Filter your search results

Filter by occupational area

















































































Filter by status of standard



Search results

Found 1517 short duration training standards. The standards are sorted in alphabetical order.

If your search has too many results, leave out words such as ‘and’ or ‘the’ and try again.

Use the Download as CSV button to save these search results to your computer. We update these standards frequently, so you should check the website and download a new version regularly.

302.1 Installing, maintaining and removing temporary traffic management on rural and urban roads

This standard aims to provide employees working within the Highway Electrical Sector the underpinning knowledge required for the understanding and use of equipment for Safety at Street Works and Road Works, as appropriate to the scope of their work on site.

360 Pedestrian operated plant: preparing for work

This training standard is in development and will be published shortly

360 Pedestrian operated plant: roles and responsibilities

This training standard is in development and will be published shortly

360 Pedestrian operated plant: setting up for work

This training standard is in development and will be published shortly

360 Pedestrian operated plant: shutting down

This training standard is in development and will be published shortly

360 Pedestrian operated plant: travelling and manoeuvring

This training standard is in development and will be published shortly

360 Pedestrian operated plant: working tasks

This training standard is in development and will be published shortly

A culture of achieving quality

This training standard is in development and will be published shortly

A101 - Acoustic performance of façades

This standard is in development and will be published shortly

Abrasive cleaning equipment operation

The purpose of this standard is to provide the candidate with the knowledge and skills to operate abrasive cleaning equipment used for façade preservation.

Abrasive cleaning equipment, health, safety and environment

The purpose of this standard is to provide the candidate with the knowledge of how to locate and apply the requirements of the health, safety, and environmental aspects, that are related to the use of abrasive cleaning equipment used for façade preservation.

Abrasive wheels storage, transport, dressing and mounting

This training standard is also known as: Abrasive Wheels. The purpose of this standard is to provide the candidate with knowledge and skills in the safe: storage, transport, dressing and mounting of abrasive wheels.

Abutment of partitions and linings

This standard is in development and will be published shortly

Access systems for working in complex areas

This training standard is in development and will be published shortly

Access towers (hire industry)

The purpose of this standard is to provide the candidate with skills and knowledge needed to assemble access towers. Mobile towers, also known as scaffold towers or alloy towers are an integral part of the hire industry. These structures are a key item for working at height.

Access, egress and rescue from a confined space

This standard is in development and will be published shortly

Adhesives and grouts for internal tiling

The purpose of this standard is to provide the candidate with the knowledge and skills to select and apply adhesive and grout for the internal tiling situation.

Adhesives, sealants and bitumen for liquid roofing

The purpose of this standard is to provide the candidate with the knowledge and skills to select and use adhesives, sealants, and bitumen for liquid roofing.

Advanced scaffold inspection training scheme (ASITS)

This standard covers the training requirements for professional Scaffold Inspectors, Scaffolding Supervisors and Management and others who are responsible for statutory scaffold inspection for more complex structures. This training standard was previously held under the occupational area Scaffolding. It is in development and will be published shortly.

Advanced scaffolder

This standard covers the training requirements for a scaffolding operative to be able as a member of a team, to erect, alter and dismantle the scaffolds safely and in their correct sequence. The trained operative will also be suitably qualified to lead operations as a charge hand in a scaffold gang carrying out all types (Basic and Advanced) of scaffolding works. The completion of this course allows an operative to register and qualify for a NVQ/SVQ level three. This training standard was previously held under the occupational area Scaffolding.

Advanced scaffolder system scaffold cantilever drop scaffold

This standard covers the training requirements for an operative to be sufficiently trained in erecting and dismantling cantilever scaffolds in the workplace and be eligible to qualify for a NVQ Diploma in Accessing Operations and Rigging (Construction) level 2. This training standard was previously held under the occupational area Scaffolding.

Advanced scaffolder system scaffold pedestrian, vehicle ramp and staircase

This standard covers the training requirements for an operative to interpret complex design drawings and safely and correctly erect and dismantle scaffolds, staircases and ramps in the correct sequence. This training standard was previously held under the occupational area Scaffolding.

Advanced scaffolder system scaffold shoring scaffold 

This standard covers the training requirements for an operative to safely and correctly erect and dismantle shoring scaffolds. This training is an additional unit for an operative who is registered for a NVQ Diploma in Accessing Operations and Rigging (Construction) level 3. This training standard was previously held under the occupational area Scaffolding.

Advanced scaffolder system scaffold slung, hanging scaffold

This standard covers the training requirements for an operative to safely and correctly set out, erect and dismantle tubular hanging scaffolds. This training standard was previously held under the occupational area Scaffolding.

Advanced scaffolder system scaffold temporary roof 

This standard covers the theory and practical training requirements for an operative to safely and correctly erect and dismantle temporary roof scaffolds. This training standard was previously held under the occupational area Scaffolding.

Advanced site skills

This training standard is in development and will be published shortly

Advanced techniques for working with lime in buildings

This standard covers the necessary knowledge and skills for trainees to work with lime products in traditional buildings including fibrous work, repairing, maintaining and moulding to existing fabric.

Agricultural tractor theory test

Full details of this standard will be published shortly.

Agricultural tractor training

Full details of this standard will be published shortly

Agricultural tractors practical test

Full details of this standard will be published shortly

Airbag assembly and installation operations

This training standard is in development and will be published shortly

Airless spray paint machine (GRACO)

The purpose of this standard is to provide the candidate with the knowledge and skills to safely set up and use an airless spray paint machine (Graco type) to install road markings using cold liquid type paints.

Airless Spray Plaster

This standard is in development and will be published shortly

Airtightness testing L1 & L2 - ATTMA Accredited

This standard is in development and will be published shortly

Alternative lining systems

The purpose of this standard is to provide the candidate with knowledge to determine the mechanical and atmospheric basis for installing approved alternative flue liner systems.

Alternative repair strategies for traditional buildings

The purpose of training delivered against this standard is to provide candidates with the knowledge to repair solid-walled properties pre-dating around 1939, using traditional building repair strategies that are sympathetic and complementary to the original structure.

Anchoring

This training standard is in development and will be published shortly

Anchors for steeplejacks

This training standard is in development and will be published shortly.

Anchors for steeplejacks, installation and use

This training standard was previously held under the occupational area Steeplejack and lightning protection. It is in development and will be published shortly

Ancillary licensed maintenance engineer

This standard covers theoretical and practical skills to undertake ancillary licensed work (licensed maintenance) as defined in the approved code of practice (ACoP), currently L143 Second Edition, Regulation 10 - Training licensed work.

Ancillary licensed maintenance supervisor/manager

This standard covers the theoretical and practical skills to undertake ancillary licensed work (licensed maintenance) as defined in the approved code of practice (ACoP), currently L143 Second Edition, Regulation 10 - Training licensed work. On successful completion of this course, delegates should be able to safely supervise and manage work with ancillary (licensed scaffold) works.

AP11 fastclip machine

This training standard is in development and will be published shortly

Application details in single ply roofing

The purpose of this standard is to provide the candidate with the knowledge for detailing of single ply roofing, where the roof changes geometry or shape, and where the roof meets another part of the building.

Application of filler/joint cement directly to plasterboard systems

This standard is in development and will be published shortly

Application of plasterboard via direct bond

This standard is in development and will be published shortly

Apply cementitious coatings, multi-coat renders and crystallisation active materials

This training standard is in development and will be published shortly

Apply liquid, multi-pack, resin and mastic asphalt systems

This training standard is in development and will be published shortly

Apply wall coverings to interior systems

This training standard is in development and will be published shortly

Applying finishing plaster to background surfaces

This training standard is in development and will be published shortly

Applying plasters to complex internal surfaces

This training standard is in development and will be published shortly

Applying projection plaster and maintaining equipment

This training standard is in development and will be published shortly

Applying Venetian polished plaster and micro cement

The purpose of this standard is to provide the candidate with the knowledge and skills to apply venetian polished plaster and micro cement to an existing dry lined or wet-plastered wall and ceiling. This scope of this standard excludes dry lining or wet-plastering of a wall or ceiling.

Appointed person (lifting operations) practical test

Full details of this standard will be published shortly

Appointed person (lifting operations) theory test

Full details of this standard will be published shortly.

Appointed person (lifting operations) training

Full details of this standard will be published shortly

Architectural recognition

This standard focuses on the key knowledge and in-depth understanding in relevant architectural areas.

Asbestos air monitoring and clearance procedures

The objective of this qualification is to provide analysts and similar specialists to have the knowledge to to enable them to carry out inspection and testing of asbestos works that have been carried out to ensure they meet the correct standards required by HSG248.

Asbestos awareness

The purpose of training delivered against this standard is to provide candidates with an understanding of the risks of exposure to asbestos and how to avoid work which may disturb asbestos-containing materials.

Asbestos bulk analysis

The objective of this qualification is to provide learners with the knowledge and understanding to be able to carry out analysis of samples in the workplace.

Asbestos in soils

This standard covers the theoretical skills needed to undertake work on sites (brownfield and greenfield sites) which have been identified as having asbestos containing materials within the soils; or in which asbestos containing materials have been identified

Asbestos licensed contract manager

This training standard is in development and will be published shortly

Asbestos licensed contract manager refresher

This training standard is in development and will be published shortly

Asbestos licensed operative

This training standard is in development and will be published shortly

Asbestos licensed operative refresher

This training standard is in development and will be published shortly

Asbestos licensed scaffolding operative

The purpose of training delivered against this standard is to provide candidates with the training content specified by the Health and Safety Executive (HSE) for scaffolders working near asbestos-containing materials (ACMs).

Asbestos licensed supervisor

This training standard is in development and will be published shortly

Asbestos licensed supervisor refresher

This training standard is in development and will be published shortly

Asbestos management for duty holders

The objective of this training is to provide learners with the knowledge and understanding to carry out duty holders' role to be able to identify, assess and manage any asbestos containing materials on their premises.

Asbestos non-licensed operative refresher

This training standard is in development and will be published shortly

Asbestos non-licensed removal

This standard demonstrates the elements needed to provide delegates with the theoretical and practical skills to undertake non-licensed work with asbestos

Asbestos non-licensed supervisor/manager

This standard covers the theoretical and practical skills needed to undertake non-licensed work with asbestos Including NNLW as defined in the approved code of practice (ACoP), currently L143 Second Edition, Regulation 10 - Training for non-licensable work.

Asbestos surveying and sampling strategies

The aim of this training is to provide background and practical knowledge in the surveying of buildings for asbestos, and to provide general guidance on management procedures necessary to minimise exposure to any identified asbestos.

Asphalt chip spreader

This standard is in development and will be published shortly

Asphalt paver advanced service engineer (wheeled or tracked)

This standard aims to train engineers in maintaining wheeled or tracked asphalt pavers.

Asphalt paver basic service engineer (wheeled or tracked)

This standard aims to train engineers in maintainance of wheeled or tracked asphalt pavers.

Asphalt paver driver (tracked)

This standard aims to provide training in driving tracked asphalt pavers.

Asphalt paver driver (wheeled)

This standard aims to provide training in driving wheeled asphalt pavers.

Asphalt paver operator (wheeled or tracked)

This standard aims to provide training in operating tracked or wheeled asphalt pavers.

Asphalt technology: an introduction

This training standard is in development and will be published shortly

Assembly basic, forming of door and window openings, abutments

This training standard is in development and will be published shortly

Assembly practical advanced

This training standard is in development and will be published shortly

Asset management using road surface treatments

This training standard is in development and will be published shortly

AutoCAD for Beginners (Woodworking)

This training standard is in development and will be published shortly

Autocad intermediate (woodworking)

This training standard is in development and will be published shortly

AVN Training

This standard is in development and will be published shortly

Balconies, podiums and inverted roof systems

The purpose of this standard is to provide the candidate with the knowledge and skills to install liquid roofing on: balconies, podiums and inverted roof systems.

Ballast tamper

This training standard is in development and will be published shortly

Base coats

This training standard is in development and will be published shortly.

Basement water management

The purpose of training delivered against this standard is to provide candidates with the knowledge of pump stations and accessories relating to drainage of cavity membrane systems including: theory, application, survey, and installation.

Basic access systems erector (BASE)

This training standard is in development and will be published shortly. This training standard was previously held under the occupational area Scaffolding.

Basic board installation

This training standard is in development and will be published shortly.

Basic electrical safety competence for access, movement and egress (BESC AME)

This standard in development is being deactivated as it is being replaced by Full standards: Power Networks - Access, Movement & Egress (BESC/AME) Underground Cables, Power Networks - Access, Movement & Egress (BESC/AME) Overhead Lines.

Basic trowel skills

This training standard is in development and will be published shortly.

Basics of building dynamics

This training standard is in development and will be published shortly

Batten and membrane installation

The purpose of this standard is to provide the candidate with the knowledge and skills to install battens and membrane for a new slate and/or tile roof.

Batten roll roofing

The purpose of training delivered against this standard is to provide candidates with the knowledge and skills to install batten roll roofing.

Behavioural safety in construction introduction

This training standard is in development and will be published shortly.

Behavioural safety in construction leadership

This training standard is in development and will be published shortly.

Bench joinery, workshop and on site

This standard focuses on skills needed to carry out bench joinery in a workshop and on site in a heritage environment.

Best practices, legislation, regulations, standards, and country court protocol for chimney engineering

The purpose of this standard is to provide the candidate with knowledge to use best practices in relation to: legislation, building regulations, BS EN standards, codes of practice, contracts, HSE guidance, method statements, work scopes, programs of work, and county court protocol. This training standard includes Chimney Legislation, Regulations, British and European Standards.

BIM management

This training standard is in development and will be published shortly

BIM technical/software training

This training standard is in development and will be published shortly

Board detailing

This training standard is in development and will be published shortly.

Bonding, taping and positioning insulation board

The purpose of training delivered against this standard is to provide candidates with a practical introduction to the fixing of insulation boards and how to position, bond and tape as per specification

Brazing for roofers

This training standard is in development and will be published shortly

BREEAM accredited professional

This training standard is in development and will be published shortly

BREEAM assessor course

This training standard is in development and will be published shortly

Brick slip systems

The purpose of training against this standard is to provide candidates with knowledge of brick slip systems and what they are used for.

Brick soffit systems

The purpose of training against this standard is to provide the candidate with the knowledge and skill to be able to safely and effectively install brick soffit systems.

Bricks and brickmaking

The standard is in development and will be published shortly.

Brickwork conservation, control and philosophies

The standard is in development and will be published shortly.

British Damage Management Association construction techniques

This training standard is in development and will be published shortly

British Gypsum site managers advisors certificate

This training standard is in development and will be published shortly

Broken colour effects

This training standard is in development and will be published shortly

BS8000 part 16 code of practice

The purpose of this standard is to provide the candidate with the knowledge and understanding to implement BS8000 part 16, which is the core standard to which the sector operates and will underpin subsequent practical skill modules (sealant application and fire rated sealants).

Building information modelling (BIM) introduction

This training standard is also known as: BIM Awareness. The purpose of this standard is to provide learners with an opportunity to explore the principles and practices of BIM within the built environment.

Building regulations and control for residential homes

This training standard is in development and will be published shortly.

Building regulations and liabilities for multi-occupancy installations

This training standard is in development and will be published shortly

Building regulations and standards

The purpose of this standard is to provide the candidate with the knowledge to comply with current legislation, standards and guides.

Built up roofing (RBM) waterproof membrane roofing systems preparation of roof decking

The standard covers the knowledge and skills to use their gas torches/hot air guns safely.

Built up roofing (RBM) waterproof membrane roofing systems insulation - thicknesses and Part L and Part B of Building Regs

This standard covers the knowledge and skills to understand insulation flat board and tapered and the importance of Building Regs Parts L and B.

Built up roofing (RBM) waterproof membrane roofing systems installation

This standard covers the knowledge and skills to install waterproof membrane roofing systems.

Built up roofing (RBM) waterproof membrane roofing systems protection inspection and testing

This standard covers the knowledge and skills to understand insulation flat board and tapered.

Built up roofing (RBM) waterproof membrane roofing systems penetrations

This standard covers knowledge and skills to install waterproof membrane to roof penetrations.

Built up roofing (RBM) waterproof membrane roofing systems abutments

This standard covers knowledge and skills to understand insulation - flat board and tapered - and to understand the importance of Building Regs Parts L and B.

Built up roofing (RBM) waterproof membrane roofing systems detailing

This standard covers the knowledge and skills to install waterproof membrane roofing systems.

Built up roofing (RBM) waterproof membrane Safe2Torch

This standard covers the knowledge and skills to install waterproof membrane to roof penetrations.

Built-up wall cladding construction and specification

The purpose of this standard is to provide the candidate with knowledge of managing the built-up wall package, from concept to handover.

Bursting

This standard covers the training requirements for an operative in bursting activities.

Bursting advanced

This standard covers the training requirements for advanced concrete bursting operations

CAD for site engineers

This standard focuses on skills which can be used to optimise control point accuracy, collect and manipulating survey data, set out using design information and calculating quantities. The content is relevant to all types of construction including earthworks, roads, houses, buildings, foundations, piles, structural steel, structures and reinforced concrete.

Calcium sulphate screeds

This training standard is in development and will be published shortly

Calculating overturning moments

This training standard was previously held under the occupational area Steeplejack and lightning protection. It is in development and will be published shortly

Cantilever towers for users

This standard ensures that the training experienced tower users receive equips them with the skillset for more complex tower builds, taking into account the principles of counterbalance calculations for the use of kentledge in cantilever applications. This training standard was previously held under the occupational area Scaffolding.

Cantilevered crane loading platforms

This training standard is in development and will be published shortly

Car parks: products and application methods

The purpose of this standard is to provide the candidate with the knowledge and skills to install liquid roofing systems on car park surfaces.

Carbon Coach

This training standard is in development and will be published shortly

Carpentry skills for modular construction

This training standard is in development and will be published shortly

Carpentry Skills for Supervisors

This standard is in development and will be published shortly.

CCDO chargehand

The purpose of this standard is to upskill experienced demolition Topmen who oversee a team of Operatives in their responsibilities, such as towards health and safety, general hazards on a site, environmental issues, time management and contracts.

CCDO chargehand refresher

This standard covers the training requirements needed to maintain and update the knowledge and skills of chargehand operatives.

CCDO demolition labourer

The purpose of this standard is to cover the necessary training for the general labouring duties required as directed and supervised by a Chargehand or above.

CCDO demolition refurbishment operative

The purpose of this standard is to cover the supervised duties of a demolition and refurbishment operative, including non-structural demolition, mobile work tools, non-structural hot works and how to segregate materials for recycling.

CCDO demolition refurbishment operative refresher

This standard covers the information needed to refresh demolition and refurbishment operatives' training.

CCDO manager

The purpose of this standard is to enable candidates to understand all aspects of project management and how to run a demolition site effectively, including behavioural safety in the workplace.

CCDO manager refresher

The purpose of this standard is to update the knowledge of the Demolition manager and ensure that they adhere to current working practices in line with health and safety legislation.

CCDO supervisor

The purpose of this standard is train supervisors in responsibilities for maintaining systems for health, safety, welfare and enviromental protection, in planning, supervising, coordinating works and checking performance and delivery of works.

CCDO supervisor refresher including demolition safety awareness

The purpose of this standard is to update the knowledge of the Demolition Supervisor and ensure that they adhere to current working practices in line with Health & Safety Legislation.

CCDO topman

The purpose of this standard is to enable experienced operatives to gain knowledge in structural elements of demolition, operating work tools, work in accordance with RAMS, interpreting drawings/instructions and structural hot works.

CCDO topman refresher

The purpose of this standard is to update the knowledge of the Demolition Topman.

CDM 2015 awareness

The purpose of training delivered against this standard is to provide candidates with an introduction to the CDM 2015 legislation. The legislation applies to domestic and commercial projects from concept to completion and details duty holder roles and legal requirements.

CDM 2015 for clients

The purpose of training delivered against this standard is to provide candidates with an introduction to the CDM 2015 legislation, duty holder roles and the client’s responsibilities.

CDM 2015 for principal contractors

The purpose of training delivered against this standard is to provide candidates with an introduction to the CDM 2015 legislation, duty holder roles and the principal contractor and contractor responsibilities.

CDM 2015 for principal designers

The purpose of training delivered against this standard is to provide candidates with an introduction to the CDM 2015 legislation, duty holder roles and the principal designer and designer responsibilities.

Ceiling fixing installation

This training standard is in development and will be published shortly

Certificate of Competence in Environmental Noise Measurement or the Diploma course

This standard is in development and will be published shortly

Certificated surveyor in structural waterproofing (CSSW) examination preparation

The purpose of training delivered against this standard is to refresh and update candidates with the knowledge to achieve the certificate of: Certificated surveyor in structural waterproofing (CSSW).

