Installing fire protection encasements for steelwork with Gyplyner encasements


Overview
Encasement systems provide 2 purposes, fire protection and aesthetics to create square columns and beams. This standard is designed to develop the practical skills in installing fire protection systems and understanding the process to determine which product meets the fire protection requirements for steelwork between 60 and 180 minutes protection.

Title 

Installing fire protection encasements for steelwork with Gyplyner encasements 

Duration 

Minimum 1 day of 6 learning hours. 

Purpose/ 
scope 

Purpose:  Encasement systems provide 2 purposes, fire protection and aesthetics to create square columns and beams. This standard is designed to develop the practical skills in installing fire protection systems and understanding the process to determine which product meets the fire protection requirements for steelwork between 60 and 180 minutes protection. 

Scope:  

  • use literature to determine fire protection for steelwork 
  • develop a knowledge of L/V in relation to steelwork for columns, beams and joists 
  • cutting methods for Gyplyner encasements 
  • methods for encasing beams 
  • methods for encasing 3 sided columns 
  • methods of fixings with staples , screws 
  • how Gyplyner encasements can be used with metal framed encasement systems. 

Occupational relevance 

Training delivered against this standard would be relevant to the following occupational group(s): 

  • operative and craft 
  • supervision. 

Candidate 
pre-requisites 

There are no candidate pre-requisites as part of this standard. However a basic knowledge of interior systems terminology and techniques would be beneficial. 

Instruction/ supervision 

As a minimum, course instructors must be able to demonstrate that, in relation to this standard, they have: 

  • a train the trainer or instructional techniques course certificate  
  • successfully completed training to this standard  
  • at least 2 years relevant industrial experience 
  • a verifiable CV. 

Delivery 

Delivery may be in an on or off the job environment. 

All materials and equipment must be of a suitable quality and quantity for candidates to achieve learning outcomes and must comply with relevant legislation. 

The following delivery methods may/may not be used in the delivery of this standard: 

  • e-learning 
  • classroom 
  • workshop. 

This standard is considered to contain 51% or more theoretical training. 

This standard is considered to be set at an intermediate level. 

Assessment 

For the successful completion of training, candidates must complete an end of course practical assessment or knowledge test that measures the learning outcomes and has a pass or fail criteria.   

Quality assurance 

Assured 

Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.  

CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the training standard.  

Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk based analysis. They will also be visited annually by the CITB quality assurance team. 

Renewal 

There are no mandatory renewal or recommended refreshment requirements for this standard. 

Approval date 

14/10/19 

Review cycle 

Either on request or in 3 years from approval date. 

Learning outcomes

The candidate will be able to: 

Additional guidance to support learning outcome  

Use a range of multiple layers of Fireline plasterboards for fire protection 

 

Measure steelwork to enable off site cutting for fire protection boards 

 

Demonstrate which screw length is used which Fireline plasterboard thickness. 

 

Demonstrate the use of the formula to calculate the correct screw length to provide a minimum 10 mm penetration into metal. 

 

Fix angle sections to beams and 3 sided columns. 

 

Describe the need to firestop board joints 

 

Outline the limitations for fixing encasement clips to steelwork. 

 

Describe how to extend metal furring sections. 

 

Explain why board joints need to be staggered on external angles. 

 

Measure and cut Fireline plasterboards. 

 

Additional information about this standard 

http://www.british-gypsum.com/literature/white-book is essential reference material.