- Published
- Insulation and building treatments
- Assured
- £60 (Tier 1)
- GET3015
The purpose of this standard is to provide the delegate with the knowledge to further support their learning with the following: carrying out pre and post installation checks; types of surface finishes; hazards with resources; protecting work and work area from damage; minimising thermal bridging; installing vapour control barriers; recognising specific requirements for structures of special interest, traditional construction and historical significance; recognising when specialist skills are required; how to communicate with your team and others; looking after tools and equipment; working at height and safe use of access equipment and harness systems.
- Published
- Plastering
- Assured
- £140 (Tier 2)
- GET2149
The purpose of this standard is to provide the candidate with the knowledge and skills to apply venetian polished plaster and micro cement to an existing dry lined or wet-plastered wall and ceiling. This scope of this standard excludes dry lining or wet-plastering of a wall or ceiling.
- Published
- Construction (common)
- Assured
- £240 (Tier 3)
- GET3484
The purpose of this standard is to outline the training that is needed to become a competent installer of Architectural and Decorative metalwork.
- Published
- Construction (common)
- Assured
- £120 (Tier 3 – refresher)
- GET3486
The purpose of this standard is to refresh the training that is needed to become a competent installer of Architectural and Decorative metalwork.
- Published
- Construction (common)
- Assured
- £240 (Tier 3)
- GET3485
The purpose of this standard is to outline the training that is needed to become a competent installer of Architectural and Decorative timber.
- Published
- Construction (common)
- Assured
- £120 (Tier 3 – refresher)
- GET3487
The purpose of this standard is to refresh the training that is needed to become a competent installer of Architectural and Decorative timber.
- Published
- Construction (common)
- Recognised
- £140 (Tier 2)
- GET2938
This 4-day course provides both the knowledge and understanding required to air tightness test single dwellings and other small simple buildings.
- Published
- Roofing (liquid)
- Assured
- £140 (Tier 2)
- GET1822
The purpose of this standard is to provide the candidate with the knowledge and skills to install liquid roofing on: balconies, podiums and inverted roof systems.
- Withdrawn
- Utilities
- Recognised
- £60 (Tier 1)
- GET0343
This standard in development is being deactivated as it is being replaced by Full standards:
Power Networks - Access, Movement & Egress (BESC/AME) Underground Cables,
Power Networks - Access, Movement & Egress (BESC/AME) Overhead Lines.
- Published
- Roofing (slating and tiling)
- Assured
- £60 (Tier 1)
- GET2355
The purpose of this standard is to provide the candidate with the knowledge and skills to install battens and membrane for a new slate and/or tile roof.