Certificated surveyor of timber and dampness in buildings (CSTDB) examination preparation

The purpose of training delivered against this standard is to prepare candidates for the examination to achieve the certificate: Certificated surveyor of timber & dampness in buildings (CSTDB)

Chain sawing

This standard covers the training requirements for an operative in chain sawing activities.

Chemical and water cleaning, health, safety and environment

The purpose of this standard is to provide the candidate with the knowledge of chemical and water cleaning used in façade preservation, in relation to: health, safety, and the environment.

Chemical cleaning equipment operation

The purpose of this standard is to provide the candidate with the knowledge and skills to operate chemical cleaning equipment used for façade preservation.

Chimney and flue principles

The purpose of this standard is to provide the candidate with knowledge of the design, operation, and erection of chimneys and flues.

Chimney lining components, methods, and procedures

The purpose of this standard is to provide the candidate with knowledge to install a flue lining in a chimney.

Chimney terminals and cowls

The purpose of this standard is to provide the candidate with knowledge of design and installation requirements for terminals and cowls.

CIOB CMP health, safety and the environment

The aim of this training is to provide construction workers, who have significant management experience but lack formal honours degree qualifications the specialist knowledge and skills required to manage construction projects effectively.

CIOB CMP management

The aim of this training is to provide construction workers, who have significant management experience but lack formal honours degree qualifications the specialist knowledge and skills required to manage construction projects effectively.

Circular saw safety

This training standard is in development and will be published shortly

CISRS Basic access systems scaffold

This training standard is in development and will be published shortly. This training standard was previously held under the occupational area Scaffolding.

Cladding practical

This training standard is in development and will be published shortly

CNC framing

This training standard is in development and will be published shortly

Co-ordinating brickwork requirements

The purpose of training against this standard is to provide the candidates with an overview of how the brickwork team integrates with the wider project team.

Cold weather concreting

This training standard is designed for candidates who are involved in the concreting operations. The focus is on realistic design and site preventative measures for concreting in cold weather, covering both short and long term damage mechanisms.

Cold weather working requirements for bricklayers

The purpose of training against this standard is to provide candidates with knowledge of the key requirements for bricklayers working in cold weather.

Combined towers and low-level for users

This standard ensures that operatives are trained in how to safely assemble, dismantle and relocate low level access units and standard mobile access towers without risk of personal injury to the self or others. This training standard was previously held under the occupational area Scaffolding.

Commercial management of construction contracts

The purpose of this standard is to provide a one day introduction to give an overview of the commercial aspects of a civil engineering contract.This training standard is also known as: Commercial Management.

Compact crane theory test

Full details of this standard will be published shortly.

Compact crane: 360 pick and carry practical test

Full details of this standard will be published shortly

Compact crane: 360 pick and carry training

Full details of this standard will be published shortly

Compact crane: luffing static duties practical test

Full details of this standard will be published shortly

Compact crane: luffing static duties training

Full details of this standard will be published shortly

Compact crane: mobile industrial practical test

Full details of this standard will be published shortly

Compact crane: mobile industrial training

Full details of this standard will be published shortly

Compact crane: static stabilisers practical test

Full details of this standard will be published shortly

Compact crane: static stabilisers training

Full details of this standard will be published shortly

Compiling roof specifications

This training standard is in development and will be published shortly.

Complex roof geometry

This training standard is in development and will be published shortly

Composite panel lifting and manipulating equipment operation

The purpose of this standard is to provide the skills needed to be a safe and efficient vacuum lifter. It should cover an introduction to the machine and controls, correct lifting procedures and the operator's safety code.

Compressed-air tools in construction

This training standard is in development and will be published shortly

Computerised numerical control (CNC) for offsite woodwork manufacture

This training standard is in development and will be published shortly. It was previously known as CAD CAM and CNC in woodworking.

Concrete aggregates awareness

This training standard will enable trainees to develop their knowledge of aggregates, how and when they’re used, and the practical impacts and consequences of using different aggregates.

Concrete identity testing

This training standard is designed for candidates who undertake or supervise identity testing on site and to understand the significance of the test methods and assessment of results.

Concrete placing compacting and finishing

This training standard is designed to familiarise candidates with different methods of concrete transport and placing methods, best practice in compacting and finishing, and the influence of concrete mix design.

Concrete polishing

Polished concrete is a sustainable design option with numerous types of embellishments and finishes. This standard will equip individuals with the knowledge and skills to install or renovate a range of different floors (or walls and ceilings).

Concrete pump operator training

Full details of this standard will be published shortly

Concrete pump supervisor training

Full details of this standard will be published shortly

Concrete pump trailer mounted practical test

Full details of this standard will be published shortly

Concrete pump trailer mounted theory test

Full details of this standard will be published shortly.

Concrete pump trailer mounted training

Full details of this standard will be published shortly

Concrete pump truck mounted boom practical test

Full details of this standard will be published shortly

Concrete pump truck mounted boom theory test

Full details of this standard will be published shortly.

Concrete pump truck mounted boom training

Full details of this standard will be published shortly

Concrete strength assessment - cores and indirect methods

This training standard is designed for candidates who supervise assessing hardened concrete for strength onsite primarily through core testing but with reference to other indirect non-destructive testing (NDT) methods.

Concrete testing to BSEN206-1

This training standard is in development and will be published shortly

Condensation and atmospheric moisture management course

The purpose of training delivered against this standard is to provide candidates with the knowledge to analyse raw information collected by atmospheric data loggers, present this to the homeowner or property professional, and devise rectification strategies.

Confined Space - Tunnel Entry and Associated Emergency Procedures

This standard is in development and will be published shortly

Confined spaces in construction high risk

This training standard is in development and will be published shortly

Confined spaces in construction introduction

The purpose of this standard is to acquaint candidates with the principles of working safely in confined spaces and awareness of the legislation applying to confined spaces working.

Confined spaces in construction low to medium risk

This training standard is in development and will be published shortly

Conservation and restoration of stonemasonry

The standard is in development and will be published shortly.

Conservation law

This training standard was previously under the Heritage stonemasonry occupational area. The standard is in development and will be published shortly.

Conservation or restoration of timber-based products

The standard focuses on technical information and resources for the conservation or restoration of timber-based products

Conservation or restoration of timber-based products upskilling

The standard is in development and will be published shortly.

Conservation philosophies and controls for façade preservation

The purpose of this standard is to provide the candidate with the knowledge of conservation philosophies and controls for façade preservation.

Conservation principles, statutory consent and controls

The standard is in development and will be published shortly.

Construction contract introduction

The purpose of this standard is to provide candidates with knowledge of delegates in how to construct a legally binding contract including the basic fundamentals of contract law and management within the supply chain function.

Construction health, safety and environment gas (gas escapes)

This is one of the standards held by the Energy & Utility Skills Register

Construction of control joint details in partitions

This standard is in development and will be published shortly

Construction of door and window openings (all manufacturers)

This standard is in development and will be published shortly

Construction of metal stud partitions and linings (basic and deflection)

This standard is in development and will be published shortly

Construction safe working practices introduction

This training standard is in development and will be published shortly

Construction technology

The aim of this training is to provide construction workers, who have significant management experience but lack formal honours degree qualifications the specialist knowledge and skills required to manage construction projects effectively.

Contracts and commercial practice

The aim of this training is to provide construction workers, who have significant management experience but lack formal honours degree qualifications the specialist knowledge and skills required to manage construction projects effectively.

Controlled techniques for asbestos removal

The purpose of training delivered against this intermeidate standard is to provide candidates with the training content specified by the Health and Safety Executive (HSE) in the Control of Asbestos Regulations 2012 for operatives doing licensed work with asbestos.

Controller of site safety (initial)

This training standard is in development and will be published shortly

Controller of site safety (recertification)

This training standard is in development and will be published shortly

Controller of site safety (with OIL and CRP)

This training standard is in development and will be published shortly

Controller of site safety (with OLP)

This training standard is in development and will be published shortly

Controlling health risks in construction

This training standard is in development and will be published shortly

Conveying pump theory test

Full details of this standard will be published shortly.

Conveying pump: pneumatic all types practical test

Full details of this standard will be published shortly

Conveying pump: pneumatic all types training

Full details of this standard will be published shortly

Conveying pump: worm piston (up to 50mm outlet) with mixer practical test

Full details of this standard will be published shortly

Conveying pump: worm piston (up to 50mm outlet) without mixer training

Full details for this standard will be published shortly

Conveying pump: worm piston (up to 50mm outlet) with mixer training

Full details for this standard will be published shortly

Conveying pump: worm piston (up to 50mm outlet) without mixer practical test

Full details of this standard will be published shortly

Corian advanced fabricator

This training standard is in development and will be published shortly

Corian fabricator

This training standard is in development and will be published shortly

Corian worktop installation

This training standard is in development and will be published shortly

COSHH for road marking operatives

The purpose of this course is to ensure road marking operatives have a relevant understanding of COSHH relating to the specialist materials used in the road marking industry.

Crane controller

This training standard is in development and will be published shortly

Crane/lifting operations supervisor practical test

Full details of this standard will be published shortly

Crane/lifting operations supervisor theory test

Full details of this standard will be published shortly.

Crane/lifting operations supervisor training

Full details for this standard will be published shortly

Crawler crane: over 10 tonnes practical test

Full details of this standard will be published shortly

Crawler crane: over 10 tonnes theory test

Full details of this standard will be published shortly.

Crawler crane: over 10 tonnes training

Full details for this standard will be published shortly

Crawler: tractor/dozer practical test

Full details of this standard will be published shortly.

Crawler: tractor/dozer theory test

Full details of this standard will be published shortly.

Crawler: tractor/dozer training

Full details for this standard will be published shortly

Crawler: tractor/side boom practical test

Full details of this standard will be published shortly.

Crawler: tractor/side boom theory test

Full details of this standard will be published shortly.

Crawler: tractor/side boom training

Full details for this standard will be published shortly

Cross country pipeline health, safety and environmental training

This training standard is in development and will be published shortly

Crusher practical test

Full details of this standard will be published shortly.

Crusher theory test

Full details of this standard will be published shortly.

Crusher training

Full details for this standard will be published shortly

Curtain walling design and construction

The purpose of this standard is to provide the candidate with knowledge of managing the curtain walling package (building envelopes), from concept to handover.

Cutting and assembling complex framing components

This training standard is in development and will be published shortly

Decontamination for asbestos removal operatives

The purpose of training delivered against this standard is to provide candidates with the training content specified by the Health and Safety Executive (HSE) in the Control of Asbestos Regulations 2012 for operatives doing licensed work with asbestos.

Decorative lead sheet work and casting installation

The standard is in development and will be published shortly.

Decorative lead sheet work and casting maintenance

The standard is in development and will be published shortly.

Decorative resin flooring

This standard is in development and will be published shortly

Decorative sheet metal work and casting

The standard is in development and will be published shortly.

Defect and fault recognition

The purpose of this standard is to provide the candidate with knowledge to recognise defects and faults in chimneys and flues, and skills to use diagnostic equipment.

Defect prevention - introduction

The purpose of training delivered against this standard is to provide candidates with an introduction to best practice within the home building sector.

Defect prevention – external works

The purpose of training delivered against this standard is to provide candidates with an introduction to common defects in external works within the home building sector and to provide guidance on prevention.

Defect prevention – finishes

The purpose of training delivered against this standard is to provide candidates with an introduction to common defects in finishes within the home building sector and to provide guidance on prevention.

Defect prevention – foundations

The purpose of training delivered against this standard is to provide candidates with an introduction to common defects when dealing with foundations within the home building sector and to provide guidance on prevention.

Defect prevention – roofs

The purpose of training delivered against this standard is to provide candidates with an introduction to common defects when working on roofs within the home building sector and to provide guidance on prevention.

Defect prevention – substructure

The purpose of training delivered against this standard is to provide candidates with an introduction to common defects in substructure works within the home building sector and to provide guidance on prevention.

Defect prevention – superstructure

The purpose of training delivered against this standard is to provide candidates with an introduction to common defects in superstructure works within the home building sector and to provide guidance on prevention.

Defect prevention for flooring

The purpose of training delivered against this standard is to provide delegates with an introduction to defect prevention for flooring in commercial floorcovering installation.

Defect recognition, cause and effect for heritage stonemasonry

The standard is in development and will be published shortly.

Defect recognition, cause and effect for heritage wood occupations

This training module, ‘Defect recognition, cause and effect for heritage wood occupations’ is intended to focus on the trainee being able to identify, describe and offer appropriate solutions to defects, damage and insect attack.

Defect survey and repair

This training standard is in development and will be published shortly.

Deflection heads: drylining

This training standard is in development and will be published shortly

Delay under NEC3

This standard is in development and will be published shortly

Demolition operations: skid steer tool carrier theory test

Full details of this standard will be published shortly.

Demolition operations: skid steer tool carrier, demolishing training

Full details for this standard will be published shortly

Demolition operations: skid steer tool carrier, demolishing practical test

Full details of this standard will be published shortly.

Demolition operations: skid steer tool carrier, extracting practical test

Full details of this standard will be published shortly

Demolition operations: skid steer tool carrier, extracting training

Full details for this standard will be published shortly

Demolition plant simulator foundation training

The purpose of this standard is to train novice demolition plant operators in the foundation skills when operating a demolition adapted excavator machine.

Demolition plant theory test

Full details of this standard will be published shortly.

Demolition plant: demolishing all heights practical test

Full details of this standard will be published shortly.

Demolition plant: demolishing all heights training

Full details for this standard will be published shortly

Demolition plant: demolishing up to 15 meters practical test

Full details of this standard will be published shortly.

Demolition plant: demolishing up to 15 meters training

Full details for this standard will be published shortly

Demolition plant: demolishing up to 30 meters practical test

Full details of this standard will be published shortly.

Demolition plant: demolishing up to 30 meters training

Full details for this standard will be published shortly

Demolition plant: lifting operations practical test

Full details of this standard will be published shortly.

Demolition plant: lifting operations training

Full details for this standard will be published shortly

Demolition plant: materials processing practical test

Full details of this standard will be published shortly.

Demolition plant: materials processing training

Full details for this standard will be published shortly

Demolition plant: pedestrian operated theory test

Full details of this standard will be published shortly.

Demolition plant: pedestrian operated, 180 slew practical test

Full details of this standard will be published shortly.

Demolition plant: pedestrian operated, 180 slew training

Full details for this standard will be published shortly

Demolition plant: pedestrian operated, all types practical test

Full details of this standard will be published shortly.

Demolition plant: pedestrian operated, all types training

Full details for this standard will be published shortly

Demolition plant: up to 10 tonnes practical test

Full details of this standard will be published shortly.

Demolition plant: up to 10 tonnes training

Full details for this standard will be published shortly

Demolition safety awareness

The purpose of this standard is to provide the candidate with knowledge about the hazards and safety aspects of demolition work, using hand and power tools.

Demolition skid steer

This training standard is in development and will be published shortly.

Design and construction process for swimming pools

The purpose of this standard is to provide the candidate with the knowledge and skills in the process of designing, building, and maintaining swimming pools.

Design and drawing for structural timber frames

This intermediate level standard provides the learner with the information and skills to competently design and draw a simple oak frame structure.

Design and selection of correct systems (acoustic/fire/loading and penetrations)

This standard is in development and will be published shortly

Design principles of single ply roofing

The purpose of this standard is to provide the candidate with the knowledge of the design principles for single ply roofing.

Design, select and assemble acoustic, air-loading and penetration systems

This training standard is in development and will be published shortly

Designing timber joints

This training standard is in development and will be published shortly

Dessicant drying and techniques in buildings

This standard is in development and will be published shortly

Details, terminations, flashings, gutters, night seals, faults and rectification

The purpose of this standard is to provide the candidate with the knowledge and skills to install and repair: details, terminations, flashings, gutters, and night seals.

Detection of buried services for construction 

The purpose of this standard is to provide candidates with the knowledge and skills to safely locate buried services using the cable avoidance tool (CAT) and generator (genny). This training standard is also known as: CAT and Genny; Cable Avoidance; Avoidance of Underground Services.

Develop and maintain a home build programme

The purpose of training delivered against this standard is to provide candidates with an introduction to best practice in managing a site build programme.

Diamond drilling advanced

The purpose of training against this standard is to provide the candidates with the knowledge and understanding of carrying out Diamond Drilling operations safely

Diamond tipped segmented blades

This standard covers the training requirements for an operative in using diamond tipped segmented blades.

Dismantling and removing work area protection

This training standard is in development and will be published shortly

Domestic smoke nuisance including inspection, fault-finding and pressure testing

The purpose of this standard is to provide the candidate with knowledge to inspect, fault-find and pressure test to determine if a chimney is a smoke nuisance.

Dormers and cladding

This training standard is in development and will be published shortly.

Dragline practical test

Full details of this standard will be published shortly.

Dragline theory test

Full details of this standard will be published shortly.

Dragline training

Full details for this standard will be published shortly

Drainage and stormwater management in construction

This training standard is in development and will be published shortly

Drilling and grouting

This training standard is in development and will be published shortly

Drilling applications and methods

This training standard is in development and will be published shortly

Drilling of core walls for the installation of fire prevention and control systems

This training standard is in development and will be published shortly.

Drone technology in the construction and engineering environments

This training standard is in development and will be published shortly.

Drone use in construction

This standard is in development and will be published shortly

Dry lining, taping and jointing

This training standard is in development and will be published shortly.

Dry-fixed systems

This training standard is in development and will be published shortly.

Dump truck rigid chassis theory test

Full details of this standard will be published shortly.

Dump truck: articulated chassis theory test

Full details of this standard will be published shortly.

Dump truck: articulated chassis, all sizes practical test

Full details of this standard will be published shortly..

Dump truck: articulated chassis, all sizes training

Full details for this standard will be published shortly

Dump truck: articulated chassis, up to 15 tonnes practical test

Full details of this standard will be published shortly.

Dump truck: articulated chassis, up to 15 tonnes training

Full details for this standard will be published shortly

Dump truck: rigid chassis, all sizes (tracked) practical test

Full details of this standard will be published shortly.

Dump truck: rigid chassis, all sizes (tracked) training

Full details for this standard will be published shortly

Dump truck: rigid chassis, all sizes (wheeled) practical test

Full details of this standard will be published shortly.

Dump truck: rigid chassis, all sizes (wheeled) training

Full details for this standard will be published shortly

Dump truck: rigid chassis, up to 15 tonnes practical test

Full details of this standard will be published shortly.

Dump truck: rigid chassis, up to 15 tonnes training

Full details for this standard will be published shortly

Dump truck: rigid chassis, up to 50 tonnes practical test

Full details of this standard will be published shortly.

Dump truck: rigid chassis, up to 50 tonnes training

Full details for this standard will be published shortly

Dust management in construction

This training standard is in development and will be published shortly

Duty to manage asbestos

this standard covers basic understanding of the legislative requirements of CAR 2012 with particular reference to the duty holder.

Edge protection manager

This training standard is in development and will be published shortly.

Edge protection systems installation and use

The purpose of this standard is so that a trained operative will be able to erect, alter and dismantle scaffolds safely and in their correct sequence. This standard is the established trade competency for the scaffolding industry and enables scaffolders to lead or partake in the majority of scaffolding operations.

Effective snagging and pre-handover checks

The purpose of training delivered against this standard is to provide candidates with an introduction to snagging and handover of a new home build.

Electrical submersible pump training for the hire sector

This training standard is in development and will be published shortly.

Electrical testing of plant and machinery for the hire sector


Emissions for defective appliances and chimney systems 

The purpose of this standard is to provide the candidate with knowledge to determine defective appliances and chimney systems, and their emissions.

Engineering rig attendant mini-piling and land drilling

The purpose of this standard is to train new starters in the safety requirements when working around mini piling and land drilling equipment.

Engineering supervisor (initial)

This training standard is in development and will be published shortly

Entrance matting and matwell frame installation

The purpose of the training is to enable trainees to become competent installers of Entrance Matting, MatWell Frames and related products.

Environmental and hazardous waste introduction

This training standard is in development and will be published shortly

Environmental and sustainability for liquid roofing

The purpose of this standard is to provide the candidate with knowledge of the environmental and sustainability aspects of liquid roofing systems.

Environmental and sustainability issues

The purpose of this standard is to provide the candidate with knowledge and skills of demolition-related environmental and sustainability issues.

Environmental awareness in construction

This training standard is in development and will be published shortly

Environmental management in construction

This training standard is in development and will be published shortly.

Environmental supervision in construction training

Also known as Site Environmental Awareness Training Scheme (SEATS) and Introduction to environmental awareness in construction training. The purpose of this standard is to ensure the learner will know how to manage, protect, mitigate and improve environmental aspects of construction sites and surrounding areas and to learn the impact construction has on the environment.

