Internal fixing of cavity drainage membranes

Duration

1 day of 6 learning hours

If e-learning only, the duration is to be at least 50% of this.

Purpose/ scope

The purpose of this standard is to provide the delegate with the knowledge and skills to support the following:

Scope:

• recognising when a remedial DPC is unsuitable
• preparing wall surfaces
• isolating electrical circuits on walls
• fixing cavity drainage plaster membranes

Occupational relevance

Training delivered against this standard would be relevant to the following occupational group(s):

• operative and craft

Delegates pre-requisites

There are no delegate pre-requisites as part of this standard.

Instruction/ supervision

As a minimum, course trainers must be able to demonstrate that, in relation to this standard, they have:

• an award in education and training (or equivalent, as per requirements for approved training organisations)
• successfully completed training to this standard
• at least 2 years relevant industrial experience
• a verifiable CV

Delivery

Delivery may be in an on or off the job environment.

All materials and equipment must be of a suitable quality and quantity for delegates to achieve learning outcomes and must comply with relevant legislation.

The class size and delegate/trainer ratio must allow training to be delivered in a safe manner and enable delegates to achieve the learning outcomes.

The following delivery methods may be used in the delivery of this standard:

• classroom
• a blend of classroom and e-learning
• a blend of classroom and remote

This standard is considered to contain 51% or more practical training.

This standard is considered to be set at a basic level.

Assessment

Methods of assessment considered appropriate for training delivered against this standard are:

For the successful completion of training, the trainer must be satisfied that the delegate has achieved all learning outcomes.

Quality assurance

Assured

Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.

CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the training standard.

Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk-based analysis. They will also be visited annually by the CITB quality assurance team.

Renewal

There are no mandatory renewal or recommended refresher requirements for this standard.

Classification

Lifetime (Please note standards using this classification will only be grant aided once per delegate)

Approval date

March 2022

Review cycle

On request or 3 years from approval date.

Learning outcomes

The delegate will be able to:

• describe the circumstances and situations when a remedial DPC is not a viable solution
  
  
• describe how to prepare wall surfaces to include removing:
  • plaster
  • wallpaper
  • skirting boards
  • architraves
    
    
• prepare wall surfaces to be covered by the cavity drainage membrane as stipulated in the specification to include removing:
  • plaster
  • wallpaper
  • skirting boards
  • architraves
    
    
• explain how to safely isolate electrical wall circuits
  
  
• describe how to fix cavity drainage membranes to manufacturers specification to include:
  • in readiness for direct plaster
  • in readiness to receive plasterboard using a dot and dab technique
  • using timber battens
  • metal studding
    
    
• fix cavity drainage membranes to manufacturers specification to include:
  • in readiness for direct plaster
  • in readiness to receive plasterboard using a dot and dab technique
  • using timber battens
  • metal studding