Search results

The purpose of this standard is to provide the learner with the knowledge and skills to support the following scope: demonstration of work skills to prepare, load, protect, communicate, measure, assemble, position, secure and clean. use and maintain hand and power tools, airless spray equipment and associated equipment. set up and adjust spray equipment to achieve the finish stated in the given working instructions, relating to the following: preparation of coatings, loading the system, monitor and maintain supply, apply water-borne or solvent-borne coatings by airless spray.

---

The purpose of this standard is to provide the learner with the knowledge and skills to support the following scope: demonstration of work skills to prepare, load, protect, communicate, measure, assemble, position, secure and clean, use and maintain hand and power tools, airless spray equipment and associated equipment, set up and adjust spray equipment to achieve the finish stated in the given working instructions, relating to the following: preparation of coatings, loading the system, monitor and maintain supply, apply water-borne or solvent-borne coatings by airless spray.

---

The purpose of this standard is to provide the learner with the knowledge and skills to support the following scope: demonstration of work skills to prepare, load, protect, measure, assemble, position, secure and clean, use and maintain hand tools, power tools, air spray equipment and associated equipment, set up and adjust spray equipment (high-volume low-pressure [HVLP] systems) to achieve the finish stated in the given working instructions, relating to: preparation of coatings, loading the system, monitoring and maintaining supply, apply water-borne or solvent-borne coatings by high-volume low-pressure [HVLP] air spray systems

---

The purpose of this standard is to provide the learner with the knowledge and skills to support the following scope: demonstration of work skills to prepare, load, protect, measure, assemble, position, secure and clean, use and maintain hand tools, power tools, air spray equipment and associated equipment, set up and adjust spray equipment (high-volume low-pressure [HVLP] systems) to achieve the finish stated in the given working instructions, relating to: preparation of coatings, loading the system, monitoring and maintaining supply, apply water-borne or solvent-borne coatings by high-volume low-pressure [HVLP] air spray systems.

---

This standard is about applying printed murals to a wall area. It includes working with different types of murals and understanding their advantages and disadvantages. The standard also includes the required preparation of the wall area before applying the mural, the availability and suitability of different types of adhesive, Measuring, setting out and applying the mural to the wall.

---

The purpose of this standard is to provide the delegate with the knowledge to further support their learning with the following: carrying out pre and post installation checks; types of surface finishes; hazards with resources; protecting work and work area from damage; minimising thermal bridging; installing vapour control barriers; recognising specific requirements for structures of special interest, traditional construction and historical significance; recognising when specialist skills are required; how to communicate with your team and others; looking after tools and equipment; working at height and safe use of access equipment and harness systems.

---

This standard focuses on the key knowledge and in-depth understanding in relevant architectural areas.

---

This training standard is being withdrawn and grant is no longer available for achievements from 01/04/2024

---

This training standard is being withdrawn and grant is no longer available for achievements from 01/04/2024

---

The purpose of this standard is to provide the candidate with the knowledge and skills to install liquid roofing on: balconies, podiums and inverted roof systems.

---