Equality and diversity

This training standard is in development and will be published shortly

Erecting timber roof structures on a timber frame building

The purpose of training delivered against this standard is to provide candidates with an introduction to erecting timber roof structures on a timber frame building.

Estimating and surveying

This training standard is in development and will be published shortly.

Estimating for construction

This training standard is in development and will be published shortly

Estimating for interior contracting

This training standard is in development and will be published shortly

Estimating for painting and decorating

This training standard is in development and will be published shortly

Estimating for slating and tiling

This training standard is in development and will be published shortly.

Evaluating ventilation in existing buildings

This standard is in development and will be published shortly

Excavation in the road/highway - NRSWA Unit 1, Unit 2, Unit 3

This standard covers units of competence for trained operatives in relation to the New Roads and Street Works Act 1991 (NRSWA).

Excavator 180 above 5 tonnes practical test

Full details of this standard will be published shortly.

Excavator 180 above 5 tonnes theory test

Full details of this standard will be published shortly.

Excavator 180 above 5 tonnes training

Full details for this standard will be published shortly

Excavator 180 below 5 tonnes practical test

Full details of this standard will be published shortly.

Excavator 180 below 5 tonnes theory test

Full details of this standard will be published shortly.

Excavator 180 below 5 tonnes training

Full details for this standard will be published shortly

Excavator 360 above 10 tonnes theory test

Full details of this standard will be published shortly.

Excavator 360 above 10 tonnes: lifting operations training

Full details for this standard will be published shortly

Excavator 360 above 10 tonnes: tracked practical test

Full details of this standard will be published shortly.

Excavator 360 above 10 tonnes: tracked training

Full details for this standard will be published shortly

Excavator 360 above 10 tonnes: wheeled practical test

Full details of this standard will be published shortly.

Excavator 360 above 10 tonnes: wheeled training

Full details for this standard will be published shortly

Excavator 360 below 10 tonnes theory test

Full details of this standard will be published shortly.

Excavator 360 below 10 tonnes: lifting operations training

Full details for this standard will be published shortly

Excavator 360 below 10 tonnes: tracked practical test

Full details of this standard will be published shortly.

Excavator 360 below 10 tonnes: tracked training

Full details for this standard will be published shortly

Excavator 360 below 10 tonnes: wheeled practical test

Full details of this standard will be published shortly.

Excavator 360 below 10 tonnes: wheeled training

Full details for this standard will be published shortly

Excavator simulation foundation training

This training standard is in development and will be published shortly

Exothermic welding in construction

This training standard was previously held under the occupational area Steeplejack and lightning protection. It is in development and will be published shortly

External bench training

The purpose of training delivered against this standard is to provide candidates with an introduction to external bench training.

External wall insulation introduction

This training standard is in development and will be published shortly

Fabricating complex timber joints

This training standard is in development and will be published shortly

Fabricating structural timber frames

This intermediate level standard provides the learner with the information and skills to safely and competently fabricate a simple oak frame structure.

Falsework systems installation, use and removal

This training standard is in development and will be published shortly

Fibre installation and testing

This standard is in development and will be published shortly

Fibrous plaster repair

The standard is in development and will be published shortly.

Fibrous plasterwork conservation

The standard is in development and will be published shortly.

Fibrous plasterwork installation

The standard is in development and will be published shortly.

Fibrous plasterwork production

The standard is in development and will be published shortly.

Fibrous works materials, selecting and mixing

The standard is in development and will be published shortly.

Finish applications

The purpose of training delivered against this standard is to provide delegates with an introduction to the application of finishes to wooden floors using approved methods in commercial and domestic environments.

Finishes, fixtures and fittings

This training standard is in development and will be published shortly.

Fire door inspection scheme (FDIS) foundation module

This training standard is in development and will be published shortly

Fire door inspection scheme (FDIS) glazing

This training standard is in development and will be published shortly

Fire door inspection scheme (FDIS) inspector transition module

This training standard is in development and will be published shortly

Fire door inspection scheme (FDIS) ironmongery and signage (part 2)

This training standard is in development and will be published shortly

Fire door inspection scheme (FDIS) ironmongery and signage (part 1)

This training standard is in development and will be published shortly

Fire door inspection scheme (FDIS) metal fire doors

This training standard is in development and will be published shortly

Fire door inspection scheme (FDIS) seals

This training standard is in development and will be published shortly

Fire door inspection scheme (FDIS) timber fire doors and frames

This training standard is in development and will be published shortly

Fire protection to the structural frame of buildings

This training standard is in development and will be published shortly

Fire rated sealants

The purpose of this standard is to provide the candidate with the knowledge and skills to use fire rated sealants.

Fire resistant doors, industrial shutters and associated hardware

This training standard is in development and will be published shortly

Fire resistant glazing

This training standard is in development and will be published shortly

Fire resistant steel shutters – installation, repair and maintenance

This training standard is in development and will be published shortly

Fire resistant walls, floors and ceilings

This training standard is in development and will be published shortly

Fire resisting ductwork, fire and smoke dampers

This training standard is in development and will be published shortly

Fire safety, fire marshal for built-up felt roofing operatives

The purpose of this standard is to provide the knowledge and skills for fire safety and fire marshalling when using flammable materials for built-up felt roofing.

Fire science for the construction industry

This training standard is in development and will be published shortly

Fire stopping, penetration seals, cavity barriers and the building envelope

The purpose of training delivered against this standard is to provide candidates with an introduction to best practice of fire safety within the home building sector.

First aid for CITB-registered levy-exempt employers

The purpose of this standard is to provide the knowledge and skills to manage and treat an emergency first aid situation in the workplace.

Fit aluminium cover trims and skirting to interior systems

This training standard is in development and will be published shortly

Fitted furniture renovation

This training standard is in development and will be published shortly

Fitting flush doors with patio and decking levels to create inside and outside spaces

This training standard is in development and will be published shortly

Fixed gauge tiling

This training standard is in development and will be published shortly.

Fixing internal stone

This training standard is in development and will be published shortly

Fixing metal cladding panels

This training standard is in development and will be published shortly

Fixing stone

This training standard is in development and will be published shortly.

Fixing techniques

This training standard is in development and will be published shortly

Fixing techniques for sheets and panels

This training standard is in development and will be published shortly

Flat roofing (RBM) vapour control layers

This standard covers an introduction in understanding the necessity of a bituminous vapour control layer.

Flexible flue systems liners

The purpose of this standard is to provide the candidate with knowledge to determine the mechanical and atmospheric basis for installing a flexible flue liner system.

Floor repair

The purpose of training delivered against this standard is to provide delegates with an introduction to wood floor repair using approved methods in commercial and domestic environments.

Floor sawing

This standard covers the training requirements for an operative in floor sawing activities.

Floor sawing advanced

This standard covers the training requirements for advanced floor sawing activities.

Flooring industry managers course

This training standard is in development and will be published shortly.

Flourinated greenhouse gas (F-Gas) and ozone depleting substances (ODS) regulations

This training standard is in development and will be published shortly

Flourinated greenhouse gas (F-Gas) refresher

This training standard is in development and will be published shortly.

Flowable screeds

This training standard is in development and will be published shortly

Forklift side loader practical test

Full details of this standard will be published shortly.

Forklift side loader theory test

Full details of this standard will be published shortly.

Forklift side loader training

Full details for this standard will be published shortly

Form flashing, openings, joints and abutments

This training standard is in development and will be published shortly

Forming abutments, service penetrations and control joints

This training standard is in development and will be published shortly.

Forming of cavities and correct installation of ties

The purpose of training delivered against this standard is to provide candidates with the practical skill and knowledge to be able to safely and effectively construct a cavity, paying particular attention to the correct fixings of wall ties.

Formwork construction and installation for foundations

The purpose of this standard is to provide the candidate with the knowledge and skills to construct and install formwork for foundations.

Formwork introduction

The purpose of training delivered against this standard is to provide candidates with an introduction to Formwork and its associated risks to health and safety and environment.

Formwork proprietary systems installation, use and removal

This training standard is in development and will be published shortly

Forward tipping dumper theory test

Full details of this standard will be published shortly.

Forward tipping dumper: tracked practical test

Full details of this standard will be published shortly.

Forward tipping dumper: tracked training

Full details for this standard will be published shortly

Forward tipping dumper: wheeled practical test

Full details of this standard will be published shortly.

Forward tipping dumper: wheeled training

Full details for this standard will be published shortly

Gas membrane installation part 1

This training standard is in development and will be published shortly.

Gas membrane installation part 2

This training standard is in development and will be published shortly.

Gas membrane installation part 3: below ground installation

This training standard is in development and will be published shortly

Gas membrane installation preparation part 2

This training standard is in development and will be published shortly.

Gas membrane unloading, storage and preparation part 1

This training standard is in development and will be published shortly.

Gas membrane validation inspection

This training standard is in development and will be published shortly.

Gas network construction – installation of mains product/asset up to and including medium pressure

This is one of the standards held by the Energy & Utility Skills Register

Gas Network Pipeline (Analyse and Interpret Gas Leakage Surveys)

This is one of the standards held by the Energy & Utility Skills Register.

Gas network pipeline (installation of engineering and assets above 180mm - 355mm diameter)

This is one of the standards held by the Energy & Utility Skills Register

Gas network pipeline (installation of gas engineering and assets from 90mm up to 180mm diameter)

This is one of the standards held by the Energy & Utility Skills Register

Gas Network Pipeline (Testing of Gas Network Engineering)

This is one of the standards held by the Energy & Utility Skills Register.

Gas Network Pipeline (Testing of Gas Network Leakage & Location)

This is one of the standards held by the Energy & Utility Skills Register.

Gas network pipeline tools and equipment

This is one of the standards held by the Energy & Utility Skills Register

Gas Network pipework up to 35mm diameter

This is one of the standards held by the Energy & Utility Skills Register

Gas safe control of operations (SCO)

This standard in development is being deactivated as it is being replaced by Full standards: Safe Control of Gas Network Pipeline Operations Authorising Non Routine Operations (SCO4) Safe Control of Gas Network Pipeline Operations Authorising Routine Operations (SCO5) Safe Control of Gas Network Pipeline Operations Authorising Routine Operations (SCO5)

Geology

This training standard is in development and will be published shortly

Geosynthetics and steel meshes

This training standard is in development and will be published shortly

Geothermal

This training standard is in development and will be published shortly

Gilding by transfer and loose leaf

This training standard is in development and will be published shortly

Glass reinforced polyester for flat roofing

This training standard is in development and will be published shortly.

Glass reinforced polyesters 

This title was previously known as: Glass reinforced polyesters and resilient polyesters. The purpose of this standard is to provide the candidate with the knowledge to apply glass reinforced polyesters to a roof.

Global Navigation Satellite System (GNSS) Awareness

The purpose of this standard is for candidates to gain the skills required to set out or take surveys using Global Navigation Satellite System (GNSS). The content is relevant to all types of construction including earthworks, roads, houses, buildings, foundations, piles, structural steel, structures and reinforced concrete.

Grader practical test

Full details of this standard will be published shortly.

Grader theory test

Full details of this standard will be published shortly.

Grader training

Full details for this standard will be published shortly

Green roofs

The purpose of this standard is to provide the candidate with the knowledge and skills to install Green roofs onto an existing liquid roofing system.

Ground gas protection measures - getting it right

The purpose of training delivered against this standard is to provide candidates with the knowledge of general ground gas protection.

Ground gas protection measures in construction: installation and verification

This training standard is in development and will be published shortly.

Ground investigation

This training standard is in development and will be published shortly

Groundworks introduction

The purpose of this standard is to provide the candidate with knowledge about groundworks on construction sites, which covers: ground investigation, site clearance, stabilisation works, site services, and landscaping.

Grouting the formwork base plate

This training standard is in development and will be published shortly

Guidelines for tiling

The purpose of this standard is to provide the candidate with the basic knowledge of to fix tiles.

Hand applied screed markings

The purpose of this standard is to provide the skills and knowledge for candidates to hand apply screed applied road markings.

Hand arm vibration in construction

This training standard includes Hand Arm Vibration Management for the Plant Hire Sector. The purpose of this standard is to provide the basic awareness for recognising, managing, and mitigating the effects of hand-arm vibration.

Hand held diamond drilling

This standard covers the required training for an operative in hand held diamond drilling activities.

Hand held disc cutter safety in construction

This training standard is also known as: Petrol Driven Cut Off Saws (PDCOS). The purpose of training delivered against this standard is to provide candidates knowledge and skills for the safe preparation and use of portable abrasive wheel cutters.

Hand held hydraulic concrete crushing

This standard covers the training requirements for an operative in hand held crushing and breaking activities.

Hand held line removal

The purpose of this standard is to provide the candidate with the knowledge and skills to remove thermoplastic road markings using a hot compressed air (HCA) lance and a hand propelled scabbler (pneumatic).

Hand held tools and equipment

This training standard is in development and will be published shortly

Hand jointing and finishing

This training standard is in development and will be published shortly

Hand trolley operation

This training standard is in development and will be published shortly

Handling materials in woodworking

This training standard is in development and will be published shortly

Hanging mural wallcoverings

This training standard is in development and will be published shortly

Hanging specialised wallcoverings

This training standard is in development and will be published shortly

Hanging wallcoverings to complex surfaces

This training standard is in development and will be published shortly

Hanging wide width vinyl

This training standard is in development and will be published shortly

Harness inspection for the plant hire sector

The purpose of this standard is to give the candidate the skills and knowledge needed to correctly inspect and teach the methods of inspecting safety harnesses and associated equipment across differing environments for working at height, as an in-company appointed person. Training is specifically designed for any person who is involved with hiring out harnesses and associated equipment.

Harness use and inspection

This training standard replaces includes IPAF Harness Use and Inspection. This standard is in development and will be published shortly.

Hazards and controls associated with the home building sector

The purpose of training delivered against this standard is suitable for those who have or are about to enter the construction or civil engineering industry to provide candidates with an introduction to the hazards and controls in place within the home building sector.

Health and safety awareness for interior systems

This standard is in development and will be published shortly

Health and safety for construction directors

This is the generic standard for Health and safety for construction directors. It can be used for a variety of courses outside the Site Safety Plus group. This standard is in development and will be published shortly.

Health and safety for construction directors - SSP

This standard is exclusively used for the Site Safety Plus (SSP) health and safety courses. If you are looking for a similar standard to use against other courses, please use the generic Health and Safety for Construction Directors standard. The purpose of this standard is to provide a training opportunity for directors to evaluate, analyse and explore principles and practices for leading health and safety at work within the built environment. This standard is also known as: Director's Role for Health and Safety (DRHS); Leading Health and Safety at Work.

Health and safety for drilling and sawing

This standard covers the training requirements for an operative to operate drilling and sawing equipment safely.

Health and safety in construction site management

This is the generic standard for Health and safety in construction site management. It can be used for a variety of courses outside the Site Safety Plus group, such as IOSH Managing safely in construction. This standard is in development and will be published shortly.

Health and safety in construction site management - refresher

Also known as Site Management Safety Training Scheme-Refresher (SMSTS-R). This training standard is in development and will be published shortly.

Health and safety in construction site management - SSP

This standard is exclusively used for the SSP health and safety courses. If you are looking for a similar standard to use against other courses please use the generic Health and Safety in Construction Site Management standard. The purpose of training delivered against this standard is to provide site managers with the ability to implement all health, safety, welfare, and environmental legislation. This standard is also known as Site Management Safety Training Scheme (SMSTS).

Health and safety in construction site supervision - refresher

Also known as Site Supervisor Safety Training Scheme-Refresher (SSSTS-R). This training standard is in development and will be published shortly

Health and safety in construction site supervision - SSP

This standard is exclusively used for the Site Safety Plus (SSP) health and safety courses. If you are looking for a similar standard to use against other courses, please use the generic Health and Safety in Construction Site Supervision standard. The purpose of this standard is to provide a training opportunity for site supervisors to analyse, evaluate and explore principles and practices for supervising health and safety at work within the built environment. This standard is also known as Site Supervisor Safety Training Scheme (SSSTS).

Health and safety in construction site supervision

This is the generic standard for Health and safety in construction site supervision. It can be used for a variety of courses outside the Site Safety Plus group. This standard is in development and will be published shortly.

Health and safety in the hire and rental workplace

This standard is in development and will be published shortly

Health and safety in tunnelling

This training standard is also known as: Tunnelling Safety Training Scheme (TSTS). It is in development and will be published shortly.

Heat drying equipment

This standard is in development and will be published shortly

Heavy timber framework

This standard focuses on the selection, orientation, identification, conservation or restoration of heavy timber framework.

Helical bar installation

The purpose of training delivered against this standard is to provide candidates with a practical introduction in the use of Helical bars for masonry stabilisation and reinforcement.

Helical bar surveyor

The purpose of training delivered against this standard is to provide candidates with an introduction to the use of Helical bars for masonry stabilisation and reinforcement.

Heritage leadwork

The standard is in development and will be published shortly.

High friction surfacing

This training standard is in development and will be published shortly

High pressure water jetting

This training standard is in development and will be published shortly

Highway inspection - legal

This standard aims to provide highways inspectors a detailed knowledge of highways law; enforcement; knowledge of how to successfully prosecute cases and defend claims, including how to collect and present evidence.

Highway inspection - technical

The standard aims to provide a good basic knowledge of all areas of highways maintenance and inspection in which they might be involved.

Highway safety inspection 

The purpose of the standard is to ensure that highway inspectors are trained, qualified and competent in the identification and assessment of defects, including potholes, through a scheme accredited by the Highway Inspectors Board.

Highway safety inspection - refresher

The purpose of the standard is to ensure that highway inspectors can refresh their knowledge and are trained, qualified and competent in the identification and assessment of defects, including potholes, through a scheme accredited by the Highway Inspectors Board.

Highways England common induction course

The aim of this standard is to provide a common Health & Safety site induction across all areas of the Highways England's Strategic Road Netword (SRN).

Hire equipment service technician (HEST) - electrical equipment

This standard is in development and will be published shortly

Hire Equipment Service Technician (HEST) - generators and lighting towers

This standard is in development and will be published shortly

Hire equipment service technician (HEST) - materials hoists

This standard is in development and will be published shortly

Hire equipment service technician (HEST) - mechanical equipment

This standard is in development and will be published shortly

Hire equipment service technician (HEST) - non-mechanical equipment

This standard is in development and will be published shortly

Hire equipment service technician (HEST) - powered access

This standard is in development and will be published shortly

Hire equipment service technician (HEST) - road-tow equipment

This standard is in development and will be published shortly

Hire equipment service technician (HEST) - small plant

This standard is in development and will be published shortly

Hire equipment service technician (HEST) - traffic management equipment

This standard is in development and will be published shortly

Hire equipment service technician (HEST) - welding, heating and cutting equipment

This standard is in development and will be published shortly

Hire equipment: health and safety in equipment hire

The purpose of this standard is to provide the candidate with an overview of responsibilities for health and safety in the hire industry and the systems and policies needed to comply.

Hire of abrasive wheels

This training standard is in development and will be published shortly.

Hire of cartridge and IC fixing tools

The purpose of this standard is to give candidates an understanding of policies and procedures relating to the safe hire of cartridge and IC fixing tools.

Hire of ladders and low level staging

This training standard is in development and will be published shortly.

Hire of small plant

This training standard also covers Hire desk operations small plant. This standard is in development and will be published shortly.

Hire procedures and practical applications

The purpose of this standard is to train staff and supervisors to complete the checks and basic maintenance required to ensure equipment is supplied in an as new condition. The training will include practical elements relating to the correct procedures for compliance in respect of the equipment within the hire fleet.

Historic bricklaying and brickwork

The standard is in development and will be published shortly.

Historic brickwork failures and remedial actions

The standard is in development and will be published shortly.

Historic brickwork re-pointing

The standard is in development and will be published shortly.

Historic glass and glazing conservation

This training standard is in development and will be published shortly.

Historic jointing and pointing

The standard is in development and will be published shortly.

History of clay tile and slate roofing

The standard is in development and will be published shortly.

Hoist theory test

Full details of this standard will be published shortly.

Hoist: passenger/goods combined practical test

Full details of this standard will be published shortly.

Hoist: passenger/goods combined training

Full details for this standard will be published shortly

Hoist: rack and pinion goods practical test

Full details of this standard will be published shortly.

Hoist: rack and pinion goods training

Full details for this standard will be published shortly

Hoist: rope operated goods practical test

Full details of this standard will be published shortly.

Hoist: rope operated goods training

Full details for this standard will be published shortly

Hoist: transport platform practical test

Full details of this standard will be published shortly.

Hoist: transport platform training

Full details for this standard will be published shortly

Home build site management

The purpose of training delivered against this standard is to provide experienced site managers with an introduction to managing a home build site.

Home building introduction

The purpose of training delivered against this standard is to provide candidates with an introduction to home construction, providing an overview of typical construction methods, terminology and technologies used within the UK.

