Facebook Pixel
Skip to content

Fitted furniture renovation

We have doubled the grant rates for short course tiers 1 – 3. To address rising costs, you can now receive higher rates on course achievements from 1st April 2023

Grant Tier

Achievement date before 1 April 2023

Achievement date on or after 1 April 2023

Grant Tier 1

Grant Tier 1 Refresher

£30

£15

£60

£30

Grant Tier 2

Grant Tier 2 Refresher

£70

£35

£140

£70

Grant Tier 3

Grant Tier 3 Refresher

£120

£60

£240

£120

Overview

The aim of this course is to introduce decorators into the process of painting furniture on site using an airless sprayer.

Standard details

CITB has developed this standard in discussion with industry. 

Duration

Minimum 12 day of 6 learning hours

Purpose / Scope

The aim of this course is to introduce decorators into the process of painting furniture on site using an airless sprayer.

The course is designed for decorators who have some experience of airless spraying or have done an introduction to airless spraying.

The scope covers:

  • Removing doors and labelling
  • How to handle the edges of MDF furniture
  • How to spray the carcass part of the furniture
  • How to spray the doors
  • The use of drying racks and drying rooms
  • How to avoid overspray ruining the finish
  • How to professionally caulk and fill joints and gaps
  • How to sand and prepare for the next coat
  • Applying finishing coats

Occupational relevance

Training delivered against this standard would be relevant to the following occupational groups:

  • operative and craft

Candidate pre-requisites

Candidates must have successfully completed the Introduction to airless spraying course within the last 2 years or have extensive experience with an airless sprayer and be able to demonstrate knowledge of the health and safety aspects of spraying.

Instruction / supervision

As a minimum, course instructors must be able to demonstrate that in relation to this standard they have:

  • A train the trainer or instructional techniques course certificate 
  • Successfully completed training to this standard 
  • At least 5 years relevant industrial experience
  • A verifiable CV
  • Current experience in the industry.

Delivery

Delivery is in an off the job environment. Suitable areas must be available in the workshops to give enough spraying experience to the students. There needs to be a classroom environment to cover the underpinning knowledge.

All materials and equipment must be of a suitable quality and quantity for candidates to achieve learning outcomes and must comply with relevant legislation.

Materials must be from a range of manufacturers to give the student and understanding of what different brands of paint are like to spray.

The class size and candidate/instructor ratio must allow training to be delivered in a safe manner and enable candidates to achieve the learning outcomes. A class size of 6 students to 1 tutor is recommended.

The following delivery methods may/may not be used in the delivery of this standard:

  • Classroom
  • Workshop

Assessment

For the successful completion of training, candidates must complete an end of course practical assessment and knowledge test that measures the learning outcomes and has a pass or fail criteria.

Quality assurance

Quality Assurance against this standard will require initial approval of the training organisation and their content mapped to the standard. 

CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the Training Organisation can meet the requirements of the Training Standard. 

Approved Training Organisations will be required to present information on records of training and assessment upon request to CITB for desk based analysis.  They will also be visited annually by the CITB Quality Assurance team.

Renewal / refresher

Non mandatory refresher every 5 years

Approval date

TBC

Review cycle

Either on request or in 3 year(s) from approval date.

Learning outcomes

The candidate will be able to:

Learning outcomes
The candidate will be able to: Additional guidance to support learning outcome
The student will know which paints are the most suitable for painting furniture and how to prepare them.
  • A range of paints are looked at. Customers will ask for a wide range of furniture to be painted from a full melamine kitchen to solid oak bedframes and it is important to understand products and systems that work.
The student will know how to prepare the unit to be painted.
  • Preparation is key and different surfaces need different preparation.
The student will be able to remove the doors and label them up correctly.
  • This is where it is important to understand that when you take a kitchen apart, it needs to go back together the same way to avoid any issues.
The student will be able to prepare the edges of the MDF to give a professional finish.
  • Although not all furniture is made from MDF, this can be one of the more difficult substrates to handle. Here we look at turning the edges into a super smooth professional finish.
The student will be able to spray the carcass of the furniture correctly without runs or defects
  • Spraying into the cupboards or carcass is very difficult because of the confined space and the blowback from the spray process. Here we look at the correct technique as well as some of the things that don’t work and why.
The student will be able to spray the doors of the furniture correctly.
  • The doors have been removed and we look at the best way to actually spray the whole of the door in one process and then place it for drying so that it does not get damages. Racking systems are looked at here and the advantages and disadvantages of each system.
The student will be able to fill and caulk the furniture professionally
  • For furniture fitted on site this is a big advantage to get that truly fitted furniture look. This will look at the best way to get a perfect finish on all the filling and caulking. What works on a skirting will not work on an expensive piece of furniture.
The student will be able to sand and prepare the furniture to give a professional finish.
  • This looks at products that are available to get that flawless finish on furniture.
The student will be able to apply the final coats without runs, defects or overspray.
  • Hints and tips on that final coat.

Additional information about this standard

This standard has been designed specifically for spraying furniture on site and does not cover systems and products that would be used in a spray booth. This standard has also been designed for spraying by airless sprayer. There is a different course which looks at other methods of spraying however this is not within the scope of this course.