Using and maintaining framing power tools
Overview
Duration
1 day of 6 learning hours
Purpose/scope
The purpose of this standard is to provide the delegate with the knowledge and skills to safely and competently, use and maintain framing power tools.
Scope:
- personal protective equipment (PPE)
- respiratory protective equipment (RPE)
- using specific framing power tools safely
- using specific framing power tools effectively and efficiently
- storing tools in a suitable way to avoid damage or hazard
- maintaining tools in a good working order
- identifying and correcting defects.
Occupational relevance
Training delivered against this standard would be relevant to the following occupational groups:
-
operative and craft.
Delegates pre-requisites
Delegates should already be working in a structural framing occupation and have significant relevant carpentry experience.
Instruction/supervision
As a minimum, course trainers must be able to demonstrate that, in relation to this standard, they have:
- an award in education and training (or equivalent, as per requirements for approved training organisations)
- successfully completed training to this standard
- at least 2 years relevant industrial experience
- a verifiable CV.
Delivery
Delivery may be in an on or off the job environment.
All materials and equipment must be of a suitable quality and quantity for delegates to achieve learning outcomes and must comply with relevant legislation.
The class size and delegate/trainer ratio must allow training to be delivered in a safe manner and enable delegates to achieve the learning outcomes.
The following delivery methods may be used in the delivery of this standard:
-
classroom
This standard is considered to contain 51% or more practical training.
This standard is considered to be set at an intermediate level.
Assessment
For the successful completion of training, delegates must complete an end of course practical assessment or knowledge test that measures all learning outcomes and has a pass or fail criteria.
Where this training is assessed using multiple-choice questions, a minimum of 10 questions must be asked and delegates are required to achieve an overall pass mark of at least 80%.
Quality assurance
Assured
Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.
CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the training standard.
Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk-based analysis. They will also be visited annually by the CITB quality assurance team.
Renewal
There are no mandatory renewal or recommended refresher requirements for this standard.
Classification
Lifetime (please note standards using this classification will only be grant aided once per delegate).
Keywords
Maintain Framing Power Tools
Approval date
March 2021
Review cycle
On request or 3 years from approval date.
Learning outcomes
|
The delegate will be able to: |
Additional guidance to support learning outcome |
|---|---|
|
select, fit and use the appropriate Personal Protective Equipment (PPE) |
to include:
|
|
store, maintain and report defects in training and work equipment |
to include:
|
|
identify which power tool is appropriate for the task |
to include:
|
|
carry out pre-use checks |
to include:
|
|
set up the machine according to manufacturer’s instructions |
|
|
describe how to check waste removal is operating correctly |
|
|
demonstrate knowledge of safe working environment with regards to work positioning |
to include:
|
|
explain the workshop procedure for putting a faulty tool out of use |
|
|
use a Power Mortiser adhering to safety and efficiency best practise standards |
to include:
|
|
use a Circular Saw adhering to safety and efficiency best practise standards |
to include:
|
|
use a Drill adhering to safety and efficiency best practise standards |
to include:
|
|
use a Beam Planer adhering to safety and efficiency best practise standards |
to include:
|
|
use a Carpenters Chainsaw adhering to safety and efficiency best practise standards |
to include:
|
Additional information about this standard
Recommended reading:
- OAK FRAMED BUILDINGS – Rupert Newman
- FRAMING ROOFS – The best of Fine Homebuilding
- BARNS OF RURAL BRITAIN –Graham Hughes ISBN 0-906969-36-0
- TIMBER FRAME – Ted Benson ISBN 1-56158-281-6
- TIMBER FRAMED BUILDINGS – John Bailey Bed Bucks and Cam Historic Building Research Group
- CONSERVATION OF TIMBER BUILDINGS – F. W. B. Charles ISBN 0-7487-0376-4
Related standards
- Oak frame sector introduction
- Using and maintaining framing hand tools
- Lifting & moving heavy timbers
- Scribing timbers for structural timber frames
- Design & drawing for structural timber frames
- Selecting, converting and grading timber
- Introduction to joint design and frame engineering
- Setting out structural timber frames
- Fabricating structural timber frames
- Site erection of structural timber frames
- Timber conservation & repairing timber frames