Hot applied roof membranes: rubberised bitumen

The purpose of this standard is to provide the candidate with the knowledge and skills to apply hot roof membranes: rubberised bitumen.

Hot work passport

This training standard is in development and will be published shortly

Hot working permits and risks including insurers requirements

This training standard is in development and will be published shortly.

Housing warranty and after sales service

The purpose of training delivered against this standard is to provide candidates with an introduction to builder responsibilities for new builds and conversions over the lifetime of the warranty provision.

Identification of materials

The standard is in development and will be published shortly.

Identifying blemishes, defects and deteriorating concrete

This standard was previously known as Defects and deterioration in concrete. This training standard is designed for candidates who want to identify blemishes defects and deterioration in concrete and explore remedial options.

Identifying defective and non-approved open-closed combustion appliances

The purpose of this standard is to provide the candidate with knowledge to identify defective and non–approved open-closed combustion appliances.

Identifying, storing and handling resources for interior systems

This standard is in development and will be published shortly

Individual working alone

This training standard is in development and will be published shortly

Industrial coating applicators scheme (ICATS) abrasive blast cleaning

The objective of this training standard is to ensure that operatives gain an understanding in the many applications of abrasive blast cleaning and the various uses of preparation. It also enables operatives to appreciate the role of the abrasive blast cleaning operator for industrial applications.

Industrial coating applicators scheme (ICATS) protective coatings application (core module)

This purpose of this training standard is to ensure that operatives understand the basic constituents and properties of coatings used for corrosion control, and to gain an insight into coating systems.

Industrial coating applicators scheme (ICATS) spray painting

The purpose of this standard is so that operatives gain an understanding of how liquid paints are applied.

Industrial coatings supervisor course

This standard is in development and will be published shortly

Industrial concrete flooring: concrete buggy operator

This training standard is in development and will be published shortly

Industrial concrete flooring: fibre integration operator

This training standard is in development and will be published shortly

Industrial concrete flooring: laser screed operator

This standard covers the training needed to start operating a laser screeding machine.

Industrial concrete flooring: power trowel operator

This training standard is in development and will be published shortly

Industrial concrete flooring: topping spreader operator

This training standard is in development and will be published shortly

Industrial concrete flooring: wheeled screed operator

This training standard is in development and will be published shortly

Industrial forklift truck practical test

Full details of this standard will be published shortly.

Industrial forklift truck theory test

Full details of this standard will be published shortly.

Industrial forklift truck training

Full details for this standard will be published shortly

Industry standards

This training standard is in development and will be published shortly.

Industry standards and tolerances for bricklaying and related occupations

This training standard is in development and will be published shortly

Information sources and fixing specifications

This training standard is in development and will be published shortly.

Inset road studs appreciation

The purpose of this standard is to provide overview knowledge of installing inset road studs by both the milling and drilling methods.

Inspect and complete user maintenance on plant and machinery

This training standard is in development and will be published shortly

Inspection of fire doors in construction

This training standard is in development and will be published shortly

Inspection, maintenance and repairs for liquid roofing

The purpose of this standard is to provide the candidate with the knowledge and skills to inspect, maintain, and repair liquid roofing systems.

Install blown and sprayed systems

This training standard is in development and will be published shortly.

Install cavity drainage membrane systems

This training standard is in development and will be published shortly

Install direct bond systems

This training standard is in development and will be published shortly

Install drains, sumps and pumping ancillaries

This training standard is in development and will be published shortly

Install metal wall and timber framed linings

This training standard is in development and will be published shortly

Install quilted internal wall insulation systems

This training standard is in development and will be published shortly

Install ridged systems

This training standard is in development and will be published shortly

Install sheet membrane systems

This training standard is in development and will be published shortly

Installation of BG Gypwall partitions 

This training standard is in development and will be published shortly

Installation of Casoline MF ceilings

This training standard is in development and will be published shortly

Installation of fire doors

This training standard is in development and will be published shortly

Installation of roof lights to all roofs

The purpose of this standard is to provide the candidate with knowledge and skills to install a rooflight (also known as skylight) to a roof.

Installation of twin frame and staggered stud partitions

This training standard is in development and will be published shortly. This standard was previously known as: Twin framed, staggered stud, overheight, partially boarded and shaft wall metal partitions

Installing and maintaining work area protection

This training standard is in development and will be published shortly

Installing cladding variants and roof lights

This training standard is in development and will be published shortly

Installing complex fibrous plaster components

This training standard is in development and will be published shortly

Installing direct bond dry linings

This training standard is in development and will be published shortly

Installing double skin and insulation

This training standard is in development and will be published shortly

Installing excavation support

This training standard is in development and will be published shortly

Installing fire barriers and breaks

The purpose of training delivered against this standard is to provide candidates with the knowledge and skills to install fire barriers and breaks.

Installing fire protection encasements for steelwork with GypLyner encasements

This training standard is in development and will be published shortly

Installing fire protection encasements for steelwork with Glasroc F Firecase

This training standard is in development and will be published shortly

Installing fixtures and fittings in a timber frame building

The purpose of training delivered against this standard is to provide candidates with an introduction to the installation of fixtures and fitting in a timber frame building.

Installing flashings and apertures

This training standard is in development and will be published shortly

Installing floors within timber frame erections

The purpose of training delivered against this standard is to provide candidates with an introduction to installing floors within timber frame erections.

Installing mechanically fixed plasterboards

This training standard is in development and will be published shortly

Installing rainwater goods

This training standard is in development and will be published shortly

Insulated concrete formwork

This standard covers the process of training people who plan, install and then manage the concrete pour for insulated concrete formwork (ICF).

Insulation calculations, condensation risk and vapour control layers

The purpose of this standard is to provide the candidate with knowledge of thermal and sound insulation for liquid-applied roofs, to: make thermal and sound insulation calculations, evaluate condensation risk, and select vapour control layers.

Insulation types and thermal properties

The purpose of this standard is to provide the candidate with knowledge of the thermal insulation for liquid-applied roofing systems.

Interior and exterior work materials, selecting and mixing

The standard is in development and will be published shortly.

Interlocking tiles introduction

The purpose of this standard is to provide the candidate with the knowledge and skills to install interlocking tiles for a new roof, including: battens, ridge tiles, and verge tiles.

Interlocking tiling

The purpose of this standard is to provide the candidate with the knowledge and skills to install interlocking tiles for a new roof, including the: membrane, battens, main tiles, ridge tiles, hip tiles, verge tiles, valley tiles, fittings, and flashings.

Internal ceramic tiling to sheet and board substrates

The purpose of this standard is to provide the candidate with the knowledge and skills to tile internally onto overlay sheet and board substrates on walls and floors.

Internal fixing of cavity drainage membranes

This training standard is in development and will be published shortly

Internal wall insulation

This training standard is in development and will be published shortly

Internal wall insulation quality assurance systems

This training standard is in development and will be published shortly

Internal Wall Insulation: DryLiner

This training standard is in development and will be published shortly

Internal wall insulation: GypLyner IWL

This training standard is in development and will be published shortly

Internal wall insulation: GypLyner Universal

This training standard is in development and will be published shortly

Interpreting plans and drawings

The purpose of training delivered against this standard is to provide candidates with an introduction to site plans and drawings used in the house building sector.

Introduction to abrading surfaces including machine and hand sanding

This standard is in development and will be published shortly

Introduction to concrete and its constituents

This training standard is an introduction to the constituents of concrete and their impact on the strength, durability, handling and placing of concrete.

Introduction to health and safety in construction

Also known as Health and Safety Awareness (HSA). The purpose of this standard is to provide the candidate with knowledge and skills required to work safely in a construction environment.

Introduction to hydraulics

This standard is in development and will be published shortly.

Introduction to identifying laying grid suspended ceiling systems

This standard is in development and will be published shortly

Introduction to JCT suite of contracts

This standard is in development and will be published shortly

Introduction to joint design and frame engineering

This intermediate level standard will provide the attendee with the knowledge and skills to design, identify and specify appropriate joints in a simple oak frame structure.

Introduction to liquid roofing

This title was previously known as: Introduction to liquid roofing (eLearning). The purpose of this standard is to provide the candidate with introductory knowledge to liquid roofing.

Introduction to measures/mixtures for drywall adhesive, joint filler, joint cement

This standard is in development and will be published shortly

Introduction to movement joints

The purpose of training against this standard is to provide candidates with an introduction to the provision of movement joints in masonry construction.

Introduction to sealant application gunning techniques

The purpose of this standard is to provide the candidate with the initial knowledge and skills to develop their gunning techniques for applying sealants.

Introduction to sealant application tooling techniques

The purpose of this standard is to provide the candidate with the initial knowledge and skills to develop their tooling techniques for applying sealants.

Introduction to sealant application, preparation

The purpose of this standard is to provide the candidate with the initial knowledge and skills to develop their preparation techniques for applying sealants.

Introduction to setting out and installation of lay in grid systems

This standard is in development and will be published shortly

Introduction to setting out of basic metal stud partitions and wall linings, including reading off plans and verbal communication

This standard is in development and will be published shortly

Introduction to the built heritage

The standard is in development and will be published shortly.

Introduction to the piling industry and techniques

The purpose of this standard is to enable the candidate to develop their knowledge of piling technologies and how and when the different techniques are used and help contribute to a safe and effective working environment.

Introduction to working with lime in buildings

This standard covers the necessary knowledge and skills for trainees to work with lime products in traditional buildings including fibrous work, repairing, maintaining and moulding to existing fabric.

Joinery spraying

This training standard is in development and will be published shortly

Knotless safety net repair

This training standard is in development and will be published shortly.

Knotted safety net repair

This training standard is in development and will be published shortly.

Ladder and stepladder inspection

This training standard is in development and will be published shortly

Ladder and stepladder use

This training standard is in development and will be published shortly

Ladders and stepladders for instructors

The purpose of this training standard is train instructors to sufficient competency to be able to deliver a complete Ladder Association User and Inspection course.

Ladders and stepladders for managers

The scope of this standard is to ensure that managers are trained to a competent level to assess and determine when it’s appropriate to inspect a ladder or stepladder; record finding and recommend action to be taken if faults are found; and accurately record details of ladders and stepladders.

Laminate and floating wood fitting (commercial)

This training standard is in development and will be published shortly.

Laminate and floating wood fitting (domestic)

This training standard is in development and will be published shortly.

Large deck towers for users

This standard ensures that operatives are trained in how to safely assemble, dismantle and relocate access towers without risk of personal injury to the self or others. This training standard was previously held under the occupational area Scaffolding.

Large format tiles for internal tiling

The purpose of this standard is to provide the candidate with the knowledge and skills to select and install large format internal tiles.

Laser scanning for construction surveying

This training standard is in development and will be published shortly

Laying sand and cement screeds to levels and/or falls

This training standard is in development and will be published shortly

Lead flashing in pitched roofing

This training standard is in development and will be published shortly.

Lead sheet bossing basic

The purpose of training delivered against this standard is to provide candidates with an introduction to basic lead sheet bossing.

Lead sheet welding basic

The purpose of training delivered against this standard is to provide candidates with an introduction to basic lead sheet welding.

Leadership in construction project management

This training standard is in development and will be published shortly.

Leak detection methods for liquid roofing

The purpose of this standard is to provide the candidate with the knowledge and skills to detect and repair leaks on liquid roofs, using non-destructive methods.

Lean construction e-Learning bundle 6+ Modules

This training standard is in development and will be published shortly

Lean construction module 1: introduction to lean

This training standard is in development and will be published shortly

Lean construction module 2: problem solving and continuous improvement

This training standard is in development and will be published shortly

Lean construction module 3: 5S workplace organisation

This training standard is in development and will be published shortly

Lean construction module 4: 7 forms of waste

This training standard is in development and will be published shortly

Lean construction module 5: visual management

This training standard is in development and will be published shortly

Lean construction module 6: standardised work

This training standard is in development and will be published shortly

Lean construction module 7: collaborative planning

This training standard is in development and will be published shortly

Lean construction module 8: value stream mapping

This training standard is in development and will be published shortly

Lean construction: train the trainer programme

This training standard is in development and will be published shortly

Legal aspects, survey methodology and report writing  for waterproofing

The purpose of training delivered against this standard is to provide candidates with knowledge of the important legal aspects of structural waterproofing, good practices when conducting surveys, and writing meaningful reports.

Levelling and setting out by tape

The purpose of this standard is to covers the principles of levelling and setting out by tape which can be applied to all aspects of construction including earthworks, roads, buildings, foundations, piles, structural steel, structures, reinforced concrete and houses.

Lifting and moving heavy timbers

This intermediate level standard provides the learner with the information and skills to safely lift and move heavy timbers for a simple oak frame structure.

Lifting equipment hire

The purpose of this standard is to help hire staff to identify safe and unsafe equipment, carry out basic maintenance, undertake pre and off hire checks of basic lifting equipment and complete recording systems.

Lime and lime-based mortars

The standard is in development and will be published shortly.

Lime plastering introduction

The purpose of training delivered against this standard is to provide candidates with a practical introduction to the application of lime plastering for those undertaking lime repairs or refurbishment of traditional buildings.

Liquid applied membranes introduction

The purpose of this standard is to provide the candidate with the knowledge and skills to apply liquid membranes to a roof.

Liquid spray systems

The purpose of this standard is to provide the candidate with the knowledge and skills to apply single pack polyurethanes and polyureas to a roof using liquid spray equipment.

Loader compressor practical test

Full details of this standard will be published shortly.

Loader compressor theory test

Full details of this standard will be published shortly.

Loader compressor training

Full details for this standard will be published shortly

Loader/securer: non STGO theory test

Full details of this standard will be published shortly.

Loader/securer: non STGO training

Full details for this standard will be published shortly

Loader/securer: non stgo, lgv practical test

Full details of this standard will be published shortly.

Loader/securer: non STGO, LGV training

Full details for this standard will be published shortly

Loader/securer: non stgo, non lgv practical test

Full details of this standard will be published shortly.

Loader/securer: non STGO, non LGV training

Full details for this standard will be published shortly

Loader/securer: stgo practical test

Full details of this standard will be published shortly.

Loader/securer: STGO theory test

Full details of this standard will be published shortly.

Loader/securer: STGO training

Full details for this standard will be published shortly

Lookout

This training standard is in development and will be published shortly

Lorry loader theory test

Full details of this standard will be published shortly.

Lorry loader: clamshell bucket practical test

Full details of this standard will be published shortly.

Lorry loader: clamshell bucket training

Full details for this standard will be published shortly

Lorry loader: hook practical test

Full details of this standard will be published shortly.

Lorry loader: hook training

Full details for this standard will be published shortly

Lorry loader: hydraulic clamp practical test

Full details of this standard will be published shortly.

Lorry loader: hydraulic clamp training

Full details for this standard will be published shortly

Low level access in construction using prefabricated components

This training standard is also known as: PASMA Standard (various courses). is in development and will be published shortly. This training standard was previously held under the occupational area Scaffolding.

Low-level towers for users

This standard ensures that operatives are trained in how to safely assemble, dismantle and relocate access towers without risk of personal injury to the self or others. This training standard was previously held under the occupational area Scaffolding.

Machine applied markings appreciation

The purpose of this standard is to provide overview knowledge of the core skills in mobile road marking using these methods: spray, extrusion, and profile.

Machine control for machine operators

The purpose of this standard is to understand the principles and practices of using machine control for any aspect of groundworks and road construction. It is aimed at machine operators who are required to work with machine control equipment.

Machine control for site engineers

The purpose of this standard is to understand the principles and practices of using machine control for any aspect of groundworks and road construction.

Machine controller

This training standard is in development and will be published shortly

Machine controller attachments

This training standard is in development and will be published shortly

Maintain decorative sheet metal work and casting

The standard is in development and will be published shortly.

Maintenance and safe use of hand and power tools for interior systems

This standard is in development and will be published shortly

Maintenance of plant engines 1 day

This training standard is in development and will be published shortly

Maintenance of plant engines 2 days

This training standard is in development and will be published shortly.

Maintenance of plant engines 3 days

This training standard is in development and will be published shortly.

Maintenance of plant engines 4 days

This training standard is in development and will be published shortly.

Man-made cement fibre slating

This training standard is in development and will be published shortly.

Management of lifting operations in construction

This standard is in development and will be published shortly

Management of scaffolding for construction contractors

This training standard is in development and will be published shortly. This training standard was previously held under the occupational area Scaffolding.

Management of Work at Height

This standard is in development and will be published shortly

Managing and coordinating plant

This standard is for the training of candidates who manage and coordinate construction plant so that they have the skills and knowledge to effectively manage the application and movement of various plant and equipment types, and to ensure compliance with current legislation and good practice.

Managing and coordinating plant - refresher

This standard is for the refresher training of candidates attended and completed the Managing and Coordinating Plant course in the last 5 years.

Managing and supervising employees of woodworking machines

The purpose of training delivered against this standard is to provide candidates with guidance in the precautions to be taken to ensure safe working with woodworking machinery.

Managing lifting operations

This standard is in development and will be published shortly.

Managing the cladding package

The purpose of this standard is to provide the candidate with knowledge of managing the cladding package, from concept to handover.

Managing timber frame construction for home builders

The purpose of training delivered against this standard is to provide candidates with an introduction to best practice in the management of timber frame erection on site.

Manufacturers drylining systems training

This training standard is in development and will be published shortly

Marbling techniques advanced

This training standard is in development and will be published shortly

Marbling techniques introduction

This training standard is in development and will be published shortly

Masonry cutting and drilling

The purpose of this standard is to provide the candidate with the knowledge, safety procedures and skill to be able to cut and drill masonry with all types of cutting and drilling equipment.

Masonry support angle installation

The purpose of training delivered against this standard is to provide candidates with the knowledge and skill to be able to safely install a masonry support system.

Mast climbing work platform advanced installer

This training standard was previously held under the occupational area Powered access equipment. It is in development and will be published shortly

Mast climbing work platform demonstrator

This training standard was previously held under the occupational area Powered access equipment. It is in development and will be published shortly

Mast climbing work platform installer

This training standard was previously held under the occupational area Powered access equipment. It is in development and will be published shortly

Mast climbing work platform instructor

This training standard was previously held under the occupational area Powered access equipment. It is in development and will be published shortly

Mast climbing work platform mobile operator

This training standard was previously held under the occupational area Powered access equipment. It is in development and will be published shortly

Mast climbing work platform operator

This training standard was previously held under the occupational area Powered access equipment. It is in development and will be published shortly

Mast climbing work platform trainer

This training standard was previously held under the occupational area Powered access equipment. It is in development and will be published shortly

Material and equipment preparation

This training standard is in development and will be published shortly

Material identification for heritage wood occupations

This standard enables learners to identify and describe a range of materials associated with heritage woodwork.

Materials storage and protection

The purpose of training against this standard is to provide candidates with the knowledge to store and protect materials on site.

MDF cutting safety

The purpose of training delivered against this standard is to provide candidates with an introduction to the hazards associated with cutting Medium density fibreboards (MDF)

Mechanical and modern pointing systems

This training standard is in development and will be published shortly

Mechanical cutting tools

The purpose of this standard is to provide the candidate with knowledge and skills to use hand and power mechanical cutting tools for use in demolition activities such as: saws, shears, grinders, and hammers.

Mechanical jointing and finishing

This training standard is in development and will be published shortly

Mental health awareness

This training standard is one of a set of standards for mental health first aid training. The purpose of this standard is to provide candidates with the knowledge to: recognise mental health issues developing and start practical mental health conversations.

Mental health first aid

This training standard is one of a set of standards for mental health first aid training. The purpose of this standard is to provide candidates with the knowledge and skills to: recognise mental health issues, provide first aid response, support the person’s recovery, and signpost other services.

Mental health first aid champion

This training standard is one of a set of standards for mental health first aid training. The purpose of this standard is to provide candidates with the knowledge and skills to become a mental health first aid (MHFA) Champion.

Metal cladding introduction

The purpose of this standard is to provide an introduction to the basic design process and basic design specification of metal cladding systems.

Metal platform decking

This course standard is in development and will be published shortly

Metal roof soldering introduction

The purpose of training delivered against this standard is to provide candidates with an introduction to soldering hard and soft metal roofs.

Metal roofing design introduction

The purpose of this standard is to provide an introduction to the basic design process and basic design specification of metal roofing systems.

Metal roofing fabrication of flashings

The purpose of this standard is to provide the candidate with knowledge and skills to fabricate and install flashings used on metal roofing systems.

Metal roofing maintenance

The purpose of this standard is to provide the knowledge for maintaining metal roofing systems, including routine inspections and identifying faults.

Metal roofing profiling

The purpose of this standard is to provide the candidate with knowledge and skills to make standing seam metal roofing trays using a machine.

