Search results

The purpose of this standard is to provide the delegate with the knowledge to support the following: types and correct use of PPE, using barriers and signage, identifying protected species, preparing timber treatment products and biocides, safe and secure disposal of waste

---

The purpose of this standard is to provide the delegate with the knowledge to further support their learning with the following: understanding the characteristics of resources; organisational procedures for selecting resources; identifying potential hazards with resources; protecting work and work area from damage; understanding work programmes; how to communicate with your team and others; carrying out external and internal pre and post installation checks; installing pre-finished or non-finished insulation systems; minimising thermal bridging; installing vapour control barriers; risks associated with ventilation and combustion appliances; recognising specific requirements for structures of special interest, traditional construction and historical significance; recognising when specialist skills are required; disposing of waste; looking after tools and equipment; working at height; safe use of access equipment and harness systems.

---

The purpose of this standard is to provide the delegate with the knowledge to support the following: the factors that impact productivity of site project delivery in construction companies and projects; the compelling need for change in the construction industry, and more.

---

The purpose of this standard is to provide the delegate with the knowledge and skills to support the following: identifying rising damp, using moisture meters, controlling rising damp, interpreting information, setting up equipment, stepped drilling procedures, types of damp-proof treatments, the importance of re-plastering, safe disposal of waste

---

This standard covers the additional knowledge and skills to support trainees' development towards their Level 2 NVQ Diploma in Removal of Hazardous Waste (Licensed Asbestos).

---

This is one of the standards held by the Energy & Utility Skills Register

---

The purpose of this standard is to provide the delegate with the knowledge to support the following: understanding of the Code of Practice Design Recommendations. correct use of welding equipment. correct use of equipment to fabricate and install decorative sheet roofing. how to prepare Spire or Dome with underlay including joints & panels. how to install herringbone pattern with hollow rolls. how to install herringbone pattern with wood cored rolls. how to install welt joints & fixings. how to install hollow rolls, wood core rolls & welted joints to barrel vaulted roof with ridge & hip details. correct way to fabricate rainwater pipe & box hopper. preparing patterns before casting. Understanding of the regulations when working on heritage buildings or within conservation areas. lead casting simple embellishments using sand box technique. correct way to recycle waste materials.

---

The purpose of this standard is to provide the delegate with the knowledge and skills to support the following: interpreting information, deploying signage and barriers, preparing, identifying services, repairing and renewing floor-boards, repairing and renewing decayed joist end(s) and wall plate(s), removing existing timber floor(s), laying suspended timber floor(s), repairing timber stud partition(s), replacing decayed timber lintels and trimmers, installing sub floor air vent(s), safe disposal of waste.

---

This standard is exclusively for use by Approved Training Organisations (ATOs). The purpose of this standard is to enable the delegate to develop an understanding of how stakeholder and client relationships and the monitoring and control of costs and waste contribute to making an organisation commercially successful as required by a practising or potential site supervisor.

---

This training standard is in development and will be published shortly

---