 years relevant industrial experience
• a verifiable CV

Delivery

Delivery may be in an on or off the job environment.

All materials and equipment must be of a suitable quality and quantity for delegates to achieve learning outcomes and must comply with relevant legislation.

The class size and delegate/trainer ratio must allow training to be delivered in a safe manner and enable delegates to achieve the learning outcomes.

The following delivery methods may be used in the delivery of this standard:

• classroom
• e-learning
• a blend of classroom and e-learning
• a blend of classroom and remote

This standard is considered to contain 51% or more theoretical learning.

This standard is considered to be set at a basic level.

Assessment

Methods of assessment considered appropriate for training delivered against this standard are:

For the successful completion of training, delegates must complete an end of course practical assessment or knowledge test that measures all learning outcomes and has a pass or fail criteria.

Where this training is assessed using multiple-choice questions, a minimum of 10 questions must be asked and delegates are required to achieve an overall pass mark of at least 75%.

Quality assurance

Assured

Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.

CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the training standard.

Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk-based analysis. They will also be visited annually by the CITB quality assurance team.

Renewal

Renewal every 3 years

Classification

Mandatory Renewal

Buffer/grace period

3 months

Approval date

09/11/2021

Review cycle

On request or 3 years from approval date.

Learning outcomes to be refreshed

The delegate will be able to:

• describe the inspection process
  • NHBC Chapter 7.2
  • NHBC Technical Standards | NHBC
  • LASBC warranty inspection checklist
  • Warranty Inspection Checklists (labcwarranty.co.uk)
• identify common faults in specified areas
• recommend ways of preventing identified faults
  • NHBC Standards Chapter 7.2
  • NHBC Technical Standards | NHBC
  • LABC Warranty inspection substructure checklist
  • Warranty Inspection Checklists (labcwarranty.co.uk)

Related standards

• Defect survey and repair