Metal roofing setting out basic

The purpose of this standard is to provide the candidate with basic knowledge and skills for setting out of basic metal roofing systems on a steel structure for different types of metal sheet.

Metal roofing snagging

The purpose of training delivered against this standard is to provide candidates with an introduction to identifying defects in metal roofing systems.

Metalwork and identifying components in timber frame

The purpose of training delivered against this standard is to provide candidates with an introduction to metalwork used in timber frame construction.

Methods of attachment

The purpose of this standard is to provide the candidate with the knowledge and skills of how to attach single ply roofing using different methods.

MEWP competent assessed person

This training standard was previously held under the occupational area Powered access equipment. It is in development and will be published shortly

MEWP demonstrator

This training standard was previously held under the occupational area Powered access equipment. It is in development and will be published shortly

MEWP instructor

This training standard was previously held under the occupational area Powered access equipment. It is in development and will be published shortly

MEWP loading and unloading

This training standard was previously held under the occupational area Powered access equipment. It is in development and will be published shortly

MEWP manager

This training standard was previously held under the occupational area Powered access equipment. It is in development and will be published shortly

MEWP operator

This training standard was previously held under the occupational area Powered access equipment. It is in development and will be published shortly This standard includes previous standards: IPAF operator introduction, mobile elevated work platforms (MEWPS), the placing of net systems using MEWPS (mobile elevated work platforms)

MEWP operator PAL + 

This training standard was previously held under the occupational area Powered access equipment. It is in development and will be published shortly. This standard includes previous standard: IPAF operator advanced.

MEWP pre-delivery inspection

This training standard was previously held under the occupational area Powered access equipment. It is in development and will be published shortly

Milling machine familiarisation (road planer)

The purpose of this standard is to provide the candidate with the knowledge to become familiar with the milling machine controls and systems, but without driving or operating it. This is ideal for experienced drivers/operators/maintainers of milling machines who need to use a different brand or an updated milling machine.

Milling machine levelling systems

The purpose of this standard is to provide knowledge of the different levelling systems for milling machines.

Milling machine maintenance

The purpose of this standard is to provide knowledge on how to maintain milling machines.

Milling Machine Operator

The purpose of this standard is to cover the basic operation of milling machines.

Milling machine service engineer basic (road planer)

The purpose of this entry-level standard is to provide the candidate with knowledge and skills for basic maintenance of milling machines.

Mobile crane theory test

Full details of this standard will be published shortly.

Mobile crane: all duties practical test

Full details of this standard will be published shortly.

Mobile crane: all duties training

Full details for this standard will be published shortly

Mobile crane: blocked duties practical test

Full details of this standard will be published shortly.

Mobile crane: blocked duties training

Full details for this standard will be published shortly

Mobile crane: pick and carry duties only practical test

Full details of this standard will be published shortly.

Mobile crane: pick and carry duties only training

Full details for this standard will be published shortly

Mobile elevating work platform: boom theory test

Full details of this standard will be published shortly.

Mobile elevating work platform: boom, self-propelled practical test

Full details of this standard will be published shortly.

Mobile elevating work platform: boom, vehicle mounted practical test

Full details of this standard will be published shortly.

Mobile elevating work platform: boom: self-propelled training

Full details for this standard will be published shortly

Mobile elevating work platform: boom: vehicle mounted training

Full details for this standard will be published shortly

Mobile elevating work platform: mast climber practical test

Full details of this standard will be published shortly.

Mobile elevating work platform: mast climber theory test

Full details of this standard will be published shortly.

Mobile elevating work platform: mast climber training

Full details for this standard will be published shortly

Mobile elevating work platform: scissor practical test

Full details of this standard will be published shortly.

Mobile elevating work platform: scissor theory test

Full details of this standard will be published shortly.

Mobile elevating work platform: scissor training

Full details for this standard will be published shortly

Mobile plant loading and transporting - large equipment

The purpose of this standard is to provide candidates with the guidance on correct procedures for safe loading, securing and unloading of larger mobile plant found in hire.

Mobile plant loading and transporting - small equipment

The purpose of this standard is to provide candidates with the guidance on correct procedures for safe loading, securing and unloading of common mobile plant found in tool hire.

Modern mixing methods

This training standard is in development and will be published shortly

Modern site culture

The purpose of training against this standard is to inform candidates about recent developments in working practices and expectations on modern construction sites.

Moisture meter and thermal imaging training

This standard is in development and will be published shortly

Monitoring excavation in the road/highway - NRSWA Unit 1, Unit 10, Unit 11

This standard covers basic units of competence for supervisors in relation to the New Roads and Street Works Act 1991 (NRSWA).

Monitoring signing, lighting and guarding - NRSWA Unit 10

This standard covers one of the mandatory units of competence for supervisors in relation to the New Roads and Street Works Act 1991 (NRSWA).

Motorised scraper practical test

Full details of this standard will be published shortly.

Motorised scraper theory test

Full details of this standard will be published shortly.

Motorised scraper training

Full details for this standard will be published shortly

Movable partitioning installation

This training standard is in development and will be published shortly

Movement joints for tiling

The purpose of this standard is to provide the candidate with the knowledge and skills to select and install the correct type of movement joint for a given situation.

National water hygiene

The purpose of the standard is to provide training in line with the national water hygiene scheme. This training protects the safety of water through good hygiene practices while working on restricted operations as defined in the technical guidance notes. Water companies across the UK now mostly mandate the use of the National Water Hygiene card for anyone entering a clean water site or engaged in operations on the clean water network, whether in contact with the water or not.

Natural slating

The purpose of this standard is to provide the candidate with the knowledge and skills to install natural slates for a new roof.

Natural slating introduction

This training standard is in development and will be published shortly.

Near miss reporting for road marking operatives 

The purpose of this standard is to provide knowledge of how to report a near miss during road marking activities.

NEC3 - Compensation event procedure and assessment

This standard is in development and will be published shortly

NEC3 - Defined cost

This standard is in development and will be published shortly

NEC3 - formation and administration

This standard is in development and will be published shortly

NEC3 - option C

This standard is in development and will be published shortly

NEC3 - preparation and relevance of the contract data

This standard is in development and will be published shortly

NEC3 - timescales and failure to comply

This standard is in development and will be published shortly

NEC3 - works and site information

This standard is in development and will be published shortly

NEC3 contract introduction

The standard focuses on the common philosophies of the NEC family of contracts and main detail upon the key mechanics and provisions of the NEC3 Engineering and Construction Contract (ECC). 

NEC3: ECC project management

This standard is in development and will be published shortly.

NEC3: ECC Project Management

This standard is in development and will be published shortly.

NEC4 contract introduction

This course standard is in development and will be published shortly

Network construction operations gas (NCO 1)

This training standard is in development and will be published shortly.

Network construction up to 180mm diameter

This training standard is in development and will be published shortly

New roads and street works act operative

The purpose of this standard is to ensure that operatives are trained to a competent level to install, renew, maintain and inspect underground apparatus in any street or road.

New roads and street works act supervisor

The purpose of this standard is to ensure that supervisors are trained to a competent level to install, renew, maintain and inspect underground apparatus in any street or road.

New rules of measurement (NRM2)

This training standard is in development and will be published shortly

NHSS 10b foundation

This standard provides the basic knowledge for all potential VRS Labourers and Installers of Permanent Vehicle Restraint Systems before proceeding to detailed training for the installation of any of the Proprietary or Non-proprietary systems.

NHSS 10b installer

This standard provides the basic knowledge for VRS labourers and Installers of Permanent Vehicle Restraint Systems who have had 3 months on site work experience (supervised).

NHSS 12a foreman

This standard covers static temporary traffic management on motorways and high speed dual carriageways including on-line widening schemes and leads to 12a/b Foreman status.

NHSS 12a/b general operative

This standard provides the basic knowledge for 12A/B for static temporary traffic management on motorways and high speed dual carriageways including on-line widening schemes.

NHSS 12A/B Temporary Traffic Management Basic Course (TTMBC)

This training standard is in development and will be published shortly.

NHSS 12a/b traffic safety and control officer (TSCO)

The purpose of this standard is to cover 12a/b for static temporary traffic management on motorways and high speed dual carriageways including on-line widening schemes, to the level of Traffic Safety and Control Officer (TSCO).

NHSS 12b lead traffic management operative (LTMO)

The purpose of this standard is to cover 12A/B for static temporary traffic management on motorways and high speed dual carriageways including on-line widening schemes, to the level of Lead Traffic Management Operative.

NHSS 12c general operative training

The purpose of this standard is to cover 12C scheme for mobile lane closure (MLC) Traffic Management on motorways and other dual carriageways, to the level of a mobile lane closure operative (advance sign vehicle driver).

NHSS 12c supervisor

The purpose of this standard is to cover 12C scheme for mobile lane closure Traffic Management on motorways and other dual carriageways, to the level of a mobile lane closure Supervisor (Block vehicle driver).

NHSS 12c supervisor - refresher

The purpose of this standard is to provide a refresher on 12C scheme for mobile lane closure Traffic Management on motorways and other dual carriageways.

NHSS 12D M1 and M2 Mobile and Static Works on Single Carriageways Refresher

The purpose of this standard is to provide refresher information for NHSS 12D installing and removing temporary traffic management on rural and urban roads.

NHSS 12D M1 and M2 Mobile and Static Works on Single Carriageways

The purpose of this standard is to combine training for installing and removing temporary traffic management on rural and urban roads. In order to become a Registered Traffic Management Operative (RMTO) trainees need to complete first M1 then M2 and complete the T1 and T2 tests at the end of the course.

NHSS 12d m1 mobile works on single carriageways

The purpose of this standard is to cover 12D scheme for installing and removing temporary traffic management on rural and urban roads, for anyone working towards becoming a Registered Moving Works Operative (MWO) as described in the Sector Scheme Document 12D. This standard includes previous standard: Slurry surfacing traffic management and traffic management, SS 12d t1.

NHSS 12d m1 mobile works on single carriageways - refresher

The purpose of this standard is to provide a refresher on 12D scheme for installing and removing temporary traffic management on rural and urban roads.

NHSS 12D M2 Static Works on Single Carriageways

This standard is in development and will be published shortly

NHSS 12d m2 static works on single carriageways - refresher

The purpose of this standard is to cover 12D scheme for installing and removing temporary traffic management on rural and urban roads, to the level of Registered Traffic Management Operative (RTMO) as described in the Sector Scheme Document 12D. This standard also includes: Traffic management Sector Scheme 12d t2 (non fast track).

NHSS 12d m3 static works on low speed dual carriageways assessment - refresher

The purpose of this standard is to provide a refresher on 12D for installing and removing temporary traffic management on rural and urban roads.

NHSS 12d m3 static works on low speed dual carriageways assessment

The purpose of this standard is to cover the 12D scheme for installing and removing temporary traffic management on rural and urban roads, to the level of a registered 12D M3 Operative.

NHSS 12d m4 convoy working

The purpose of this standard is to cover the 12D scheme for installing and removing temporary traffic management on rural and urban roads, to the level of Registered Traffic Management Convoy Working Operatives as described in the Sector Scheme Document 12D.

NHSS 12D M5 Multi-Phase Traffic Signals

This training standard is in development and will be published shortly.

NHSS 12d m5 multi-phase traffic signals refresher

The purpose of this standard is to provide a refresher on 12D scheme for installing and removing temporary traffic management on rural and urban roads. This standard includes the previous standard: Traffic Management SS 12D T5.

NHSS 12d m6 registered lead traffic management operative (RLTMO)

The purpose of this standard is to cover 12D M6 scheme for installing and removing temporary traffic management on rural and urban roads, to the level of a Registered Lead Traffic Management Operative (RLTMO). This standard includes the previous standard: Technical officer Sector Scheme T6.

NHSS 12d m7 course for managers and client officers

The purpose of this standard is to cover 12D M7 scheme for all levels of management, client officers, technicians and anyone not actually installing temporary traffic management (TTM), but requiring a knowledge of basic practice of TTM on urban and rural roads. This standard includes the previous standard: Traffic management – technical officer, NHSS 12d t7.

NHSS impact protection vehicle  

The purpose of this standard is to cover 12A/B scheme for static temporary traffic management on motorways and high speed dual carriageways including on-line widening schemes. It is aimed at anyone who works on high speed roads, running mobile hard shoulder (or non-live lane) operations using an IPV and for protecting and installing static temporary traffic management.

NHSS impact protection vehicle refresher

The purpose of this standard is to provide a refresh on 12A/B scheme for static temporary traffic management on motorways and high speed dual carriageways including on-line widening schemes.

Non standard and special brick

The purpose of this training is to give an overview of the range of bricks outside of the standard set of dimensions, shapes and finishes. This training standard incorporates the standard for the Special bricks course.

Oak frame sector introduction

This standard provides a brief overview of the oak frame sector as a whole.

OLEC 1

This training standard is in development and will be published shortly

OLEC 2

This training standard is in development and will be published shortly

On track plant attachments

This training standard is in development and will be published shortly

On track plant operator advanced

This training standard is in development and will be published shortly

On track plant operator introduction

This training standard is in development and will be published shortly

On track plant tandem lifting

This training standard is in development and will be published shortly

Operate tools, plant and equipment

This training standard is in development and will be published shortly

Operation and maintenance manuals for roofing systems

The purpose of training delivered against this standard is to provide candidates with an introduction to creating and using O & M manuals.

Operative refresher assessment scheme (ORAS)

The purpose of this standard is to provide the candidate with the knowledge and skills to ensure the learner has contemporary knowledge and understanding of road marking operations as relates to level 2 pavement marking manual or road studs.

Operative Training Scheme (COTS)

This standard covers the training requirements for a new entrant into scaffolding to learn how to safely and correctly erect and dismantle both tube and fittings and system scaffold. This training standard was previously held under the occupational area Scaffolding.

Overhead travelling crane theory test

Full details of this standard will be published shortly.

Overhead travelling crane: fixed cab control practical test

Full details of this standard will be published shortly.

Overhead travelling crane: fixed cab control training

Full details for this standard will be published shortly

Overhead travelling crane: remote operated control practical test

Full details of this standard will be published shortly.

Overhead travelling crane: remote operated control training

Full details for this standard will be published shortly

Overview of roof sheeting and cladding

This training standard is in development and will be published shortly

Oxygen fuel cutting safety

The purpose of training delivered against this standard is to provide candidates with an understanding of the risks associated with Oxygen/Fuel cutting equipment and how to use it safely.

P6 rail planning

This training standard is in development and will be published shortly

Paint machines and cold applied paints appreciation

The purpose of this standard is to provide overview knowledge and practical skills in cold applied paint, including using a spray paint machine. This system is typically used in warehouses and car parks.

Painting traditional coatings to include ‘dead flat paints’

This training standard is in development and will be published shortly

Painting using airless spray equipment

This training standard is in development and will be published shortly

Painting using HVLP equipment

This training standard is in development and will be published shortly

Panel saw use in construction

This training standard is in development and will be published shortly

Panel soffit formwork for general operatives

This standard is to provide the skills / information required to erect and dismantle manhandled panel soffit formwork. This training would be relevant for concrete frame operatives, formworkers and supervisors.

Panel usage in timber frame erection

The purpose of training delivered against this standard is to provide candidates with an introduction to panel usage in timer frame construction.

Panel wall and column formwork for general operatives

This standard is designed to provide the skills / information required to erect and dismantle vertical formwork. This is to cover vertical formwork for typical building applications utilising standard proprietry formwork systems

Paperhanging intermediate

This training standard is in development and will be published shortly

Paperhanging introduction

This training standard is in development and will be published shortly

Party wall surveying

The objective of this standard is to ensure that practicing surveyors can demonstrate their knowledge and understanding of the Party Wall etc. Act 1996 and apply aspects of the Act in a range of circumstances.

PASMA linked towers for users

This standard ensures that operatives are trained in how to safely assemble, dismantle and relocate access towers without risk of personal injury to the self or others.

Passivhaus tradesperson course

This training standard is in development and will be published shortly

PCA qualified technician training (damp and timber)

The purpose of training delivered against this standard is to provide candidates with knowledge of damp and timber aspects of the building preservation industry.

PCA qualified technician training (structural waterproofing)

This training standard includes the standard for the Structural Waterproofing PCA Technicians Course.

Pedestrian applicator

The purpose of this standard is to provide the candidate with the knowledge and skills to safely set up and use the pedestrian applicator, to enable installing thermoplastic road markings.

Percussive drilling

This standard covers the training requirements for an operative to safely operate percussive drilling equipment.

Perimeter climbing access protection screens awareness

This training standard is in development and will be published shortly

Perimeter climbing access protection screens foreman

This training standard is in development and will be published shortly

Perimeter climbing access protection screens operator

This training standard is in development and will be published shortly

Personal fall protection equipment inspection

This training standard is in development and will be published shortly

Personal fall protection for users

This training standard is in development and will be published shortly

Personal fall protection system installation

This training standard is in development and will be published shortly

Personal track safety (PTS)

This training standard is in development and will be published shortly

Personal track safety (PTS) DCCR

This standard is in development and will be published shortly

Petrol retail contractors safety passport

This training standard is in development and will be published shortly

Piling rig attendant practical test

Full details of this standard will be published shortly.

Piling rig attendant theory test

Full details of this standard will be published shortly.

Piling rig attendant training

Full details for this standard will be published shortly

Piling rig: bored above 20 tonnes practical test

Full details of this standard will be published shortly.

Piling rig: bored above 20 tonnes theory test

Full details of this standard will be published shortly

Piling rig: bored above 20 tonnes training

Full details for this standard will be published shortly

Piling rig: bored below 20 tonnes practical test

Full details of this standard will be published shortly.

Piling rig: bored below 20 tonnes theory test

Full details of this standard will be published shortly

Piling rig: bored below 20 tonnes training

Full details for this standard will be published shortly

Piling rig: driven above 20 tonnes practical test

Full details of this standard will be published shortly.

Piling rig: driven above 20 tonnes theory test

Full details of this standard will be published shortly

Piling rig: driven above 20 tonnes training

Full details for this standard will be published shortly

Piling rig: driven below 20 tonnes practical test

Full details of this standard will be published shortly.

Piling rig: driven below 20 tonnes theory test

Full details of this standard will be published shortly

Piling rig: driven below 20 tonnes training

Full details for this standard will be published shortly

Piling rig: tripod practical test

Full details of this standard will be published shortly.

Piling rig: tripod theory test

Full details of this standard will be published shortly

Piling rig: tripod training

Full details for this standard will be published shortly

Plain tiling (including background materials and flashings)

This training standard is in development and will be published shortly.

Plain tiling introduction

The purpose of this standard is to provide the candidate with the knowledge and skills to install plain tiles for a new roof.

Planning and allocating demolition work

This training standard is in development and will be published shortly

Planning and estimating

The purpose of training delivered against this standard is to provide delegates with an introduction to estimating and planning for wooden floor installation.

Planning and programming in construction

The purpose of this standards is to provide a practical introduction to the concepts and practice of project management.

Planning lifts with excavators

The purpose of this standard is to give lifting operation teams a clear understanding of regulation and guidance available to them to safely plan and complete lifts using excavators.

Planning, setting up and managing small re-development site works

This training standard is in development and will be published shortly

Plans of work and risk assessments for asbestos removal operatives

The purpose of training delivered against this intermediate level standard is to provide candidates with the training content specified by the Health and Safety Executive (HSE) in the Control of Asbestos Regulations 2012 for operatives doing licensed work with asbestos.

Plant and vehicle marshaller practical test

Full details of this standard will be published shortly.

Plant and vehicle marshaller theory test

Full details of this standard will be published shortly

Plant and vehicle marshaller training

Full details for this standard will be published shortly

Plant driving theory test

Full details of this standard will be published shortly

Plant driving: loading and unloading ride on roller practical test

Full details of this standard will be published shortly.

Plant driving: loading and unloading ride on roller training

Full details for this standard will be published shortly

Plant driving: non operational ride on roller practical test

Full details of this standard will be published shortly.

Plant driving: non operational ride on roller training

Full details for this standard will be published shortly

Plant driving: tracked (blade/shovel) all sizes, loading and unloading training

Full details for this standard will be published shortly

Plant driving: tracked (blade/shovel) all sizes, non operational only training

Full details for this standard will be published shortly

Plant driving: tracked (blade/shovel) up to 20 tonnes, loading and unloading training

Full details for this standard will be published shortly

Plant driving: tracked (blade/shovel) up to 20 tonnes, non operational only training

Full details for this standard will be published shortly

Plant driving: tracked (blade/shovel): all sizes, non operational only practical test

Full details of this standard will be published shortly.

Plant driving: tracked (blade/shovel): all sizes, loading and unloading practical test

Full details of this standard will be published shortly.

Plant driving: tracked (blade/shovel): up to 20 tonnes, non operational only practical test

Full details of this standard will be published shortly.

