Search results

The purpose of this standard is to provide the delegate with the knowledge to further support their learning with the following: understanding the characteristics of resources; organisational procedures for selecting resources; identifying potential hazards with resources; protecting work and work area from damage; understanding work programmes; how to communicate with your team and others; carrying out external and internal pre and post installation checks; installing pre-finished or non-finished insulation systems; minimising thermal bridging; installing vapour control barriers; risks associated with ventilation and combustion appliances; recognising specific requirements for structures of special interest, traditional construction and historical significance; recognising when specialist skills are required; disposing of waste; looking after tools and equipment; working at height; safe use of access equipment and harness systems.

---

The purpose of this standard is to provide the learner with the knowledge and skills to support the following scope: identify different types of stone, identify the type being used and select the most appropriate piece available, check for and identify faults within the stone, mark out and cut a six-sided stone block to a specification using manually operated equipment, reference the cut stone block, apply a finish to the stone block, stack, store and protect a sawn stone product

---

This standard is held by NSAR

---

This training standard is in development and will be published shortly

---

This training standard is in development and will be published shortly

---

This training standard is in development and will be published shortly

---

The purpose of this standard is to provide the delegate with the knowledge to support the following scope: methods for mixing and installing resin bound surfaces. use and maintain tools required. handling, storage and health and safety, preparation process for installation, common problems and how to avoid / resolve them, installation of a resin bound and bonded surface

---

The purpose of this standard is to provide the delegate with the knowledge to support the following: challenges of retrofit principles of retrofit installing insulation whole building approach

---

This training standard is in development and will be published shortly

---

The purpose of this standard to enable learners to learn how to use a Robotic Total Station. The content is relevant to all types of construction including earthworks, roads, houses, buildings, foundations, piles, structural steel, structures, and reinforced concrete.

---