CITB has developed this standard in discussion with industry
Minimum 1 day of 6 learning hours
Purpose / scope
The purpose of this standard is to provide the candidate with the knowledge of the design principles for single ply roofing.
The scope of this standard covers:
- wind load and actions on building structures and roofs
- falls and drainage layouts, including: crickets, ponding, and freezing
- rainfall intensity and calculation
- thermal: properties, performance, and effects
- resistance to loads and foot traffic
- resistance to fire
- main legislation, codes of practice, standards, and guidance.
Training delivered against this standard is relevant to the following occupational group(s):
- operative and craft
There are no candidate pre-requisites as part of this standard. However, a basic knowledge of single ply roofing terminology and techniques would be beneficial.
Instruction / supervision
As a minimum, course instructors must be able to demonstrate that, in relation to this standard, they have:
- A train the trainer or instructional techniques course certificate
- Successfully completed training to this standard
- At least 2 years relevant industrial experience
- A verifiable CV.
The following methods may be used in the delivery of this standard:
- classroom and / or workshop
All materials and equipment must be of a suitable quality and quantity for candidates to achieve learning outcomes and must comply with relevant legislation.
The class size and candidate/instructor ratio must allow training to be delivered in a safe manner and enable candidates to achieve the learning outcomes.
This standard is considered to contain 51% or more theoretical learning.
For the successful completion of training, candidates must complete an end of course practical assessment or knowledge test that measures the learning outcomes and has a pass or fail criteria.
Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.
CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the Training Standard.
Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk-based analysis. They will also be visited annually by the CITB quality assurance team.
There are no mandatory renewal or recommended refreshment requirements for this standard.
Either on request or in 3 years from approval date.
|The candidate will be able to ||Additional guidance to support learning outcome
Describe wind load and actions on building structures and roofs
BS-EN 1991-1-2 6399: Part 2:1997 Code of practice for wind loads
BS-EN 1991-1-4: 2005 + A1:2010 Eurocode 1. Actions on structures. General actions. Wind actions
BS 6399-2:1997. BS6399-2: 1997 Loading for buildings. Part 2: Code of practice for wind loads
HB 10139:1997. Wind loading ready reckoner for BS 6399: Part 2: 1997
- Wind load design requirements for single ply roofing (S11B-17)
- Wind loading – single ply roofing guide and checklist (S11A-16)
Describe falls and drainage layouts, including: crickets, ponding, and freezing
BS 6229: 2003 Code of practice for flat roofs with continuously supported coverings
- Falls and drainage for single ply roofs (S10-10)
Describe rainfall intensity and calculation
BS-EN 12056-3: 2001 Part 3 Gravity drainage systems inside buildings. Roof drainage, layout & calculation
Describe thermal: properties, performance, and effects
Describe resistance to loads and foot traffic
Describe resistance to fire
BS 476-3: 2004. Fire tests on building materials and structures. Classification and method of test for external fire exposure to roofs
DD CEN / TS 1187: 2012 Test methods for external fire exposure to roofs
List the main types of information for safe working
Safety legislation (H&SAWA, COSHH, PUWER, LOLER, Work at Height), HSE guidance, manufacturer’s documents, British/EN/ISO Standards, codes of practice, association guidance, building regulations, SDS sheets, company procedures, risk assessments
Additional information about this standard
Single Ply Roofing Association (SPRA)
SPRA sets the design standards for single ply roofing in the UK. You can view the following free guides on the SPRA website
- Design guide for single ply roofing
- Acoustic control
- Falls and drainage for single ply roofs (S10-10)
- Guarantees – Guidance for clients and designers (S4-17)
- Homeowners guide 2017 (S12-17)
- Membrane product substitution checklist (S3-17)
- Non-destructive testing of single ply membrane roofing coverings (S8-17)
- Protection of single ply membrane roofs-guidance and checklist (SDG13-17)
- Recycling scoping study (2017)
- Safety – Design considerations for reduced risk (S5-17)
- Sealants in single ply roofing (S7-17)
- Ten reasons to specify SPRA contractor (S2-17)
- Welding guidance (S14-18)
- Wind load design requirements for single ply roofing (S11b-17)
- Wind loading – single ply roofing guide and checklist (S11a-16)
SPRA also publishes ‘Component quality schemes’ for materials and equipment. These take existing standards (BS and BS-EN) and apply specific levels of performance required in single ply applications:
- Expanded polystyrene insulation boards for inverted roofs (CQS2B-17)
- Expanded polystyrene insulation boards for roofing (CQS2A-17)
- Extruded polystyrene insulation boards for roofing (CQS3-17)
- Factory-manufactured single ply membrane gutters (CQS8-17)
- Fall protection anchor devices (CQS9-17)
- Mechanical fasteners for attachment of insulation and membranes (CQS5-17)
- Rock mineral wool insulation boards for roofing (CQS4-17)
- Roof access hatches (CQS7-17)
- Rooflights (CQS6-17)
- SPRA-IMA quality standards (CQS1-17)
- Vacuum insulated roof panels (VIPS) for roofing applications (CQS10-17)
British Flat Roofing Council
- Flat roofing: Design and good practice 1993
Training at height
- BS 8454:2006 Code of practice for delivery of training & education for work at height and rescue
Advisory Committee for Roof Safety
Work at Height Safety Association
- View WAHSA technical guidance notes. These are a free resource, provided and maintained by WAHSA and its member companies for reference. They assist specifiers, managers, and end users of fall protection equipment.
Health and Safety Executive (HSE) Working at height guides
You can view British and European standards on the BSI website
Note: Currently there are no British standards that cover polymeric single ply waterproofing membranes.
- BS 476-3: 2004. Fire tests on building materials and structures. Classification and test methods for roofs
- BS-EN 1991-1-2 6399: Part 2:1997 Code of practice for wind loads
- BS-EN 1991-1-4: 2005 + A1:2010 Eurocode 1. Actions on structures. General actions. Wind actions
- BS 4841-4: 2006. Rigid polyurethane (PUR) and polyisocyanurate (PIR) products for building end-use applications. Specification for laminated insulation boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under non-bituminous single-ply roofing membranes
- BS 6399-2:1997. BS6399-2: 1997 Loading for buildings. Part 2: Code of practice for wind loads
- BS 6229: 2003 Code of practice for flat roofs with continuously supported coverings
- BS 8217: 2005 Reinforced membranes for roofing - Code of practice
- BS 8437: 2005 Code of practice for select/use/maintain personal protection systems and equipment
- BS 8454: 2006 Code of practice for delivery of training & education for work at height and rescue
- BS-EN 12056-3: 2001 Part 3 Gravity drainage systems in buildings. Roof drainage, layout & calcs
- BS-EN 13956: 2003 Flexible (plastic and rubber) sheets for roof waterproofing. Definitions/characteristics
- HB 10139:1997. Wind loading ready reckoner for BS 6399: Part 2: 1997
- DD CEN / TS 1187: 2012 Test methods for external fire exposure to roofs
See relevant legislation
- The Work at Height Regulations (WHR) 2005
- Statutory Rules of Northern Ireland
- The Building (Scotland) Regulations 2004
- Building and Buildings, England and Wales: The Building Regulations 2010
- Control of Substances Hazardous to Health Regulations (COSHH) 2002
- Health and Safety at Work etc Act 1974