Plant driving: tracked (blade/shovel): up to 20 tonnes, loading and unloading practical test

Full details of this standard will be published shortly.

Plant driving: tracked boom equipment all sizes, loading and unloading practical test

Full details of this standard will be published shortly.

Plant driving: tracked boom equipment all sizes, loading and unloading training

Full details for this standard will be published shortly

Plant driving: tracked boom equipment all sizes, non operational only practical test

Full details of this standard will be published shortly.

Plant driving: tracked boom equipment all sizes, non operational only training

Full details for this standard will be published shortly

Plant driving: tracked boom equipment up to 10 tonnes, non operational only training

Full details for this standard will be published shortly

Plant driving: tracked boom equipment up to 10 tonnes, non operational only practical test

Full details of this standard will be published shortly.

Plant driving: tracked boom equipment up to 10 tonnes, loading and unloading practical test

Full details of this standard will be published shortly.

Plant driving: tracked boom equipment up to 10 tonnes, loading and unloading training

Full details for this standard will be published shortly

Plant driving: tracked boom equipment up to 50 tonnes, loading and unloading practical test

Full details of this standard will be published shortly.

Plant driving: tracked boom equipment up to 50 tonnes, non operational only training

Full details for this standard will be published shortly

Plant driving: tracked boom equipment up to 50 tonnes, non operational only practical test

Full details of this standard will be published shortly.

Plant driving: tracked boom equipment up to 50 tonnes, loading and unloading training

Full details for this standard will be published shortly

Plant driving: wheeled articulated chassis all sizes, loading and unloading practical test

Full details of this standard will be published shortly.

Plant driving: wheeled articulated chassis all sizes, non operational only practical test

Full details of this standard will be published shortly.

Plant driving: wheeled articulated chassis all sizes, loading and unloading training

Full details for this standard will be published shortly

Plant driving: wheeled articulated chassis all sizes, non operational only training

Full details for this standard will be published shortly

Plant driving: wheeled articulated chassis up to 15 tonnes, non operational only practical test

Full details of this standard will be published shortly.

Plant driving: wheeled articulated chassis up to 15 tonnes, loading and unloading practical test

Full details of this standard will be published shortly.

Plant driving: wheeled articulated chassis up to 15 tonnes, non operational only training

Full details for this standard will be published shortly

Plant driving: wheeled articulated chassis up to 15 tonnes, loading and unloading training

Full details for this standard will be published shortly

Plant driving: wheeled rigid chassis all sizes, loading and unloading practical test

Full details of this standard will be published shortly.

Plant driving: wheeled rigid chassis all sizes, loading and unloading

Full details for this standard will be published shortly

Plant driving: wheeled rigid chassis all sizes, non operational only practical test

Full details of this standard will be published shortly.

Plant driving: wheeled rigid chassis all sizes, non operational only training

Full details for this standard will be published shortly

Plant driving: wheeled rigid chassis up to 15 tonnes, non operational only practical test

Full details of this standard will be published shortly.

Plant driving: wheeled rigid chassis up to 15 tonnes, non operational only training

Full details for this standard will be published shortly

Plant driving: wheeled rigid chassis up to 15 tonnes, loading and unloading practical test

Full details of this standard will be published shortly.

Plant driving: wheeled rigid chassis up to 15 tonnes, loading and unloading training

Full details for this standard will be published shortly

Plant maintenance 1 day advanced

This training standard is in development and will be published shortly.

Plant maintenance 1 day intermediate

This training standard is in development and will be published shortly.

Plant maintenance 1 day introduction

This training standard is in development and will be published shortly.

Plant maintenance 2 day advanced

This training standard is in development and will be published shortly.

Plant maintenance 2 day intermediate

This training standard is in development and will be published shortly.

Plant maintenance 2 day introduction

This training standard is in development and will be published shortly.

Plant maintenance 3 day advanced

This training standard is in development and will be published shortly.

Plant maintenance 3 day intermediate

This training standard is in development and will be published shortly.

Plant maintenance 3 day introduction

This training standard is in development and will be published shortly.

Plant maintenance 4 day advanced

This training standard is in development and will be published shortly.

Plant maintenance 4 day intermediate

This training standard is in development and will be published shortly.

Plant maintenance 4 day introduction

This training standard is in development and will be published shortly.

Plant operator scheme (POS) representative

This training standard is in development and will be published shortly

Plant testing and inspection

This training standard is in development and will be published shortly

Plaster skim finish and basic trowel skills

This training standard is in development and will be published shortly

Platform decking for managers

This training standard is in development and will be published shortly.

Pointing and jointing advanced

The purpose of this standard is to provide the candidate with the knowledge and skills to point and joint for façade preservation work.

Pointing and jointing introduction

The purpose of this standard is to provide the candidate with the knowledge and skills to point and joint for façade preservation work.

Points operator

This training standard is in development and will be published shortly

Polymethyl methacrylates (acrylic glass)

The purpose of this standard is to provide the candidate with the knowledge to apply polymethyl methacrylates (acrylic glass) to a roof.

Positioning and securing fibrous plaster components

This training standard is in development and will be published shortly

Post-fired cut and rubbed and gauged brickwork

The standard is in development and will be published shortly.

Post-tensioning for supervisors

This standard covers the training needed to supervise post-tensioning operations.

Post-tensioning theory and practice

The purpose of this standard is to train the theory and practice of installation of post-tensioning materials and techniques of pre-stressing by post-tensioning.

Post-tensioning theory and practice refresher

The purpose of this standard is to refresh and update Post-Tensioning practitioners in the theory and practice of installation of post-tensioning materials and techniques of pre-stressing by post-tensioning. The training would cover changes within the sector since completing the Post-tensioning Theory and Practice training.

Power Networks - 11kv Cable Jointing

This standard is held by the Energy & Utility Skills Register

Power Networks - 66kv Cable Jointing

This standard is held by the Energy & Utility Skills Register

Power Networks - Access, Movement & Egress (BESC/AME) Underground Cables

This standard is held by the Energy & Utility Skills Register

Power Networks - Access, Movement & Egress (BESC/AME) Overhead Lines

This standard is held by the Energy & Utility Skills Register

Power Networks - Cable Diagnostic & Fault Finding

This standard is held by the Energy & Utility Skills Register

Power Networks - Cable Jointers Mate

This standard is held by the Energy & Utility Skills Register

Power Networks - High Voltage Network Protection

This standard is held by the Energy & Utility Skills Register

Power Networks - High Voltage Switching Overhead Networks

This standard is held by the Energy & Utility Skills Register

Power Networks - Installation of wood poles and stays

This standard is held by the Energy & Utility Skills Register

Power Networks - Installing Steel Tower Insulators

This standard is held by the Energy & Utility Skills Register

Power Networks - Live Low Voltage Overhead Lines

This standard is held by the Energy & Utility Skills Register

Power Networks - Low Voltage Cable Jointing (mains to mains - plastic only)

This standard is held by the Energy & Utility Skills Register

Power Networks - Low Voltage Cable Jointing (mains to mains)

This standard is held by the Energy & Utility Skills Register

Power Networks - Low Voltage Cable Jointing (service to mains)

This standard is held by the Energy & Utility Skills Register

Power Networks - Low Voltage Cable Jointing (service to mains - plastic only)

This standard is held by the Energy & Utility Skills Register

Power Networks - Low Voltage Cut Out (remove, test, insert)

This standard is held by the Energy & Utility Skills Register

Power networks - Low voltage switching (over head lines)

This standard is held by the Energy & Utility Skills Register

Power Networks - Low Voltage Switching (underground cables)

This standard is held by the Energy & Utility Skills Register

Power Networks - Pilot Cable Jointing

This standard is held by the Energy & Utility Skills Register

Power Networks - Power Regulation Awareness

This standard is held by the Energy & Utility Skills Register

Power Networks - Steel Tower Conductor Jointing

This standard is held by the Energy & Utility Skills Register

Power Networks - Steel Tower Conductor Stringing

This standard is held by the Energy & Utility Skills Register

Power Networks - Steel Tower Earthing

This standard is held by the Energy & Utility Skills Register

Power Networks - Steel Tower Fittings

This standard is held by the Energy & Utility Skills Register

Power Networks - Wood Pole Access

This standard is held by the Energy & Utility Skills Register

Power networks - wood pole conductor jointing

This standard is held by the Energy & Utility Skills Register

Power Networks - Wood Pole Conductor Stringing

This standard is held by the Energy & Utility Skills Register

Power networks - wood pole earthing

This standard is held by the Energy & Utility Skills Register

Power Networks - Wood Pole Install Plant / Apparatus Earthing

This standard is held by the Energy & Utility Skills Register

Power Networks - Wood Pole Low Voltage Services

This standard is held by the Energy & Utility Skills Register

Power Networks - Wood Pole Steel work

This standard is held by the Energy & Utility Skills Register

Powerfloat operator

This training standard is in development and will be published shortly

Pre-purchase chimney and appliance inspection

The purpose of this standard is to provide the candidate with the knowledge to perform a pre-purchase inspection of flues and chimneys.

Preformed, temporary markings & surface mounted studs

The purpose of this standard is to provide overview knowledge of installing preformed cold thermoplastic road markings on rolls or symbols/logos. Typically for school playgrounds, factories, car parks, and increasingly on public highways.

Preparation and use of mortar

This training standard is in development and will be published shortly.

Preparation of flat roofs

The purpose of this standard is to provide the candidate with the knowledge and skills to prepare flat roofs for coating using a liquid roofing system.

Preparation of roof decking or existing roof

The purpose of this standard is to provide the candidate with the knowledge to prepare a roof deck substrate for installation of a single ply roof. This standard includes the previous standard Roofing systems removal.

Prepare and install gas membranes

This training standard is in development and will be published shortly

Prepare background surfaces to receive screed flooring


Prepare backgrounds to receive resin flooring

This training standard is in development and will be published shortly

Prepare for and apply concrete

This training standard is in development and will be published shortly

Prepare roof for re-slating

The standard is in development and will be published shortly.

Prepare roof for re-tiling

The standard is in development and will be published shortly.

Prepare structure joints and apply primary waterproofing

This training standard is in development and will be published shortly

Prepare surfaces for structural waterproofing

This training standard is in development and will be published shortly

Preparing foundations for timber frame soleplating

The purpose of training delivered against this standard is to provide candidates with an introduction to foundation preparation prior to installing soleplates for timber frame construction.

Preparing materials and equipment

This training standard is in development and will be published shortly

Preparing roofing materials equipment

The purpose of training delivered against this standard is to provide candidates with an introduction to preparing roofing materials and equipment on a site.

Preparing timber frame for delivery and storage

The purpose of training delivered against this standard is to provide candidates with an introduction to preparing for the delivery and storage of timber frame materials and components.

Producing cement castings

This training standard is in development and will be published shortly

Producing complex plasterwork moulds

This training standard is in development and will be published shortly

Producing complex render finishes

This training standard is in development and will be published shortly

Producing external render finishes

This training standard is in development and will be published shortly

Producing fibrous plaster components

This training standard is in development and will be published shortly

Producing granolithic works

This training standard is in development and will be published shortly

Producing internal solid finishes

This training standard is in development and will be published shortly

Producing specialist plastering finishes

This training standard is in development and will be published shortly

Production and use of multi-plate stencils

This training standard is in development and will be published shortly

Programmes under NEC3

This standard is in development and will be published shortly

Project management in construction intermediate

This training standard is in development and will be published shortly

Project Management in Construction Introduction

The purpose of this standard is to provide entry-level introduction to construction project management which will introduce basic concepts and practices and signpost possible directions for further development.

Project planning and preparation

The purpose of this standard is to provide the candidate with the knowledge of project planning and preparation.

Property flood resilience surveying

The purpose of this standard is to provide candidates with the knowledge to assess the risk of flooding, and to develop strategies to provide flood resistance and resilience by adapting construction methods or carrying out alterations in existing buildings.

Protection controller

This training standard is in development and will be published shortly

Provision of service penetrations

This standard is in development and will be published shortly

Provision of service penetrations, forming of control joint details

This training standard is in development and will be published shortly

Push around Vehicle (PAV)

This standard is in development and will be published shortly

Push-a-long floor saw

This standard covers the training requirements for an operative to safely use a push-a-long floor saw.

Quality assurance and customer/client handover

The purpose of training against this standard is to give candidates an overview of the different systems and requirements in place to control the quality of work and the handover process to the client.

Quality standards

This training standard is in development and will be published shortly.

Quick hitch coupler safety

The purpose of training delivered against this standard is to provide candidates with an understanding of the risks associated with quick-hitch couplers and how to use them safely.

Rail drill operation

This training standard is in development and will be published shortly

Rainscreen cladding installation

This training standard is in development and will be published shortly

Rainscreen cladding systems introduction

This training standard is in development and will be published shortly

Reach truck practical test

Full details of this standard will be published shortly.

Reach truck theory test

Full details of this standard will be published shortly

Reach truck training

Full details for this standard will be published shortly

Recoating roofs of metal, asbestos, and fibre-cement

The purpose of this standard is to provide the candidate with the knowledge and skills to prepare roofs of metal, asbestos, and fibre-cement; in order to recoat them using a liquid roofing system.

Recording historic roofs

The standard is in development and will be published shortly.

Recycling and re-use of materials

The purpose of this standard is to provide the candidate with knowledge to identify, remove, and prepare materials (if needed) for re-use (soft-removal).

Refurbishment of existing cladding systems

This training standard is in development and will be published shortly

Reinforced concrete for engineers and supervisors

This standard aims to provide learners including engineers’ foreman, supervisors, gangers and graduates with knowledge and understanding of inspecting, pouring and testing of products relating to steel reinforcement, formwork and poured concrete.

Reinforcement in underpinning, piles, beams and basements

The purpose of this standard is to give candidates the knowledge and understanding of reinforcement in underpinning, piles, beams and basements.

Relaying heritage roof slates

The standard is in development and will be published shortly.

Relaying heritage roof tiles

The standard is in development and will be published shortly.

Remote controlled plant for crushing and breaking working task

This standard covers the training requirements for an operative to carry out a working task using remote controlled plant equipment.

Remote controlled plant for crushing and breaking preparing for work

This standard covers the training requirements for an operative to prepare for work using remote controlled plant equipment.

Remote controlled plant for crushing and breaking characteristics and types

This standard covers the training requirements for an operative to safely operate remote controlled plant equipment for crushing and breaking.

Remote controlled wacker operation

This training standard is in development and will be published shortly

Removing cladding systems

This training standard is in development and will be published shortly

Repair and maintenance

This training standard is in development and will be published shortly.

Repair and maintenance of chimneys on heritage structures

The purpose of this standard is to provide the candidate with knowledge and skills to repair and reinstate chimneys and flues for heritage buildings.

Repair and maintenance of chimneys on thatched structures

The purpose of this standard is to provide the candidate with knowledge and skills to assess chimneys for safety and compliance on thatched structures, and to repair and maintain them.

Repair and maintenance of heritage structures 

The purpose of this standard is to provide the candidate with knowledge of how to repair and reinstate chimneys and flues for heritage buildings.

Repair and maintenance of traditional pre-1919 buildings

This standard was previously held under the occupational area Painting and decorating. It is in development and will be published shortly

Repair of old buildings

This training standard is in development and will be published shortly.

Repair of storm damage to roofs

This training standard is in development and will be published shortly.

Repairing cladding systems

This training standard is in development and will be published shortly

Repairing complex decorative fibrous plaster components

This training standard is in development and will be published shortly

Repairing cut and rubbed and gauged brickwork

The standard is in development and will be published shortly.

Repairing defective brick and block work

The purpose of training against this standard is to give candidates an overview of the different systems and requirements in place to control the quality of work and the handover process to the client.

Repairing heritage roof slates and tiles

This short duration training standard includes the training standards for the Re-lay Tile Coverings Upskilling and Installation of Natural Slates (Including Background Materials and Flashings) courses. It is in development and will be published shortly.

Repairs and alterations of dry lining systems

This standard is in development and will be published shortly

Repairs and alterations of laying grid system and various types of ceiling tiles

This standard is in development and will be published shortly

Repairs and alterations, roof and floor assembly

This training standard is in development and will be published shortly

Replacing heritage roof coverings

The standard is in development and will be published shortly.

Replica graining

This training standard is in development and will be published shortly

Rescue from height in construction

This training standard was previously held under the occupational area Steeplejack and lightning protection. It is in development and will be published shortly

Resilient polyesters

The purpose of this standard is to provide the candidate with the knowledge and skills to prepare roofs of metal, asbestos, and fibre-cement; in order to recoat them using a liquid roofing system.

Resin coatings

This training standard is in development and will be published shortly

Resin flooring and equipment introduction

This training standard is in development and will be published shortly

Resin screeds and coving

This training standard is in development and will be published shortly

Resin self smoothing systems

This training standard is in development and will be published shortly

Respiratory equipment in construction

This training standard is in development and will be published shortly

Restoration of timber framed structures

This training standard is in development and will be published shortly

Retrofit for older and traditional buildings

This standard covers knowledge of factors that influence traditional pre-1919 buildings.

Retrofit insulation masterclass

The purpose of training delivered against this standard is to provide candidates with the knowledge to assess the need and specify insulation for existing buildings.

Retrofit of pre-1919 traditional buildings

This course standard is being withdrawn on 27/03/2019 as it is not eligible for a grant

Ride on roller practical test

Full details of this standard will be published shortly.

Ride on roller theory test

Full details of this standard will be published shortly

Ride on roller training

Full details for this standard will be published shortly

Rig based diamond drilling

This standard covers the training requirements for an operative to correctly and safely operate rig based diamond drilling equipment on the job.

Rigid chimney structures

The purpose of this standard is to provide the candidate with knowledge to determine the mechanical and atmospheric basis for installing a rigid chimney system.

Ring sawing

This standard covers the training requirements for an operative in ring sawing activities.

Road construction for home build programmes

The purpose of training delivered against this standard is to provide candidates with an introduction to the requirements associated with road construction as part of a managing a site build programme.

Road rail vehicle introduction

This training standard is in development and will be published shortly

Road sweeper/suction unit operator

The purpose of this standard is to provide learners with knowledge of sweeper maintenance, health and safety, and necessary pre, during and post use checks.

Robotic total station training

The purpose of this standard to enable candidates to learn how to use a Robotic Total Station. The content is relevant to all types of construction including earthworks, roads, houses, buildings, foundations, piles, structural steel, structures and reinforced concrete.

Roof conservation and restoration

The standard is in development and will be published shortly.

Roof felt products and application

The purpose of this standard is to provide the candidate with the knowledge and skills to apply silicane terminated polyethers to a roof.

Roof loading and manual handling

The purpose of this standard is to provide the candidate with the knowledge and skills to safely load a roof during setting out and installing a slated and/or tiled pitched roof.

Roof structures terminology and types

The purpose of this standard is to provide the candidate with the knowledge of types of roof structures and roofing terminology.

Roof surveys for repairs, renewal or refurbishment

The purpose of training delivered against this standard is to provide candidates with the knowledge and skills to perform a roof survey prior to repair, renewal or refurbishment.

Roofing and cladding systems installation

This training standard is in development and will be published shortly.

Roofing estimating

This training standard is in development and will be published shortly.

Roofing liability when working on and to chimney structures

The purpose of this standard is to provide the candidate with knowledge of roofing liability when working on and to chimney structures.

Rooflights, maintenance and waterproofing

The purpose of this standard is to provide the candidate with the knowledge and skills to install new or replacement rooflights and translucent sheets to liquid roofing systems, including maintenance.

Rooftop Safety Training

This standard is in development and will be published shortly

Rope access systems for construction

This training standard was previously held under the occupational area Steeplejack and lightning protection. It is in development and will be published shortly

Rope access technician level 1

This training standard was previously held under the occupational area Rope access. It is in development and will be published shortly

Rope access technician level 2

This training standard was previously held under the occupational area Rope access. It is in development and will be published shortly

Rope access technician level 3

This training standard was previously held under the occupational area Rope access. It is in development and will be published shortly

Rough terrain masted forklift practical test

Full details of this standard will be published shortly.

Rough terrain masted forklift theory test

Full details of this standard will be published shortly

Rough terrain masted forklift training

Full details for this standard will be published shortly

Running in-situ mouldings

This training standard is in development and will be published shortly

Safe control of gas network pipeline operations authorising non routine operations (SCO4)

This is one of the standards held by the Energy & Utility Skills Register

Safe control of gas network pipeline operations authorising routine operations (SCO5)

This is one of the standards held by the Energy & Utility Skills Register

Safe control of gas network pipeline operations competent persons (SCO1 and 2)

This is one of the standards held by the Energy & Utility Skills Register

Safe Control of Mains Connections (SCMC) - water

The standard provides all the individuals involved in making mains connections, the knowledge and understanding of both their own roles and responsibilities, and those of others, when carrying out work. The standard is held by the Energy and Utility Skills Register (EUSR).

