- Published
- Insulation and building treatments
- Assured
- £140 (Tier 2)
- GET3271
The purpose of this standard is to provide the delegate with the knowledge to support the following:
Interpreting information.
Understanding current legislation, standards and official guidance.
Checking the suitability, compatibility and characteristics of the materials, components and finishes and determine if they are moisture open or moisture closed and their impact on the building.
Carrying out pre-installation checks.
Identifying common building defects.
Recording and reporting issues or defects with materials.
Implication of the type of construction and materials for the introduction of energy efficiency measures.
Sequencing of energy efficiency measures.
Understanding how continuity of insulation and building treatments can prevent problems.
Causes of mould and fungal decay.
Impact of ventilation and air flow.
Specific requirements for buildings and structures with statutory protection, of traditional construction, hard to treat and buildings of historical significance.
- Published
- Interior systems
- Assured
- £60 (Tier 1)
- GET2699
The purpose of this standard is to provide the candidate with practical knowledge and skills required to maintain and safely use hand and power tools.
- Published
- Home building
- Assured
- £60 (Tier 1)
- GET1873
The purpose of training delivered against this standard is to provide candidates with an introduction to site plans and drawings used in the house building sector.
- Published
- Painting and decorating
- Assured
- £60 (Tier 1)
- GET2571
The HVLP course is designed to teach decorators about the use of high volume low pressure spray equipment both with a turbine and a compressor.
- Published
- Piling
- Assured
- £60 (Tier 1)
- GET1875
The purpose of this standard is to enable the candidate to develop their knowledge of piling technologies and how and when the different techniques are used and help contribute to a safe and effective working environment.
- Published
- Working at height
- Recognised
- £140 (Tier 2)
- GET1322
The purpose of this training standard is train instructors to sufficient competency to be able to deliver a complete Ladder Association User and Inspection course.
- Published
- Working at height
- Recognised
- £140 (Tier 2)
- GET1330
This standard ensures that operatives are trained in how to safely assemble, dismantle and relocate access towers without risk of personal injury to the self or others.
- Published
- Surveying and setting out
- Assured
- £140 (Tier 2)
- GET3038
The purpose of this standard is to provide the delegate with the knowledge to support the following: the principles and practices of laser scanning for use in construction specific contexts and covers the practical elements, relevant theory, use of software and considerations when working in a public area.
- Published
- Roofing (metal)
- Assured
- £240 (Tier 3)
- GET3301
The purpose of this standard is to provide the delegate with the knowledge to support the following:
• understanding of the Code Of Practice Design Recommendations.
• correct use of welding equipment.
• how to fabricate substrate of Dormer with underlay and wood rolls.
• understand the ventilation pathways and details.
• correct use of tools to fabricate & install gutter front apron with dormer cheeks and upstand flashings.
• how to fabricate & install dormer cheeks with front jamb, revel and head coverings.
• understand types of dormer roof and associated drainage.
• how to Install dormer cover using central wood roll, rear upstand to tiled/slated roof with fixed welted edge down stand.
• correct way to recycle waste materials