Safe earth testing in construction

This training standard was previously held under the occupational area Steeplejack and lightning protection. It is in development and will be published shortly

Safe earth testing in construction renewal

This training standard was previously held under the occupational area Steeplejack and lightning protection. It is in development and will be published shortly

Safe system of work planner initial

This training standard is in development and will be published shortly

Safe use of woodworking machinery

This training standard is in development and will be published shortly

Safe work leader 1 conversion

This training standard is in development and will be published shortly

Safe work leader 2 conversion

This training standard is in development and will be published shortly

Safe work manager

This training standard is in development and will be published shortly

Safe working practices

This training standard is in development and will be published shortly

Safe working practices around construction plant

The purpose of this standard is to give candidates who work in close proximity to mobile construction plant machinery an understanding of how to work safely around construction plant and machinery. This includes earthmoving and lifting appliances commonly found on construction sites and incorporates excavation awareness and traffic/vehicle movements within site activities.

Safety harness use

This training standard is in development and will be published shortly

Safety net rigger installation in construction

This training standard is in development and will be published shortly.

Safety nets for managers in construction

This standard includes the previous standard Temporary net works supervisor. This training standard is in development and will be published shortly.

Sanding

The purpose of training delivered against this standard is to provide delegates with an introduction to the sanding of wooden floors using approved methods in commercial and domestic environments.

Scaffolder/Advanced Scaffolder Refresher 

This standard covers the training requirements for an operative to maintain and refresh their skills and knowledge to correctly and safely erect and dismantle different types of scaffold. This training standard was previously held under the occupational area Scaffolding.

Scaffolding Awareness

This standard covers the foundation knowledge needed for an entrant into scaffolding. This training standard was previously held under the occupational area Scaffolding.

Scaffolding inspection training scheme (BSITS)

This standard covers the training requirements for individuals who are responsible for carrying out statutory scaffold inspections on basic scaffolding structures in accordance with the Work at Height Regulations 2005. This training standard was previously held under the occupational area Scaffolding.

Scaffolding part 1: System scaffolder

This training standard covers the structured training requirements for an operative to safely and correctly erect and dismantle system scaffold products in accordance to manufacturers instructions. This training standard was previously held under the occupational area Scaffolding.

Scaffolding part 1: Tube and fitting

This standard covers the training requirements for an operative, as a member of a team, to erect, alter and dismantle tube and fitting scaffold structures safely and in their correct sequence. This training standard was previously held under the occupational area Scaffolding.

Scaffolding part 2: System scaffolder

This standard covers the training requirements for an operative to be able, as a member of a team, to correctly interpret scaffold drawings. The operative should also be able to erect, alter and dismantle the system scaffolds safely and in their correct sequence according to manufacturers' instructions. This training standard was previously held under the occupational area Scaffolding.

Scaffolding part 2: Tube and fitting

This standard covers the training requirements for an operative to be able to interpret scaffold drawings. The operative should also be able, as a member of a team, to erect, alter and dismantle the scaffolds safely and in their correct sequence. This training standard was previously held under the occupational area Scaffolding.

Scaffolding supervisor and management course

This training standard is in development and will be published shortly. This training standard was previously held under the occupational area Scaffolding.

Scaffolding Supervisor/Manager Refresher

This standard covers the training requirements for a scaffolding supervisor or manager to maintain and refresh their skills and knowledge in the different types of scaffolds. This training standard was previously held under the occupational area Scaffolding.

Screed flooring and equipment introduction

This training standard is in development and will be published shortly

Screener practical test

Full details of this standard will be published shortly.

Screener theory test

Full details of this standard will be published shortly

Screener training

Full details for this standard will be published shortly

Scribing timbers for structural timber frames

This intermediate level standard provides the learner with the information and skills to accurately scribe the timbers for a simple oak frame structure.

Secant piled wall using segmental casing

The purpose of this standard is to provide the candidate with details of why and how segmental casing is used in the construction of secant piled walls. This standard was previously called Using segmental casing, extractors and ocsillators for secant piled wall construction.

Selecting, converting and grading timber

This training standard is in development and will be published shortly

Selecting, converting and using timber

This intermediate level standard provides the learner with the information and skills to select and convert timber appropriately for a simple oak frame structure.

Selection of appropriate mortars

This training standard is in development and will be published shortly

Set out secondary dimensional work control

This training standard is in development and will be published shortly

Setting out and constructing metal stud partitions and openings

This training standard is in development and will be published shortly.

Setting out and erecting complex stonemasonry structures

The standard is in development and will be published shortly.

Setting out and fixing systems

This training standard is in development and will be published shortly

Setting out complicated shapes and details for roofing

The purpose of this standard is to provide the candidate with the knowledge and skills to set out complicated shapes and details.

Setting out for structural timber frames

This intermediate level standard provides the learner with the information and skills too accurately and safely lay-up timbers for a simple oak frame timber structure.

Setting out of systems using traditional and modern instruments

This standard is in development and will be published shortly

Setting out stone

This training standard is in development and will be published shortly.

Setting out terracotta, laminated and fibre cement systems

This training standard is in development and will be published shortly

Setting up for asbestos removal

This standard covers the additional knowledge and skills to support trainees' development towards their Level 2 NVQ Diploma in Removal of Hazardous Waste (Licensed Asbestos).

Shaftwall systems installer

This training standard is in development and will be published shortly

SHEA core

This is one of the standards held by the Energy & Utility Skills Register

SHEA cross-country pipelines

This is one of the standards held by the Energy & Utility Skills Register

SHEA Gas

This is one of the standards held by the Energy & Utility Skills Register

SHEA Power

This standard is held by the Energy & Utility Skills Register

SHEA Waste

This is one of the standards held by the Energy & Utility Skills Register

SHEA Water

This is one of the standards held by the Energy & Utility Skills Register

Sheet weathering maintenance

This training standard is in development and will be published shortly.

Shingles

The purpose of this standard is to provide the candidate with the knowledge and skills to install wooden shingles.

Short term planning

This training standard is in development and will be published shortly

Shotblasting

This training standard is in development and will be published shortly

Signing, lighting and guarding - NRSWA Unit 2

This standard covers one of the standalone units of competence for trained operatives in relation to the New Roads and Street Works Act 1991 (NRSWA).

Silicane terminated polyethers

The purpose of this standard is to provide the candidate with the knowledge and skills to apply silicane terminated polyethers to a roof.

Sills, copings, cappings and junctions

The purpose of training against this standard is to give an overview of sills, copings, cappings and junctions in masonry construction.

Silt buster operation

This training standard is in development and will be published shortly

Simple wood effects introduction

This training standard is in development and will be published shortly

Single pack polyurethanes

The purpose of this standard is to provide the candidate with the knowledge and skills to apply single pack polyurethanes to a roof.

Single ply roofing advanced

The purpose of this standard is to provide the candidate with advanced knowledge and skills in single ply roofing.

Single ply roofing introduction

The purpose of this standard is to provide the candidate with introductory knowledge of single ply roofing.

Single skin sheets and composite material

This training standard is in development and will be published shortly

Site erection of structural timber frames

This intermediate level standard provides the learner with the information and skills to safely erect a simple oak frame structure.

Site management

This training standard is in development and will be published shortly

Site protection

The standard is in development and will be published shortly.

Site sustainability manager (BREEAM)

This training standard is in development and will be published shortly

Skid steer loader practical test

Full details of this standard will be published shortly.

Skid steer loader theory test

Full details of this standard will be published shortly

Skid steer loader training

Full details for this standard will be published shortly

Skip handler practical test

Full details of this standard will be published shortly.

Skip handler theory test

Full details of this standard will be published shortly

Skip handler training

Full details for this standard will be published shortly

Slinger/signaller in construction training

Full details of this standard will be published shortly

Slinger/signaller in rail construction

This training standard is in development and will be published shortly

Slinger/signaller: all types, all duties practical test

Full details of this standard will be published shortly.

Slinger/signaller: all types, all duties training

Full details for this standard will be published shortly

Slinger/signaller: all types, static duties practical test

Full details for this standard will be published shortly

Slinger/signaller: all types, static duties training

Full details for this standard will be published shortly

Slinger/signaller: excavator only practical test

Full details of this standard will be published shortly.

Slinger/signaller: excavator only training

Full details for this standard will be published shortly

Slinger/signaller: knuckle boom, static duties only practical test

Full details of this standard will be published shortly.

Slinger/signaller: knuckle boom, static duties only training

Full details for this standard will be published shortly

Slinger/signaller: lift truck only practical test

Full details of this standard will be published shortly.

Slinger/signaller: lift truck only training

Full details for this standard will be published shortly

Slinger/signaller: theory test

Full details of this standard will be published shortly

Slinging for cladding systems

This training standard is in development and will be published shortly

Slurry micro surfacing introduction 

This training standard is in development and will be published shortly

Slurry micro surfacing operator

This training standard is in development and will be published shortly

Small tools and small plant for rail

This standard is in development and will be published shortly.

Soft landing system installation

This training standard is in development and will be published shortly

Soft landing systems for managers

This training standard is in development and will be published shortly

Soil stabiliser theory test

Full details of this standard will be published shortly

Soil stabiliser: self propelled practical test

Full details of this standard will be published shortly.

Soil stabiliser: self propelled training

Full details for this standard will be published shortly

Soil stabiliser: spreader self-propelled practical test

Full details of this standard will be published shortly.

Soil stabiliser: spreader self-propelled training

Full details for this standard will be published shortly

Soil stabiliser: towed practical test

Full details of this standard will be published shortly.

Soil stabiliser: towed training

Full details for this standard will be published shortly

Soil/landfill compactor practical test

Full details of this standard will be published shortly.

Soil/landfill compactor theory test

Full details of this standard will be published shortly

Soil/landfill compactor training

Full details for this standard will be published shortly

Solid plastered surface production

The standard is in development and will be published shortly.

Solid plastered surfaces conservation

The standard is in development and will be published shortly.

Solid surface material for kitchens and bathrooms

This training standard is in development and will be published shortly

Specialist damp proof course cloak systems

The purpose of this standard is to provide the candidate with knowledge and understanding of specialist cloak systems and where and when they are used in the construction process of a building. This course standard includes Weep hole positioning standard.

Specialist drying training

This standard is in development and will be published shortly

Specialist plant maintenance for drilling and sawing

This standard covers the training requirements for specialist plant maintenance for drilling and sawing.

Specialist safety net rigger in construction

This training standard is in development and will be published shortly.

Specialist safety net rigger manager in construction

This training standard is in development and will be published shortly

Specialist techniques

The standard is in development and will be published shortly.

Specialist techniques for heritage wood occupations

This training module, ‘Specialist techniques for heritage wood occupations’ is intended to focus on the trainee being able to use technical information and resources to draw, set out and pass on information that is clear and concise.

Specifying and selecting resin flooring

This training standard is in development and will be published shortly

Specifying concrete and receiving onsite

The purpose of this standard is to provide candidates with the understanding needed for specifying concrete and receiving concrete onsite.

Sports flooring and court marking

The purpose of training delivered against this standard is to provide delegates with an introduction to installation and marking of sports flooring using approved methods in commercial environments.

Spray injection patching

This training standard is in development and will be published shortly

Stair tower and edge protection for managers

This training standard is in development and will be published shortly

Stair tower installation

This training standard is in development and will be published shortly

Standing seam roofing

The purpose of training delivered against this standard is to provide candidates with an introduction to Standing Seam Roofing systems.

Static concrete placing boom practical test

Full details of this standard will be published shortly.

Static concrete placing boom theory test

Full details of this standard will be published shortly

Static concrete placing boom: all sizes training

Full details for this standard will be published shortly

Static concrete placing boom: up to 13 meters training

Full details for this standard will be published shortly

Static dissipative and slip resistant systems

This training standard is in development and will be published shortly

Steelfixing introduction

The purpose of training delivery against this standard is to provide candidates with knowledge and understanding of Steelfixing.

Stilt safety training

This standard is in development and will be published shortly

Stone and brick repair

The purpose of this standard is to provide the candidate with the knowledge and skills to repair stonework and brickwork for façade preservation.

Stonework conservation, repair and maintenance

The standard is in development and will be published shortly.

Streetworks coordinator

The purpose of this standard is to provide technical assessment in the functions of streetworks which adheres to the implementation of the Traffic Management Act.

Stressing kit configuration

This training standard is in development and will be published shortly

Strip and plank installation

The purpose of training delivered against this standard is to provide delegates with an introduction to the installation of strip and plank wooden floors using approved methods in commercial and domestic environments.

Stripping existing roof slating and tiling coverings

The standard is in development and will be published shortly.

Stripping out of structural materials

This standard is in development and will be published shortly

Structural implications of waterproofing

The purpose of training delivered against this standard is to broaden knowledge and explore the potential effects of waterproofing systems on the structure of buildings.

Structural masonry chimney build and design

The purpose of this standard is to provide the candidate with the knowledge relating to the design and build of a new chimney and flue.

Structural masonry chimney refurbishment and reinstatement

The purpose of this standard is to provide the candidate with knowledge to refurbish and reinstate an existing masonry chimney. This training standard includes Chimney structure and flue lining (cast in situ concrete lining system).

Structural waterproofing update

The purpose of training delivered against this standard is to provide candidates with knowledge of the updated BS 8102:2009 code of practice for protection of below ground structures against water from the ground.

Subfloor preparation for textile and impervious flooring (commercial)

The purpose of training delivered against this standard is to provide delegates with an introduction to the technical aspects of subfloor preparation using approved methods in commercial environments.

Subfloor preparation for textile and impervious flooring (domestic)

The purpose of training delivered against this standard is to provide delegates with an introduction to the technical aspects of subfloor preparation using approved methods in domestic environments.

Subfloor preparation for wooden floors

The purpose of training delivered against this standard is to provide delegates with an introduction to the technical aspects of subfloor preparation using approved methods. This standard includes the previous standard Preparation of substrate for wooden floors.

Substrates

The purpose of this standard is to provide the candidate with the knowledge to identify substrates and how to handle substrate faults in façade preservation.

Substrates and mortars

The purpose of this standard is to provide the candidate with the knowledge and skills to identify substrates and faults, and how to apply masonry repairs and reinforcements to façades.

Supervision of concrete pumping operations

The purpose of this standard is to provide the knowledge and skills applicable to supervise and control concrete pumping operations and manage the associated risks.

Surface coating removal using DCM and solvents

This training standard is in development and will be published shortly

Surface finishes applied to internal wall insulation systems

This training standard is in development and will be published shortly.

Surface grinding

This training standard is in development and will be published shortly

Surface multi-stripping

This training standard is in development and will be published shortly

Surface planing

This training standard is in development and will be published shortly.

Surface polishing

This training standard is in development and will be published shortly.

Surface preparation and equipment introduction

This training standard is in development and will be published shortly

Surface preparation for external wall insulation

This training standard is in development and will be published shortly.

Surface preparation introduction

This training standard is in development and will be published shortly.

Surveying and setting out intermediate

This training standard is in development and will be published shortly

Surveying timber and dampness in buildings

The purpose of training delivered against this standard is to provide candidates with the knowledge to identify, resolve and report problems relating to dampness and/or timber infestation/decay in buildings.

Surveyor in structural waterproofing 

The purpose of training delivered against this standard is to provide candidates with knowledge to install new basements and convert existing basements, including: design, planning, and installation of structural waterproofing projects below ground.

Suspended access equipment cradle inspection and test

This training standard was previously held under the occupational area Rope access. It is in development and will be published shortly

Suspended access equipment cradle installation

This training standard was previously held under the occupational area Rope access. It is in development and will be published shortly

Suspended access equipment cradle user

This training standard was previously held under the occupational area Rope access. It is in development and will be published shortly

System Scaffolding Product Inspection

This standard covers the training requirements for an operative to be able to safely and correctly inspect system scaffolds in accordance to manufacturers' instructions. This training standard was previously held under the occupational area Scaffolding.

Systems Scaffolding Product Training Scheme (SSPTS)

This standard covers the skills and knowledge for the safe use of the system scaffold product, in accordance with the manufacturer’s instructions. This training standard was previously held under the occupational area Scaffolding.

Take control vehicle marshalling in construction

This training standard is in development and will be published shortly

Tapered insulation systems

The purpose of this standard is to provide the candidate with the knowledge to install tapered insulation systems.

Telescopic handler theory test

Full details of this standard will be published shortly

Telescopic handler: all sizes excluding 360 slew practical test

Full details of this standard will be published shortly.

Telescopic handler: all sizes excluding 360 slew training

Full details for this standard will be published shortly

Telescopic handler: all sizes including 360 slew practical test

Full details of this standard will be published shortly.

Telescopic handler: all sizes including 360 slew training

Full details for this standard will be published shortly

Telescopic handler: industrial telescope practical test

Full details of this standard will be published shortly.

Telescopic handler: industrial telescope training

Full details for this standard will be published shortly

Telescopic handler: suspended loads (non-rough terrain) practical test

Full details of this standard will be published shortly.

Telescopic handler: suspended loads (non-rough terrain) training

Full details for this standard will be published shortly

Telescopic handler: up to 9 meters practical test

Full details of this standard will be published shortly.

Telescopic handler: up to 9 meters training

Full details for this standard will be published shortly

Temporary support, excavation and underpinning

The standard is in development and will be published shortly.

Temporary surface protection

The purpose of this standard is to provide the candidate with the knowledge and skills to install temporary surface protection for façade preservation.

Temporary surface protection, structure and public

This training standard is in development and will be published shortly.

Temporary suspended access cradle operator

The purpose of this standard is to cover information relating to all aspects of operation of temporary suspended access equipment especially with regards to safety, technical processes and emergency procedures.

Temporary works co-ordinator piling

The purpose of this standard is to train supervisors and engineers in the piling industry on specific Temporary Works requirements.

Temporary works coordinator

This training standard is also known as: Temporary Works Coordinator Training Course (TWCTC). It is is in development and will be published shortly.

Temporary works general awareness

This training standard is also known as: Temporary Works General Awareness Training Course (TWGATC). It is in development and will be published shortly.

Temporary works supervisor

This training standard is also known as: Temporary Works Supervisor Training Course (TWSTC). It is in development and will be published shortly.

Tensioned access platforms for managers

This training standard is in development and will be published shortly.

Testing and repair

The purpose of this standard is to provide the candidate with the knowledge to maintain a single ply roof including: inspection, integrity testing, moisture detection, and repairing.

Theory and practice of surface dressing introduction

This training standard is in development and will be published shortly

Thermal acoustic and underfloor heating

This training standard is in development and will be published shortly

Thermal insulation for single ply roofing

The purpose of this standard is to provide the candidate with the knowledge to install thermal insulation.

Thermit OXY lance gas cutting

This training standard is in development and will be published shortly

Thermography for building inspections

This training standard is in development and will be published shortly

Thermography introduction

The purpose of training delivered against this standard is to provide candidates with knowledge and skills to apply thermography as a diagnostic aid to determine the performance of a building.

Thermoplastic operational safety

The purpose of this standard is to provide knowledge and skills for safely using thermoplastic line marking materials, tools, and equipment; including vehicle, machine, and manual methods.

Thorough examination of lifting accessories


Tiling in wet rooms

The purpose of this standard is to provide the candidate with the knowledge and skills to select and install tiling in wet rooms such as: bathrooms, kitchens, toilets, laundries, steam rooms, and swimming pool areas.

Tiling to calcium sulfate (anhyrdrite) screeds

The purpose of this standard is to provide the candidate with the knowledge and skills to install pump-applied self-smoothing screeds based on a binder of calcium sulphate, in a weather-tight building envelope.

Tiling to heated floors

The purpose of this standard is to provide the candidate with the knowledge and skills to install tiles over water-based and electrical-based heating systems, including: ceramic tiles, natural stone stiles, and resin agglomerated tiles.

Tiling to raised flooring system supported by pedestals

The purpose of this standard is to provide the candidate with the knowledge and skills to install tiling on a raised flooring system that is supported by pedestals.

Tiling with resin agglomerated tiles

The purpose of this standard is to provide the candidate with the knowledge and skills to select and install resin agglomerated tiles, typically of: marble, granite, and quartz.

Timber and panel products and uses

This training standard is in development and will be published shortly

Timber conservation and repairing timber frames

This intermediate level standard provides the learner with the underlying knowledge to repair and maintain traditional timber frame structures.

Timber frame repair using flexible epoxy resin

This training standard is in development and will be published shortly

Timber frame systems introduction

The purpose of training delivered against this standard is to provide candidates with an introduction to timber frame systems.

Tool and Equipment Hire Management (TEHM) – dust management essentials

This standard is in development and will be published shortly

Tool and Equipment Hire Management (TEHM) – hand arm vibration essentials

This standard is in development and will be published shortly

Tool and equipment hire management (TEHM) – management and leadership essentials

This standard is in development and will be published shortly

Tool and Equipment Hire Management (TEHM) – noise management essentials

This standard is in development and will be published shortly

Tool hire product awareness training (THPAT) - access equipment

This standard is in development and will be published shortly

Tool hire product awareness training (THPAT) - cleaning and decorating

The purpose of this standard is to train candidates in the hire sector to operate, demonstrate the operation and select accessories for cleaning and decorating hire fleet assets.

Tool hire product awareness training (THPAT) - concrete equipment

The purpose of this standard is to train candidates in the hire sector in operating, demonstrating basic operation, and selecting accessories for concrete equipment hire fleet assets.

Tool hire product awareness training (THPAT) - engineering, access, small construction plant

The purpose of this standard is to train candidates in the hire sector to operate, demonstrate operation and select accessories for access hire fleet assets.

Tool hire product awareness training (THPAT) - for woodworking equipment

This standard is in development and will be published shortly

Tool hire product awareness training (THPAT) - for mechanical equipmentTool hire product awareness training (THPAT) - for mechanical equipment

This standard is in development and will be published shortly

Tool hire product awareness training (THPAT) - for core cutting and gas nailers

This standard is in development and will be published shortly

Tool hire product awareness training (THPAT) - for non-mechanical equipment

This standard is in development and will be published shortly

Tool hire product awareness training (THPAT) - health and safety in the workplace

This standard is in development and will be published shortly

Tool hire product awareness training (THPAT) - heating, drying, LPG and air conditioning equipment

This standard is in development and will be published shortly

Tool hire product awareness training (THPAT) - MEWPs and mobile tower

The purpose of this standard is to train candidates in the hire sector to operate and demonstrate operation, and select accessories relating to Mobile Elevated Work Platforms (MEWPs) and Mobile Tower hire fleet assets.

Tool hire product awareness training (THPAT) - small plant

This standard is in development and will be published shortly

Tool hire product training for angle grinders, chop saws 

This training standard includes the standards for the 'Tool hire product training advanced' and 'Tool hire product training basic' standards. The standard is in development and will be published shortly.

Tool hire product training for core cutters, gas nailers

This training standard includes the standards for the 'Tool hire product training advanced' and 'Tool hire product training basic' standards. The standard is in development and will be published shortly.

Tool hire product training for generators and lighting towers

This training standard includes the standards for the 'Tool hire product training advanced' and 'Tool hire product training basic' standards. The standard is in development and will be published shortly.

Tool hire product training for hammers, breakers, drills

This training standard includes the standards for the 'Tool hire product training advanced' and 'Tool hire product training basic' standards. The standard is in development and will be published shortly.

Tool hire product training for saws, planers, sanders, cutters, trimmers, mowers, washers

This training standard includes the standards for the 'Tool hire product training advanced' and 'Tool hire product training basic' standards. The standard is in development and will be published shortly.

Tools and equipment used with single ply roofing

The purpose of this standard is to provide the candidate with the knowledge of how to set up, use, check, maintain and store, hand & power tools and equipment including personal protective equipment (PPE), for installation and maintenance of single ply roofing.

Top and finishing coats

This training standard is in development and will be published shortly.

Total station for construction

This standard covers the principles of using a Total Station for site surveying and setting out. These principles can be applied to all types of construction including earthworks, roads, houses, buildings, foundations, piles, structural steel, structures and reinforced concrete.

Tower crane operator rescue

This standard is in development and will be published shortly

Tower crane theory test

Full details of this standard will be published shortly

Tower crane: luffing jib, cab controlled practical test

Full details of this standard will be published shortly.

Tower crane: luffing jib, cab controlled training

Full details for this standard will be published shortly

Tower crane: trolley jib remote practical test

Full details of this standard will be published shortly.

Tower crane: trolley jib, cab controlled practical test

Full details of this standard will be published shortly.

Tower crane: trolley jib, cab controlled training

Full details for this standard will be published shortly

Tower crane: trolley jib, remote training

Full details for this standard will be published shortly

Towers for instructors

This standard ensures that operatives are trained in how to safely assemble, dismantle and relocate access towers without risk of personal injury to the self or others. This training standard was previously held under the occupational area Scaffolding.

Towers for managers

This standard ensures that managers who responsible for overseeing the work of operatives on site. It is designed to ensure that when working at height using mobile access towers work is properly planned and organised and that those involved on site are competent and properly trained. This training standard was previously held under the occupational area Scaffolding.

Towers for professional riggers

This standard ensures that operatives are trained in how to create complex and unusual builds without risk of personal injury to the self or others. This training standard was previously held under the occupational area Scaffolding.

Towers for users

This standard ensures that operatives are trained in how to safely assemble, dismantle and relocate access towers without risk of personal injury to the self or others. This training standard was previously held under the occupational area Scaffolding. It incorporates the standard Mobile access towers.

Towers on stairways for users

This standard ensures that operatives are trained in how to build stepped towers and hazards specific to using them on a stair in keeping with current legislation, regulations and guidance for towers in general. This training standard was previously held under the occupational area Scaffolding.

Towers with bridges for users

This standard ensures that operatives are trained in how to safely assemble, dismantle and relocate access towers without risk of personal injury to the self or others. This training standard was previously held under the occupational area Scaffolding.

Track induction

This training standard is in development and will be published shortly

Track sawing

The purpose of training against this standard is to provide the candidates with the knowledge and understanding of carrying out track sawing operations safely.

Track sawing advanced 

This standard covers the training requirements for advanced track sawing activities.

Tracked dumper operation

This training standard is in development and will be published shortly

Tracked loading shovel practical test

Full details of this standard will be published shortly.

Tracked loading shovel theory test

Full details of this standard will be published shortly

Tracked loading shovel training

Full details for this standard will be published shortly

Traditional advanced hard metal craft

The purpose of this standard is to allow experienced hard metalworkers to extend their skills to cover more complicated roof shapes and methods required for the maintenance of the nation’s historic, and listed, buildings. It covers spires and cupolas using hollow wood cored rolls and welted joints.

Traditional advanced leadwork craft

The purpose of this standard is to allow experienced Leadworkers to extend their skills to cover more complicated roof shapes and casting methods required for the maintenance of the nation’s historic and listed, buildings.

Traditional basic hard metal craft 

The purpose of this standard is to provide an introduction for those with little or no experience of hard metal work. It covers basic techniques for shaping and creating effective joints between sheets of hard metal.

Traditional basic leadwork craft

The purpose of training delivered against this standard is to provide candidates with an introduction to basic lead sheet bossing and welding.

Traditional intermediate hard metal craft module 1 joints, seams and flashings

The purpose of this standard is to provide a natural progression for those who have completed the Basic Hard Metal Craft course and want to gain a further recognized qualification in hard metalwork. Module 1 covers joints, seams and flashings.

Traditional intermediate hard metal craft module 2 weatherings

This standard provides a natural progression for those who have completed the Basic Hard Metal Craft course and want to gain a further recognized qualification in hard metalwork. Module 2 covers weatherings.

Traditional intermediate hard metal craft module 3 roofs and gutters

The purpose of this standard is to provide a progression for those who have completed the Basic Hard Metal Craft course and want to gain a further recognized qualification in hard metalwork. Module 3 covers roofs and gutters.

Traditional intermediate hard metal craft module 4 cladding and dormers

The purpose of this standard is to provide a progression for those who have completed the Basic Hard Metal Craft course and want to gain a further recognized qualification in hard metalwork. Module 4 covers cladding and dormers.

Traditional intermediate leadwork craft module 1 flashing details

This standard provides a natural progression for those who have completed the Basic Leadwork Craft course and want to gain a further recognised qualification in leadwork. Module 1 covers flashings.

Traditional intermediate leadwork craft module 2 weatherings

This standard provides a natural progression for those who have completed the Basic Leadwork Craft course and want to gain a further recognised qualification in leadwork. Module 2 cxovers weatherings.

Traditional intermediate leadwork craft module 3 flat and pitched roofs

This standard provides a natural progression for those who have completed the Basic Leadwork Craft course and want to gain a further recognised qualification in leadwork. Module 3 covers flat and pitched roofs.

Traditional intermediate leadwork craft module 4 cladding and dormers

This standard provides a natural progression for those who have completed the Basic Leadwork Craft course and want to gain a further recognised qualification in leadwork. Module 4 covers cladding and dormers.

Traditional screeds

This training standard is in development and will be published shortly

Traffic management equipment

This training standard is in development and will be published shortly.

Traffic management for road safety marking

This training standard is in development and will be published shortly

Traffic management in construction training

Full details of this standard will be published shortly

Trailer mounted diamond drilling rigs

This standard covers the training requirements for an operative to safely and correctly operate trailer mounted diamond drilling rigs on the job.

Transferring levels for bricklayers

This training standard is in development and will be published shortly

Trencher practical test

Full details of this standard will be published shortly.

Trencher theory test

Full details of this standard will be published shortly

Trencher training

Full details for this standard will be published shortly

Triple bar - nuclear new build sites (e-learning)

This training standard is in development and will be published shortly

Tunnel design and construction course

This training standard is in development and will be published shortly.

Tunnel survey course

This training standard is in development and will be published shortly.

Tunnelling locomotive theory test

Full details of this standard will be published shortly

Tunnelling locomotive: diesel all sizes practical test

Full details of this standard will be published shortly.

Tunnelling locomotive: diesel all sizes training

Full details for this standard will be published shortly

Tunnelling locomotive: diesel up to 10 tonnes practical test

Full details of this standard will be published shortly.

Tunnelling locomotive: diesel up to 10 tonnes training

Full details for this standard will be published shortly

Tunnelling locomotive: electric all sizes practical test

Full details of this standard will be published shortly.

Tunnelling locomotive: electric all sizes training

Full details for this standard will be published shortly

Tunnelling locomotive: electric up to 10 tonnes practical test

Full details of this standard will be published shortly.

Tunnelling locomotive: electric up to 10 tonnes training

Full details for this standard will be published shortly

Tunnelling locomotive: tandem practical test

Full details of this standard will be published shortly.

Tunnelling locomotive: tandem training

Full details for this standard will be published shortly

Tunnelling surveying

This training standard is in development and will be published shortly.

Twin blade chaser

This standard covers the training requirements for an operative in twin blade chaser activities.

Two pack polyurethanes and flexible polyesters

The purpose of this standard is to provide the candidate with the knowledge to apply two pack polyurethanes and flexible polyesters to a roof.

Types and uses of mortars used for brick and block work

The purpose of training against this standard is to provide candidates with an overview of the different mortar types and uses used in masonry.

Types of reinforced bitumen membranes flat roof build ups

This standard covers an introduction to the various types of flat roof alternatives trainees may come across.

Types of roof systems

The purpose of this standard is to provide the candidate with design and construction knowledge of different types of single ply roofing types.

Ultrasonic Testing - Plate Tester

This standard is in development and will be published shortly

Uncoupling membranes

The purpose of this standard is to provide the candidate with the knowledge and skills to install and use uncoupling membranes for internal floor tiling.

Underground health and safety course

This training standard is in development and will be published shortly.

Underground low voltage switching

This training standard is in development and will be published shortly

Understanding ADR exemptions

This training standard is in development and will be published shortly

Understanding and describing soils and rocks

This standard is in development and will be published shortly

Understanding building conservation

This training standard is in development and will be published shortly

Understanding road construction

This training standard is in development and will be published shortly

Understanding traditional building construction principles

The purpose of training delivered against this standard is to provide candidates with fundamental knowledge of the different types of building construction, and how the construction type will affect how a building performs.

Use of casing and cage vibrators

The purpose of this standard is to provide the candidate with the knowledge to use casing and cage vibrators.

Using and maintaining framing hand tools

This intermediate level standard provides the learner with the information and skills to safely and competently use and maintain framing hand tools.

Using and maintaining framing power tools

This intermediate level standard provides the learner with the information and skills to safely and competently use and maintain framing power tools.

Using constant tension variable speed winch

This training standard is in development and will be published shortly.

Utility excavations - category 3 install, inspect and remove timber support systems

This is one of the standards held by the Energy & Utility Skills Register

Utility excavations - category 4 install, inspect and remove steel support systems

This is one of the standards held by the Energy & Utility Skills Register

Utility excavations - category 5 install, inspect and remove proprietary support systems

This is one of the standards held by the Energy & Utility Skills Register

Utility excavations –  category 1 locate utility services (stand-alone 1 day course)

This is one of the standards held by the Energy & Utility Skills Register

Utility Excavations –  Category 1 Locate Utility Services (stand-alone 1 day course)

This training standard is in development and will be published shortly.

Utility excavations – category 1 to 5 (stand-alone 4 day course)

This is one of the standards held by the Energy & Utility Skills Register

Utility Excavations – Category 1 to 5 (stand-alone 4 day course)

This training standard is in development and will be published shortly.

Utility excavations – category 2 safe digging practices (stand-alone 1 day course)

This is one of the standards held by the Energy & Utility Skills Register

Utility Excavations – Category 2 Safe Digging Practices (stand-alone 1 day course)

This training standard is in development and will be published shortly.

Utility excavations – category 3, 4 and 5 install, inspect and remove timber, steel and/or proprietary support systems (stand-alone 2 day course)

This is one of the standards held by the Energy & Utility Skills Register

Utility Excavations – Category 3, 4 and 5 Install, Inspect and Remove Timber, Steel and/or Proprietary Support Systems (stand-alone 2 day course)

This training standard is in development and will be published shortly.

Utility Pipework Construction (Butt/electro fusion processes on utilities)

This is one of the standards held by the Energy & Utility Skills Register.

Utility Pipework Construction (Butt/Electro Fusion Processes on Utilities)

This training standard is in development and will be published shortly.

Utility pipework construction (low and medium pressure gas services up to 63mm)

This is one of the standards held by the Energy & Utility Skills Register

Utility pipework restoration (gas network components to operational by repair)

This is one of the standards held by the Energy & Utility Skills Register

UXO awareness

This standard is in development and will be published shortly

Vacuum excavator theory test

Full details of this standard will be published shortly

Vacuum excavator: fully powered arm practical test

Full details of this standard will be published shortly.

Vacuum excavator: fully powered arm training

Full details for this standard will be published shortly

Vacuum excavator: non lgv manual arm practical test

Full details of this standard will be published shortly.

Vacuum excavator: non lgv semi-powered arm practical test

Full details of this standard will be published shortly.

Vacuum excavator: non LGV, manual arm training

Full details for this standard will be published shortly

Vacuum excavator: non LGV, semi-powered arm training

Full details for this standard will be published shortly

Vacuum excavator: semi-powered arm practical test

Full details of this standard will be published shortly.

Vacuum excavator: semi-powered arm training

Full details for this standard will be published shortly

Vacuum excavator: trailer manual arm practical test

Full details of this standard will be published shortly.

Vacuum excavator: trailer semi-powered arm practical test

Full details of this standard will be published shortly.

Vacuum excavator: trailer, manual arm training

Full details for this standard will be published shortly

Vacuum excavator: trailer, semi-powered arm training

Full details for this standard will be published shortly

Vehicle restraint systems in construction training

This standard is available from a number of recognised awarding organisations, for example Lantra. CITB is working with these awarding organisations to map their courses to a standard. Full details of this standard will be published in due course.

Vehicle shunting (PUWER) training

Full details of this standard will be published shortly

Ventilating pitched roofing

This training standard is in development and will be published shortly.

Ventilation of enclosures used with asbestos removal

This standard covers knowledge and understanding needed to set up asbestos removal enclosures for in compliance with Regulation 16, Duty to prevent or reduce the spread of asbestos.

Ventilation systems

The purpose of this standard is to provide the candidate with knowledge of ventilation systems.

Visual concrete - perception, practicalities and specifying

The purpose of this standard is to highlight the nuances of visual concrete specification, interpretation and achievability.

VRS foundation 

This standard aims to provide foundation knowledge for all potential VRS Labourers and Installers of Permanent Vehicle Restraint Systems before proceeding to detailed training for the installation of any of the Proprietary or Non-proprietary systems.

VRS installer 

This standard aims to provide training for learners with at least 3 months experience in installing Permanent Vehicle Restraint Systems before proceeding to detailed training for the installation of any of the Proprietary or Non-proprietary systems.

VRS non-proprietary safety barrier systems (NPSBS)

The purpose of this standard is to provide the candidate with the knowledge and skills to reconstruct legacy VRS non-proprietary safety barrier systems, in a work gang (VRS – vehicle restraint systems).

VRS proprietary safety barrier systems

This training standard is in development and will be published shortly

VRS use of vehicle mounted post/pile driver (vehicle restraint systems)

The purpose of this standard is to provide the candidate with the knowledge and skills to operate a vehicle mounted post/pile driver machine, which is typically installed on crawlers or lorries, and used for installing vehicle barrier posts.

Wacker operation

This training standard is in development and will be published shortly

Waste awareness

This training standard is in development and will be published shortly

Water based finishes introduction

This training standard is in development and will be published shortly

Water cleaning equipment operation

The purpose of this standard is to provide the candidate with the knowledge and skills to operate water cleaning equipment used for façade preservation.

Water Pipeline Infrastructure Operations (DOMS - Scotland)

This is one of the standards held by the Energy & Utility Skills Register

Waterproof membrane roofing systems installation

The purpose of this standard is to provide the candidate with the knowledge and skills to install waterproof membrane roofing systems.

Waterproofing introduction

The purpose of training delivered against this standard is to provide candidates with knowledge of the principles of structural waterproofing.

Waterproofing membranes

The purpose of this standard is to provide the candidate with knowledge of waterproofing membranes and vapour control layers (VCL).

Wheeled loading shovel practical test

Full details of this standard will be published shortly.

Wheeled loading shovel theory test

Full details of this standard will be published shortly

Wheeled loading shovel training

Full details for this standard will be published shortly

WIN ALC geometry

This training standard is in development and will be published shortly

Wind post installation

The purpose of training delivered against this standard is to provide candidates with the knowledge and skill to be able to safely and effectively install a windpost.

Wire sawing

This standard covers the training requirements for an operative in wire sawing activities.

Wire sawing advanced

This standard covers the training requirements for advanced wire sawing activities.

Wood block and parquet

The purpose of training delivered against this standard is to provide delegates with an introduction to the installation of wood block and parquet wooden floors using approved methods in commercial and domestic environments.

Wood floor drying

This standard is in development and will be published shortly

Wood identification for the infestation surveyor

The purpose of training delivered against this standard is to provide candidates with the knowledge and skills to identify types of softwood and hardwood; visually, physically and microscopically.

Wood machine operations - boring

This training standard is in development and will be published shortly. This standard includes the previous standard Woodworking machine refresher.

Wood machine operations - CNC

This training standard is in development and will be published shortly. This standard includes the previous standard Woodworking machine refresher.

Wood machine operations - edge finishing

This training standard is in development and will be published shortly. This standard includes the previous standard Woodworking machine refresher.

Wood machine operations - jointing

This training standard is in development and will be published shortly. This standard includes the previous standard Woodworking machine refresher.

Wood machine operations - planing

This training standard is in development and will be published shortly.This standard includes the previous standard Woodworking machine refresher.

Wood machine operations - profiling

This training standard is in development and will be published shortly. This standard includes the previous standard Woodworking machine refresher.

Wood machine operations - sanding

This training standard is in development and will be published shortly. This standard includes the previous standard Woodworking machine refresher.

Wood machine operations - sawing

This training standard is in development and will be published shortly. This standard includes the previous standard Woodworking machine refresher.

Wood machine operations - tooling

This training standard is in development and will be published shortly. This standard includes the previous standard Woodworking machine refresher.

Wood machine operations - window centre

This training standard is in development and will be published shortly. This standard includes the previous standard Woodworking machine refresher.

Wood pole conductor stringing high voltage/low voltage

This training standard is in development and will be published shortly.

Wood science

The purpose of training delivered against this standard is to provide delegates with an introduction to wood science for flooring.

Wood waste and resource efficiency e-learning

This training standard is in development and will be published shortly

Woodworking portable power tools

This training standard is in development and will be published shortly

Work practice and project planning

This training standard is in development and will be published shortly

Work practice and project planning for resin flooring

This training standard is in development and will be published shortly

Work practice and project planning for screed flooring

This training standard is in development and will be published shortly

Work practice and project planning for surface preparation

This training standard is in development and will be published shortly

Working at height awareness in construction

This training standard is in development and will be published shortly

Working at height for lightning conductor engineers

This training standard is in development and will be published shortly.

Working under live OLE

This training standard is in development and will be published shortly

Working with lead alternatives

This training standard is in development and will be published shortly.

Working with plant equipment in construction training

Full details for this standard will be published shortly

Workmanship and quality

This training standard is in development and will be published shortly.